You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Easy Start (Continued)<br />
5. Adjust the angle<br />
Adjust the projector angle:<br />
• Shift the lens horizontally and vertically.<br />
- Press H&V LENS SHIFT (P/R/O/Q) on the projector.<br />
- Press LENS SHIFT and then press P, R, O or Q on the remote<br />
control.<br />
• Adjust the projector angle by rotating the adjustment feet.<br />
P. 30<br />
6. Adjust the focus and the zoom<br />
1 Press FOCUS +/– on the projector or on the remote control to adjust the focus.<br />
2 Press ZOOM +/– on the projector or on the remote control to adjust the zoom.<br />
P. 31<br />
7. Correcting the image distortion due to the projection angle<br />
1 Press MENU to display the menu screen.<br />
2 Press O or Q to select “SCR-ADJ”.<br />
3 Press P or R to select “Keystone”.<br />
4 Press O or Q to adjust the Keystone Correction.<br />
P. 32<br />
8. Select the Input mode<br />
Press INPUT to display the INPUT list. Use P/R to select the Input mode.<br />
INPUT list<br />
INPUT<br />
DVI-D<br />
COMPUTER1<br />
COMPUTER2<br />
COMPONENT<br />
9. Turn the computer on<br />
10. Turn the power off<br />
On the projector<br />
On the remote control<br />
P. 33<br />
Press STANDBY/ON on the projector or on the remote control, and then press the button<br />
again while the confi rmation message is displayed to put the projector into Standby mode.<br />
On the projector On the remote control On-screen display<br />
Enter STANDBY Mode?<br />
Yes : Press Again<br />
No : Please Wait<br />
18<br />
• You can unplug the power cord or switch the MAIN POWER switch to “OFF” even if the<br />
projector is operating.<br />
• Even if you unplug the power cord or switch the MAIN POWER switch to “OFF”, the cooling<br />
fan continues to run for a while.<br />
P. 28
Change language