XG-PH80W-N/X-N Operation-Manual GB

More documents

Recommendations

Info

Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to the RS-232C serial terminal on the computer, or when the LAN terminal on the projector is connected to the LAN terminal on the computer, the computer can be used to control the projector. Refer to the “SETUP MANUAL” contained on the supplied CD-ROM for details. When connecting to a computer using an RS-232C serial control cable Computer Side view To RS-232C terminal To RS-232C terminal RS-232C serial control cable (cross type, commercially available) Note • When you establish the connection shown above, set “LAN/RS232C” in “Ex. Setting” of the “PRJ- ADJ” menu to “RS232C”. • The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. • Refer to “SETUP MANUAL” contained on the supplied CD-ROM for the RS-232C specifications and commands. Info • Do not connect the RS-232C cable to a terminal other than the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This may damage your computer. 24
When connecting to the LAN terminal using a LAN cable TX/RX LED (yellow) Illuminates when transmitting/receiving data. LINK LED (green) Illuminates when linked. * To ensure safety, do not connect the LAN terminal with any cables that may cause excessive voltage such as a telephone line. Hub or Computer To LAN terminal LAN cable (Category 5 type, commercially available) Note • When you establish the connection shown above, set “LAN/RS232C” in “Ex. Setting” of the “PRJ- ADJ” menu to “LAN”. • When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially available). • When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially available). Connections 25
Page 1 and 2: DATA PROJECTOR MODEL XG-PH80W-N XG-
Page 3 and 4: SPECIAL NOTE FOR USERS IN THE U.K.
Page 5 and 6: Before using the projector, please
Page 7 and 8: How to Read this Operation Manual
Page 9 and 10: Adjusting the Projector Function (
Page 11 and 12: 15. Overloading Do not overload wal
Page 13 and 14: Caution regarding usage of the proj
Page 15 and 16: Accessories Supplied accessories In
Page 17 and 18: Part Names and Functions Numbers in
Page 19 and 20: Numbers in Z refer to the main page
Page 21 and 22: Easy Start This section shows the b
Page 23 and 24: Setting Up the Projector Video Setu
Page 25 and 26: Connecting the Projector to Other E
Page 27: Equipment Video equipment, Camera,
Page 31 and 32: 5 Insert the replacement lens with
Page 33 and 34: Image Projection Shifting the Lens
Page 35 and 36: Adjusting the Focus Press FOCUS +/-
Page 37 and 38: INPUT button (ENTER) button P/R but
Page 39 and 40: Basic Operation RESIZE Output scree
Page 41 and 42: Using the Remote Control to Operate
Page 43 and 44: Useful Features “Signal adjustmen
Page 45 and 46: Using the Menu Screen Adjustment bu
Page 47 and 48: Picture Adjustment (“Picture” M
Page 49 and 50: Menu operation n Page 41 7 Adjustin
Page 51 and 52: Video Adjustment (“Video” Menu)
Page 53 and 54: Adjusting the Projected Image (“S
Page 55 and 56: Menu operation n Page 41 9 Security
Page 57 and 58: Menu operation n Page 41 5 Setting
Page 59 and 60: Useful Features Returning to the De
Page 61 and 62: Useful Features WARNING ■ The fol
Page 63 and 64: Using 3D Viewing Mode Use the follo
Page 65 and 66: Maintenance Cleaning the projector
Page 67 and 68: 2 Remove the filter covers. • Rem
Page 69 and 70: TEMP. (temperature warning)/ STATUS
Page 71 and 72: Removing and Installing the Lamp Un
Page 73 and 74: Replacing the Color Wheel The proje
Page 75 and 76: Compatibility Chart Computer • Mu
Page 77 and 78: Troubleshooting Problem Check Page
Page 79 and 80:
Problem Check Page 3D images fl ick
Page 81 and 82:
Specifications Model XG-PH80W-N XG-
Page 83:
Index 4:3·············
show all

XG-PH80W-N/X-N Operation-Manual GB

Create successful ePaper yourself

Delete template?

Save as template?