XG-PH80W-N/X-N Operation-Manual GB

Picture Adjustment (“Picture” Menu)
(Continued)
Menu operation n Page 41
2 Adjusting the Image
Adjustment
items
Bright Boost
Bright
Contrast
Color* 1
Tint* 1
Sharp* 1
O button
To improve color
reproduction,
lower bright
boost setting.
For less
brightness.
For less
contrast.
For less color
intensity.
For making skin
tones purplish.
For less
sharpness.
*1 Not selected in the RGB input mode.
Q button
To increase
brightness,
increase bright
boost setting.
For more
brightness.
For more
contrast.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.
Note
• “Bright Boost” cannot be set when “sRGB” is
selected.
• To reset all adjustment items, select “Reset”
and press (ENTER).
Using the Ex. Setting
Select “Ex. Setting” and then press (ENTER)
to set “Signal Type”, “CLR Temp”, “Red”,
“Blue”, “C.M.S.”, “Film Mode”, “DNR” or
“Dynamic Black”.
Adjusting the Color
Temperature
Selectable
items
–1
0
1
Description
For lower color temperature for
warmer, reddish incandescent-like
images.
For higher color temperature for
cooler, bluish, fl uorescent-like images.
Note
• “CLR Temp” cannot be set when “sRGB” is
selected.
• Values on “CLR Temp” are only for general
standard purposes.
6 Adjusting the Red/Blue
Adjustment
items
O button Q button
Red For weaker red. For stronger
red.
Blue
For weaker
blue.
For stronger
blue.
Note
• “Red” and “Blue” are not adjustable/selectable
when selecting “sRGB”.
4 Signal Type Setting
This function allows you to select the input
signal for COMPUTER/COMPONENT1, 2 or
COMPONENT.
Selectable
items
Auto
RGB
YCbCr
YPbPr
Description
Input signals are automatically
recognized as RGB or component.
Set when RGB signals are received.
Set when Component signals
(480I/480P/576I/576P) are received.
Set when Component signals
(720P/1080I/1080P) are received.
44