You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Video Adjustment (“Video” Menu)<br />
Menu operation n Page 41<br />
Picture SIG-ADJ Video SCR-ADJ PRJ-ADJ<br />
Overscan<br />
Video System<br />
Video Setup<br />
Closed Caption<br />
On<br />
Auto<br />
7.5 IRE<br />
Off<br />
MENU = END SEL./ADJ. SEL.<br />
1Setting the Overscan<br />
This function allows you to set the overscan area<br />
(display area).<br />
Selectable<br />
items<br />
On<br />
Off<br />
Description<br />
The input area is displayed without the<br />
screen edges.<br />
The whole input area is displayed.<br />
Note<br />
• This function is available for the following<br />
signals.<br />
With COMPUTER/COMPONENT1, 2,<br />
COMPONENT or DVI-D input:<br />
- 480P<br />
- 576P<br />
- 720P<br />
- 1080I/1080P<br />
• If noise appears at the screen edges when<br />
“Off” is selected, set the function to “On”.<br />
• Also see “About Copyrights” on page 35.<br />
2 Setting the Video System<br />
The video input system mode is factory preset<br />
to “Auto”; however, a clear picture from the<br />
connected audio-visual equipment may not be<br />
received, depending on the Video signal<br />
difference.<br />
In that case, switch the Video signal.<br />
Selectable items<br />
Auto<br />
PAL<br />
SECAM<br />
NTSC4.43*<br />
NTSC3.58<br />
PAL-M<br />
PAL-N<br />
PAL-60<br />
* When reproducing NTSC signals in PAL<br />
video equipment.<br />
Note<br />
• The Video signal can only be set in S-VIDEO<br />
or VIDEO mode.<br />
• When “Video System” is set to “Auto”, you<br />
may not receive a clear picture due to signal<br />
differences. Should this occur, switch to the<br />
video system of the source signal.<br />
Useful<br />
Features<br />
47
Change language