Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connecting the Projector to Other Equipment<br />
Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet<br />
and turn off the equipment to be connected. After making all connections, turn on the projector<br />
and then the other pieces of equipment. When connecting a computer, ensure that it is the last<br />
equipment to be turned on after all the connections are made.<br />
IMPORTANT: Ensure that the appropriate<br />
input mode has been selected on the<br />
projector before you turn on the connected<br />
equipment.<br />
• For more details of connection and cables, refer<br />
to the operation manual of the connected<br />
equipment.<br />
• You may need other cables or connectors not<br />
listed below.<br />
Terminals on the Projector<br />
Equipment<br />
Computer<br />
Terminal on<br />
connected equipment<br />
R<strong>GB</strong> output terminal<br />
Computer audio<br />
output terminal<br />
R<strong>GB</strong> output terminal<br />
R<strong>GB</strong> cable (supplied)<br />
Cable<br />
Computer audio cable (ø3.5 mm stereo<br />
minijack, commercially available)<br />
Mini D-sub 15 pin/5 BNC cable (commercially available)<br />
Terminal on the<br />
projector<br />
COMPUTER/<br />
COMPONENT1<br />
COMPUTER/<br />
COMPONENT2<br />
Connections<br />
Computer audio<br />
output terminal<br />
Computer audio cable (ø3.5 mm stereo<br />
minijack, commercially available)<br />
DVI digital output<br />
terminal<br />
DVI Digital cable (commercially available)<br />
DVI-D<br />
Computer audio<br />
output terminal<br />
Computer audio cable (ø3.5 mm stereo<br />
minijack, commercially available)<br />
Note<br />
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm<br />
stereo audio cable.<br />
• When connecting the projector to a compatible computer other than a PC (VGA/SVGA/<strong>XG</strong>A/S<strong>XG</strong>A/U<strong>XG</strong>A) or<br />
Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.<br />
• See page 71 “Compatibility Chart” for a list of computer signals compatible with the projector. Use with<br />
computer signals other than those listed may cause some of the functions to not work.<br />
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Macintosh Dealer.<br />
• Depending on the computer you are using, an image may not be projected unless the<br />
computer’s external output port is switched on (e.g. Press “Fn” and “F5” keys<br />
simultaneously when using a SHARP notebook computer). Refer to the specifi c instructions in<br />
your computer’s operation manual to enable your computer’s external output port.<br />
21
Change language