Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Adjusting the Projector Function (“PRJ-ADJ” Menu)<br />
Menu operation n Page 41<br />
Picture SIG-ADJ Video SCR-ADJ PRJ-ADJ<br />
Picture SIG-ADJ Video SCR-ADJ<br />
PRJ-ADJ<br />
Auto Search<br />
Off<br />
Ex. Setting<br />
Auto Power Off<br />
Auto Restart<br />
ECO + Quiet<br />
Lamp Mode<br />
Audio<br />
Ex. Setting<br />
Reset<br />
Information<br />
Off<br />
Off<br />
Off<br />
Both Lamps<br />
Fan Mode<br />
STANDBY Mode<br />
Standby Audio Out<br />
Filter Message<br />
3D MODE<br />
LAN/RS232C<br />
Network<br />
Normal<br />
Standard<br />
On<br />
500H<br />
LAN<br />
MENU = END SEL./ADJ. SEL. MENU = END SEL./ADJ. SEL.<br />
1 Detecting the Input<br />
Signals Automatically<br />
This function enables the projector to detect<br />
the received signal and to switch the Input<br />
mode automatically when the power is turned<br />
on.<br />
Selectable items<br />
Description<br />
On<br />
Automatically searches for and<br />
switches to the input mode in<br />
which signals are being<br />
received.<br />
Off<br />
Auto Search does not function.<br />
Note<br />
• While the “Auto Search” function is detecting<br />
the input signal, pressing a button on the<br />
projector or the remote control stops the “Auto<br />
Search” function. After the “Auto Search”<br />
function fi nishes completely, press the desired<br />
button.<br />
2 Auto Power Off Function<br />
3 Auto Restart Function<br />
Selectable<br />
items<br />
On<br />
Off<br />
Description<br />
If the power cord is unplugged from the<br />
outlet or the breaker switch is turned off<br />
when the projector is on, then the<br />
projector automatically turns on when<br />
the power cord is plugged into the AC<br />
outlet or the breaker switch is turned on.<br />
The projector does not turn on<br />
automatically when the power cord is<br />
plugged into the AC outlet or the<br />
breaker switch is turned on.<br />
To activate the Auto Restart function, you need to switch<br />
the MAIN POWER switch on the projector to “ON”.<br />
4 Eco+Quiet<br />
Selectable<br />
items<br />
Brightness and Power consumption<br />
On Approx. 83%<br />
Off 100%<br />
Selectable<br />
items<br />
On<br />
Off<br />
Description<br />
When no input signal is detected for<br />
more than 15 minutes, the projector will<br />
automatically enter Standby mode.<br />
The Auto Power Off function will be<br />
disabled.<br />
Note<br />
• When “Eco+Quiet” is set to “On”, the fan<br />
sound and power consumption are lower than<br />
they are when “Off” is selected. (Projection<br />
brightness decreases as shown in the chart.)<br />
52
Change language