Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Adjusting the Projector Function (“PRJ-ADJ” Menu)<br />
(Continued)<br />
Filter Message<br />
You can select the interval time to display a<br />
message for cleaning the filter.<br />
Clean The Filter.<br />
Selectable items<br />
Off<br />
100H/200H/<br />
500H/1000H<br />
3D MODE<br />
Description<br />
Not displaying the message.<br />
Select the interval time to display<br />
a message.<br />
You can set “DLP ® Link TM ” and “DLP ® Link TM<br />
Invert”. See “Using 3D Viewing Mode” on<br />
page 59 for details.<br />
Setting the LAN/RS232C<br />
You can select “LAN” or “RS232C” and<br />
selected terminal is only used.<br />
■<br />
IP Address/Subnet Mask/Gateway/<br />
DNS/Apply<br />
Selectable<br />
items<br />
IP Address<br />
Subnet<br />
Mask<br />
Gateway<br />
DNS<br />
Apply<br />
Menu operation n Page 41<br />
Description<br />
Factory default setting:<br />
192.168.150.002<br />
Enter an IP address appropriate for the<br />
network.<br />
Factory default setting:<br />
255.255.255.000<br />
Set the subnet mask to the same as<br />
that of the computer and equipment on<br />
the network.<br />
Factory default setting:<br />
000. 000. 000. 000<br />
* When not in use, set to “000. 000.<br />
000. 000”.<br />
Factory default setting:<br />
000. 000. 000. 000<br />
* When not in use, set to “000. 000.<br />
000. 000”.<br />
Apply and save the new settings.<br />
Selectable<br />
items<br />
LAN<br />
RS232C<br />
■ Link<br />
Selectable<br />
items<br />
Connected<br />
Disconnected<br />
Description<br />
The LAN function is activated.<br />
The RS-232C function is activated.<br />
Setting the Network<br />
Description<br />
Connected to the network.<br />
Disconnected from the network.<br />
Note<br />
• Confi rm the existing network's segment (IP<br />
address group) to avoid setting an IP address<br />
that duplicates the IP addresses of other<br />
network equipment or computers. If<br />
“192.168.150.002” is not used in a network<br />
with an IP address of “192.168.150.XXX”, you<br />
don't have to change the projector IP address.<br />
• For details about each setting, consult your<br />
network administrator.<br />
■ DHCP Client<br />
Connect the LAN cable before turning the<br />
projector on. If not, the DHCP Client function<br />
does not work. If the DHCP server is not<br />
available, set the IP Address, Subnet Mask,<br />
Gateway and DNS manually.<br />
Selectable<br />
items<br />
On<br />
Off<br />
Description<br />
Obtains confi guration parameters for IP<br />
Address, Subnet Mask, Gateway, and<br />
DNS automatically.<br />
Set the IP Address, Subnet Mask,<br />
Gateway, and DNS manually.<br />
54