1929 Hudson Super-Six Parts List - Hudson-Essex-Terraplane Club

HUDSON
SUPER - SIX
PARTS LIST
January
1929
HUDSON MOTOR CAR COMPANY
DETROIT, MICHIGAN
Printed in U. S. A.

HUDSON
PARTS LIST
__________
January 1929
_________
IMPORTANT
The use of genuine Hudson-Essex parts will insure
the satisfactory operation of your car.
There are Hudson-Essex distributors and dealers in
all principal cities and towns equipped to serve you.
For your own protection, insist upon obtaining
genuine Hudson-Essex parts.
HUDSON MOTOR CAR COMPANY
DETROIT, MICHIGAN

WARRANTY
The factory obligation with respect to replacement of alleged
defective parts is fully covered by our warranty as follows:
"We warrant the automobiles manufactured by us to be free from
defects in material under normal use and service, our obligation under
this warranty being limited to making good any parts or part thereof
which shall, within ninety (90) days after delivery of such automobile
to the original purchaser, be returned to us with transportation charges
prepaid, and which our examination shall disclose to our satisfaction
to have been thus defective.
"This warranty is expressly in lieu of all other warranties expressed
or implied, and of all other obligations or liabilities on our part, and
we neither assume nor authorize any other person to assume for us any
other liability in connection with the sale of our automobiles.
"This warranty shall not apply to any Hudson automobile which
shall have been repaired or altered outside of our factory in any way
so as, in our judgment, to affect its stability or reliability, or which has
been subject to misuse, negligence or accident.
"We make no warranty whatsoever in respect to tires, rims, ignition
apparatus, tops, upholstery, horns or other signaling devices, batteries,
speedometers, or other trade accessories."
HUDSON MOTOR CAR COMPANY
Detroit, Michigan
The factory does not participate in any labor costs incident to the replacement of parts under the warranty. The
warranty under which Hudson or Essex motor cars are sold will be interpreted by the Distributor or Dealer
from whom the car was purchased. If you are touring and require service, be sure to get in touch with your
nearest authorized Hudson or Essex Distributor or Dealer.

INSTRUCTIONS FOR ORDERING PARTS
1—Order parts through the nearest Distributor or Dealer.
2—Always give PART NUMBER and NAME of each part ordered.
3—Mail and Parcel Post orders should be accompanied by an amount sufficient to cover
POSTAGE.
4—Specify how shipments are to be made.
5—Orders for parts should be written separately from correspondence pertaining to other
Sultex—Ship to me (us) by express.
Sulkline—Ship by express to
Sulkate-Ship to me (us) by freight.
Sulmost-Sup to me (us) parcel post.
Sulteen—When and how will you ship parts
called for in my (our) letter of
Sulwire—When and how did you ship parts
called for in my (our)telegram of
Sultwich—When and how will you ship parts
called for in my (our) telegram of

INDEX
Accelerator
Accessories
Axle—Front
Axle—Rear
Battery Suspension
Bonnet
Brakes—Front
Brakes—Rear
Bumpers
Carburetor
Clutch
Controls—
Brake Control
Carburetor Mixture Control
Hand Control Lever (Gear Shift)
Hand Control Lever (Brake)
Heat Control
Pedal Control (Clutch and Brake)
Spark and Throttle Control
Shutter Control
Drag Link
Electrolock
Fan
Fenders
Frame
Gasoline Tank
Horn
Instrument Board Instruments
Ammeter
Cowl Ventilator
Instrument Lamp
Oil Pressure Gauge
Speedometer
Lamps
Mats
Motor
Adjusting Eccentric and Water Pump Group
Camshaft
Camshaft Bearings
Connecting Rod
Crankcase
Crankshaft
Crankshaft Bearings
Cylinder
Cylinder Head
Distributor Drive Shaft Group
Exhaust Manifold
Flywheel
Generator Coupling
Intake Manifold
Oil Pump
Oil Reservoir
Piston
Rocker Arm
Tappets
Timing Sprockets and Chain
Valves
Vibration Dampener
Muffler and Exhaust Pipe
Radiator
Rim
Rumble Seat Steps
Running Board
Splash Guard
Shield—Rear—Over Gas Tank
Springs—Front
Springs—Rear
Shock Absorbers
Steering Gear
Tire Carrier
Tools
Transmission
Trunk Rack
Universal Joints and Propeller Shaft
Vacuum Tank Connections and Gasoline Pipes
Wheels
Wiring
R. H. Drive Parts
Page No.
33
42
5
7
14
40
5
9
33
25
34
33
29
29
33
29
33
15
38
44
15
38
13
15
44
42
42
42
42
42
42
41
48
17
22
20
21
22
17
20
20
17
17
23
21
20
22
21
23
19
22
21
21
20
21
20
25
15
10
46
38
38
40
11
11
44
36
40
44
25
46
36
29
9
43
47

HUDSON SUPER-SIX PARTS LIST 5
FRONT AXLE
Illus.
No.
Part
No.
Description
Specifications
No.
Req.
. . .
1234567
. . .
.. . .
9
10
11
12
13
14
•
15
16
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
. . .
32
. . .
. . .
. . .
. . .
. . .
33
34
35
36
CX 31093
CX 31475
BX 31096
BX 31097
BX 21005
BX 27438
BX 31245
BX 31246
BX 3435
BZ 124
BX 29588
BX 14897
BX 22232
BX 29587
BX 70101
BM 18243
BX 70439
BX 18341
BM 110
BX 28966
BX 28967
BX 70110
BX 31234
BX 13205
BX 31099
BX 31235
12347
12346
6237
5672
BX 28961
BX 31207
BX 9720
BX 21948
BX 31206
BM 12172
CX 31395
CX 31396
BX 29310
BX 70144
BX 70145
BX 29311
BX 29314
BX 29313
BX 29312
BZ 70310
BZ 3987
FRONT AXLE ASSEMBLY
Front axle center assembly
SPINDLE—R. H
SPINDLE—L. H
Spindle nut
Spindle nut washer
FRONT BRAKE DUST SHIELD ASSEMBLY—R. H
FRONT BRAKE DUST SHIELD ASSEMBLY—L. H
Spindle to backing plate bolt
Spindle to backing plate bolt nut
Spindle grease deflector
Spindle dust washer
Spindle dust washer retainer—outer
Spindle dust washer retainer—inner
Spindle oil plug
Spindle oil plug gasket
Welch plug—over pivot pin
Spindle set screw
Spindle set screw nut
Spindle shim—thick
Spindle shim—thin
Spindle pivot bearing
Spindle pivot pin
Spindle pivot pin lock
Spindle pivot pin bushing—lower
Spindle pivot pin bushing—upper
Inner bearing cone and rolls
Inner bearing cup
Outer bearing cone and rolls
Outer bearing cup
Steering arm—R. H
Steering arm—L. H
Steering arm key
Steering arm ball
Steering arm to drag link ball
Steering arm ball nut
TIE ROD ASSEMBLY
Tie rod only
Ball seat
Shim
Shim
Plug
Spring
Inner cover
Outer cover
Outer cover screw
Outer cover screw nut
3/8"-16 special
3/8"-16x1/2" square head
3/8"-16x3/8"
Nice—special
Timken 415
Timken 412A
Timken 315
Timken 312
1/32" thick
1/16" thick
3/16"-24x7/8"'
3/16"-24
1
1
1
1
2
2
1
1
12
12
2222222
. . 2
22222222222211221311446222222
FRONT BRAKES
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
BX 31598
BX 31644
BX 31610
BX 63989
BX 31592
BX 31593
BX 70361
BR 611
BX 31611
BX 31621
BX 31646
BZ 12290
BX 70539
BX 31624
BX 30871
BX 31245
BX 31246
BX 31643
BX 31613
BX 31614
BX 31622
BZ 62
BX 31623
BRAKE SHOE ASSEMBLY (Set for one wheel)
Brake shoe retracting spring
Camshaft and crank assembly
Camshaft dust shield
Brake crank lever—R. H
Brake crank lever—L. H
Brake crank lever clamp bolt
Brake crank lever clamp bolt nut
Cam plate and blocks assembly
Reinforcement plate and anchor pin assembly
Anchor pin washer
Anchor pin nut
Anchor pin shakeproof lockwasher
Carrier bracket assembly
Carrier bracket bushing
Backing plate assembly—R. H
Backing plate assembly—L. H.
Brake shoe silencing spring
Brake shoe spacer pin and eccentric washer
Brake shoe spacer pin and eccentric spring
Eccentric assembly
Eccentric nut
Adjusting screw assembly
2
2
2
4
1
1
2
2
2
2
4
4
4
2
2
1
1
2
4
4
2
2
2
When ordering give letter prefix with symbol numbers - Example: CX 28960

6
Rear Ax;e Assembly

HUDSON SUPER-SIX PARTS LIST 7
FRONT BRAKES (Continued)
Illus.
No.
58
59
60
61
62
63
64
...
65
66
67
68
Part
No. Description Specifications
BX 131642
BX 131641
BX 163974
BX 131645
BX 131188
BX 131189
BX 131190
BX 170443
BX 161492
BX 162739
BX 162740
BX 162741
Adjusting screw pivot nut—R. H.
Adjusting screw pivot nut—L. H.
Adjusting screw cover plate
Adjusting screw lock spring—flat
Brake operating lever—R. H.
Brake operating lever—L. H.
Brake operating lever pivot pin
Brake operating lever pivot pin washer
Brake operating lever pivot pin dust washer
Brake operating lever take-up spring
Brake operating lever dust shield
Brake operating lever dust washer—felt
No.
Req.
2
2
2
2
1
1
2
2
2
2
2
2
REAR AXLE
...
...
1
2
2
3
3
4
5
6
7
8
9
10
...
...
-
...
11
...
...
12
13
14
.
.
15
16
17
18
19
20
21
22
23
24
25
26
27
28
.
29
...
30
31
32
33
34
35
36
37
38
39
40
41
CY 31051
CY 31052
CY 31053
GY 31054
GY 31055
GY 31604
GY 31605
GY 20709
BY 20094
BY 20710
BY 19321
BY 19322
BM 322
BZ 1157
GY 7311
GY 9683
GY 545
CY 30834
CY 30835
CY 19567
19328
9626
GY 12193
BY 12184
GM 5710
BY 19322
BR 1308
6232
18037
BY 9641
BY 9605
GY 9598
BY 30875
BY 20998
BY 20855
BY 9765
BY 9766
BY 9767
BY 30837
BY 30836
BY 30839
BY 10971
BY 30838
BY 18305
BY 18164
BY 30842
BY 30863
18036
2442
9698
12412
BY 19144
BY 19145
BY 19141
BY 19142
REAR AXLE ASSEMBLY
REAR AXLE ASSEMBLY
REAR AXLE HOUSING ASSEMBLY
Brake spider—R. H.
Brake spider—L. H.
Dust shield—R. H.
Dust shield—L. H.
Inner oil retainer
Inner oil retainer felt washer
Inner oil retainer felt washer spacing ring
Housing cover
Housing cover gasket
Housing cover pipe plug
Housing cover bolt
Rivet
Rivet
Rivet
DIFFERENTIAL CARRIER AND GEAR SET
ASSEMBLY
DIFFERENTIAL CARRIER AND GEAR SET
ASSEMBLY
DIFFERENTIAL CARRIER ASSEMBLY (Includes
parts 19328, 9626, 9641, 9605 and 9598)
Carrier (Not sold separately)
Carrier cap (Not sold separately)
Elbow
Filler pipe plug
Inspection pipe plug
Carrier gasket
Carrier bolt
Bearing cup
Bearing cone and rolls
Bearing cap bolt
Bearing adjusting nut
Bearing adjusting nut lock
DIFFERENTIAL CASE ASSEMBLY
Differential case bolt
Differential case bolt lock
Differential gear
Differential pinion
Differential spider
Drive pinion.
Drive gear
Drive pinion
Drive pinion shaft nut
Drive gear (Gears and pinions should be ordered in
matched sets to insure satisfactory performance)
Drive gear bolt
Drive gear bolt nut
Drive gear bolt nut lock
PINION BEARING CAGE ASSEMBLY
Front bearing cone and rolls
Front bearing cup
Rear bearing cone and rolls
Rear bearing cup
Felt washer
Felt washer retainer
Adjusting sleeve
Adjusting sleeve lock nut
4-5/12 to 1
4-1/13 to 1
3/4"
3/8"-16x3/4"
Wagon box head 3/8"x1-1/8"
Wagon box head 3/8"x1"
Button head 5/16"x1"
4-5/12 to 1
4-1/13 to 1
3/8"-16x1-1/8"
Timken No. 3720
Timken No. 377
9/16"-12x3-1/4"
3/8"-16x1-1/2"
11 teeth
53 teeth 4-5/12 to 1
13 teeth
1"-20x1-1/2"
53 teeth 44,13 to 1
3/8"-24x1-7 /16"
special
3/8"-24x21/64"
Timken No. 3196
Timken No. 3120
Timken No. 439T
Timken No. 432
1
1
1
1
1
1
1
2
10
6111
10
12
4
20
1
1
1
1
2
1
1
1
1
10
22422184241111I
1
10
10
51111II211
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 9
REAR AXLE (Continued)
Illus.
No.
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
...
Part
No. Description Specifications
BY 30843
BY 19143
BY 19330
BY 18031
BY 3433
BZ 9906
BY 9699
CY 21003
BY 11470
BY 9670
BY 9681
BY 9628
BY 13959
BY 19326
12496
12497
BY 16573
BY 20094
BY 9668
BY 13954
BZ 72
BY 31056
BY 31218
GM 9202
Adjusting sleeve lock nut lock
Dust excluder
Bearing cage lock
Bearing cage clamp bolt
1/2"-20X3-1/2"
Clamp bolt nut
Companion flange
Companion flange key
DRIVE SHAFT ASSEMBLY (Includes thrust button)
Drive shaft thrust button
Drive shaft washer
Drive shaft nut
7/8"-14x5/8"
Drive shaft key
Drive shaft felt washer
Drive shaft felt washer retainer
Bearing cone and rolls
Timken 458T
Bearing cup Timken 454
REAR WHEEL BEARING ADJUSTING NUT ASSEMBLY
(Includes bearing cup and felt washer)
Felt washer
Adjusting nut clamp bolt
Adjusting nut lock
Adjusting nut clamp bolt nut 1/2"-20
Rear wheel bearing grease deflector
Rear wheel bearing grease deflector gasket
Machine screw
REAR BRAKES
1/2"-20x3-1/4"
1/4"-20x9/16"
No.
Req.
1
1
1
1
1
1
1
2
2
2
2
2
6
4
2
2
2
2
2
2
2
2
2
8
65
66
67
68
...
69
70
71
72
73
74
75
76
...
...
77
78
79
80
81
82
83
84
85
86
87
88
BX 31598
BX 31644
BX 31610
BX 63989
BY 31191
BY 31192
BX 70361
BR 611
BX 31611
BX 31621
BX 31646
BX 31624
BX 30871
BY 31604
BY 31605
BX 31643
BX 31613
BX 31614
BX 31622
BZ 62
BX 31623
BX 31642
BX 31641
BX 63974
BX 31645
BZ 12290
BX 70539
BRAKE SHOE ASSEMBLY (Set for one wheel)
Brake shoe retracting spring
Camshaft and crank assembly
Camshaft dust shield
Brake crank lever—R. H.
Brake crank lever—L. H.
Brake crank lever clamp bolt
Brake crank lever clamp bolt nut
Cam plate and blocks assembly
Reinforcement plate and anchor pin assembly
Anchor pin washer
Carrier bracket assembly
Carrier bracket bushing
Backing plate assembly—R. H.
Backing plate assembly—L. H.
Brake shoe silencing spring
Brake shoe spacer pin and eccentric washer
Brake shoe spacer pin and eccentric spring
Eccentric assembly
Eccentric nut
Adjusting screw assembly
Adjusting screw pivot nut—R. H.
Adjusting screw pivot nut—L. H.
Adjusting screw cover plate
Adjusting screw lock spring—flat
Anchor pin nut
Anchor pin shakeproof lockwasher
2
2
2
4
1
I
2
2
2
2
4
2
2
1
1
2
4
4
2
2
2
2
2
2
2
4
4
WOOD WHEELS - STANDARD
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
CW 31073
BZ 31114
BZ 70421
BZ 70147
BX 14987
BX 22232
BX 29587
5672
12346
BZ 31082
CW 31104
BZ 62792
BZ 7819
CW 31074
CW 31102
FRONT WOOD WHEEL ASSEMBLY (Specify color) 31"x6"
Hub assembly (Includes bearing cups)
Hub bolts
3/8"-16x2-5/16"
Hub bolt—nut
3/8"-16x9/32"
Felt dust washer
Felt dust washer retainer—outer
Felt dust washer retainer—inner
Outer bearing cup Timken 312
Inner bearing cup
Timken 412A
Hub cap
Brake drum
Brake inspection hole cover
Screw
1/4"-20x3/8" round head
REAR WOOD WHEEL ASSEMBLY (Specify color) 31"x6"
Brake drum
2
2
24
24
22222222222
When ordering give letter prefix with symbol numbers - Example: CX 28960

10 HUDSON SUPER-SIX PARTS LIST
WOOD WHEELS—STANDARD (Continued)
Illus.
No.
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
CW 31314
CW 31104
BZ 31081
BZ 70421
BZ 70147
BZ 31082
BZ 31113
BZ 62792
BZ 7819
CW 31377
CW 31346
CZ 31333
BZ 31341
5672
12346
BZ 31348
BZ 31349
BZ 31334
BZ 31342
BZ 31385
CW 31344
BZ 70250
BZ 62792
BZ 70521
BZ 31388
BZ 31251
BZ 31343
BZ 31382
BZ 31383
BZ 31384
REAR WOOD WHEEL ASSEMBLY (temporary)
(Specify color)
Brake drums (temporary)
Hub
Hub bolt
Hub bolt nut
Hub cap
Grease shield
Brake inspection hole cover
Screw
WOOD WHEELS-DEMOUNTABLE-AT HUB
31"x6"
3/8"-16x2-5/16"
3/8"-16x9/32"
1/4"-20x3/8" round head
WHEEL ASSEMBLY
Locking ring
Chromium plated
Front hub assembly (Includes bearing cups and
brake drums)
Front hub (Includes bearing cups)
Outer bearing cup Timken 312
Inner bearing cup
Timken 412A
Rear hub assembly (Includes brake drum)
Rear hub
Rear hub assembly (Includes brake drum)
Rear hub
Hub bolt
Chromium plated
Brake drum
Rivet
5/16"x1-1 /16" button hd.
Brake inspection hole cover
Screw
1/4"-20x17/64" round hd.
Hub cap—inner (front wheel)
Hub cap
Shield—front brake oil
Bolting flange—outer
Bolting flange—inner
Steel ferrule
No.
Req.
2
2
2
24
24
2222
5-6
5-6
2
2
2
2
2
2
2
2
28
4
28
442
5-6
222
35-42
WIRE WHEELS
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
CW 31330
CW 31346
BZ 31333
BZ 31341
5672
12346
CZ 31348
BZ 31349
CZ 31333
BZ 31342
BZ 31347
CW 31344
BZ 31343
BZ 70520
BZ 62792
BZ 70521
BZ 31338
BZ 31339
BZ 31340
BZ 31388
BZ 31251
WIRE WHEEL ASSEMBLY
Specify color
Locking ring
Chromium plated
Front hub assembly (Includes bearing cups and
brake drums)
Front hub ( Includes bearing cups)
Outer bearing cup Timken 312
Inner bearing cup
Timken 412A
Rear hub assembly (includes brake drums)
Rear hub
Rear hub assembly (Includes brake drums)
Rear hub
Hub bolt
Special
Brake drum
Front brake grease shield
Rivet
5/16"X1-1/16" button hd.
Brake inspection hole cover
Screw
1/4-0X17/64" round hd.
Outer spoke
Inner spoke
Spoke nipple
Hub cap—inner (front wheel)
Hub cap
5-6
5-6
2
2
2
2
2
2
2
2
28
42
28
44
140-168
210-252
350-420
2
5-6
DEMOUNTABLE RIMS
...
...
...
...
...
...
...
...
CW 30862
BZ 28417
BZ 62590
BZ 62045
BZ 62044
BZ 30783
BZ 30784
BZ 30785
Rim
Rim lock
Rim lock stud
Rim safety latch
Rim safety latch stud
Rim clamp
Rim clamp bolt
Rim clamp bolt nut
31"x6"
5
5
5
5
5
20
20
20
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 11
FRONT SPRINGS
Illus.
No.
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
CZ 31387
CZ 30945
CZ 30936
CZ 30937
CZ 30938
CZ 30939
CZ 30940
CZ 30941
CZ 30942
CZ 30943
BZ 30968
BZ 30967
BZ 30970
BM 110
BZ 13224
BZ 13336
BZ 22272
BZ 16352
BZ 29318
BZ 16342
BZ 24466
BZ 24452
BZ 24464
BY 18093
BZ 30912
BZ 88
BZ 29297
BZ 29296
FRONT SPRING ASSEMBLY
Leaf No. 1 (Includes bushings)
Leaf No. 2
Leaf No. 3 (Includes clips)
Leaf No. 4
Leaf No. 5
Leaf No. 6
Leaf No. 7
Leaf No. 8
Leaf No. 9
Leaf clip—small
Leaf clip—large
Center bolts
Nut—center bolt
Bushing—front end
Bushing—rear end
Bolt—front end
Nut—front end bolt
Shim—front end bolt
Shim—front end bolt
Shackle—plain
Shackle—tapped
Shackle bolt—thin head
Nut—shackle bolt
Clip
Nut—clip
Bumper
Bumper strap
39" center to center—
1-7/8" thick
17-1/2" frt. to ctr.;
20-1/2" ctr. to rear
15-1/2" frt. to ctr.; 18-1/8"
ctr. to rear
13-1/2" frt. to ctr.; 15-3/4"
ctr. to rear
11-1/2 frt. to ctr.; 13-3/8"
ctr. to rear
9-1/2" frt. to ctr.; 11" ctr.
to rear
7-1/2" frt. to ctr.; 83/4" ctr.
to rear
5-1/2" " frt. to ctr.; 6-1/2" ctr.
to rear
3-3/4" frt. to ctr.; 4-1/4" ctr.
to rear
3/8"-16x2-3/8"
3/8"-16x3/8"
Plain
Drilled
9/16"-18x11/16"
Rubber
Leather
No.
Req.
2
2
2
2
2
2
2
2
2
2
4
4
2
2
2
2
2
2
2
2
2
2
4
4
4
8
2
4
REAR SPRINGS
TOWN AND LANDAU SEDANS
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
CZ 31471
CZ 30953
CZ 30954
CZ 30955
CZ 30956
CZ 30957
CZ 30958
CZ 30959
CZ 30960
CZ 30961
CZ 30962
BZ 30964
BZ 30963
BZ 30969
BM 110
BZ 29005
BZ 25291
BZ 88
BZ 5523
BZ 29004
BZ 13341
BZ 13224
BZ 16340
BZ 16352
BZ 24072
REAR SPRING ASSEMBLY-10 leaves
Leaf No. 1 (Includes bushings)
Leaf No. 2
Leaf No. 3 (Includes clips)
Leaf No. 4
Leaf No. 5
Leaf No. 6
Leaf No. 7
Leaf No. 8
Leaf No. 9
Leaf No. 10
Spring leaf clip—small
Spring leaf clip—large
Center bolts
Nut—center bolt
Plate
Clip—rear spring
Nut—spring clip
Nut—spring clip lock
Strap—spring clip
Bushing—front
Bushing—rear
Bolt—front end
Nut—front end bolt
Shim—front end bolts
57-11/16" ctr. to ctr.
28-1/2" frt. to ctr.; 28-1/2"
to rear
25-1/2' frt. to ctr.; 25-1/2"
to rear
22-5/8" frt. to ctr.; 22-5/8"
to rear
19-3/4" frt. to ctr.; 193/4"
to rear
16-7/87/8 frt. to ctr.; 16%"
to rear
14" frt. to ctr.; 14" to rear
11-1/8' frt. to ctr.; 11-1/8"
to rear
8-1/4" frt. to ctr.; 8-1/4" to
rear
5-3/8" frt. to ctr.; 5-3/8" to
rear
3/8"-16 USSx3"
3/8"-16x3/8"
9/16"-18x11/16"
9/16"-18x1/4"
9/16"-18
2
2
2
2
2
2
2
2
2
2
2
4
4
2
2
2
4
24
8422224
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 13
REAR SPRINGS—TOWN AND LANDAU SEDANS (Continued)
Illus.
No.
...
...
...
...
...
Part
No. Description Specifications
BZ 16343
BZ 24465
BY 18093
BZ 24453
BZ 24454
CZ 31386
Sleeve—front end bolt adjusting
Bolt—shackle
Nut—shackle bolt
Shackle—plain
Shackle—threaded
5/8”-18
USED ON COACH, SEDAN, VICTORIA AND PHAETON
REAR SPRING ASSEMBLY
NOTE: Use component parts of spring CZ 31471
No.
Req.
2
4
4
2
2
2
Coupe and Roadster
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
CZ 31470
CZ 30953
CZ 30944
CZ 30946
CZ 30947
CZ 30948
CZ 30949
CZ 30950
CZ 30951
CZ 30952
BZ 30965
BZ 30966
BZ 30971
BM 110
BZ 29005
BZ 25291
BZ 88
BZ 5523
BZ 29004
BZ 13341
BZ 13224
BZ 16340
BZ 16352
BZ 24072
BZ 16343
BZ 24465
BY 18093
BZ 24453
BZ 24454
REAR SPRING ASSEMBLY-9 leaves
Leaf No. 1 (Includes bushings)
Leaf No. 2
Leaf No. 3 (Includes clips)
Leaf No. 4
Leaf No. 5
Leaf No. 6
Leaf No. 7
Leaf No. 8
Leaf No. 9
Leaf clip—small
Leaf clip—large
Center bolt
Nut—center bolt
Plate
Clip—rear spring
Nut—spring leaf
Nut—spring clip lock
Strap—spring clip
Bushing—front
Bushing—rear
Bolt—front end
Nut—front end bolt
Shim—front end bolt
Sleeve—front end bolt adjusting
Bolt—shackle
Nut—shackle bolt
Shackle—plain
Shackle—threaded
57-11/16" ctr. to ctr.
28-1/2" frt. to ctr. 28-1/2
to rear
25-1/2" frt. to ctr.; 25-1/2"
to rear
22" frt. to ctr.; 22" to rear
18-3/4" frt. to ctr.; 18-3/4"
to rear
15-1/2" frt. to .; 15-1/2"
to rear
12-1/4" frt. to ctr.; 12 34'
to rear
9" frt. to crr.; 9" to rear
6-1/2." frt. to ctr..; 4-3/4"
to
rear
3/8"-18x2-11/16"
3/8"-18x3/8"
9 /16"-18x11 /16"
9/16"-18x1/4"
9/16"-18
5/8"-18
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
24
84222
2
4
2
4
4
2
2
FRAME
...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
CZ 31000
CZ 31023
CZ 31024
BZ 31153
BZ 31154
GZ 80
BZ 12332
BZ 70287
BZ 70311
BZ 29850
BZ 29851
BZ 70102
BZ 70103
BZ 30265
BZ 18119
BM 110
BZ 28974
BZ 28975
BZ 28813
BZ 30103
BZ 28834
BZ 30104
BZ 31227
GY 84
BY 85
FRAME ASSEMBLY
FRAME SIDE MEMBER ASSEMBLY—R. H
FRAME SIDE MEMBER ASSEMBLY—L. H
Front end—R. H. (spring hanger)
Front end—L. H. (spring hanger)
Rivet
Rivet
Rivet
Rivet
REAR END ASSEMBLY (spring hanger)—R. H.
REAR END ASSEMBLY (spring hanger)—L. H.
Rivet
Rivet
Bracket—starting crank
Bolt
Nut
Front motor support—R. H.
Front motor support—L. H.
Rear motor support
Body bracket—short
Body bracket No. 2 and 7
Body bracket No. 3, 4, 5 and 6
Bracket—trunk rack support loop
Rivet
Rivet
3/8"x1-1/2" button head
34"x3" button head
3/8"x3-3/8" button head
3/8"x3-1/8" button head,
3/8"x3-3/4" button head
%"x4-3/8" button head
3/8"-16x3-5/16"
3/8"-16x3/8"
,
1/4"'x3/4" button head
3/8"x1" button head
1
1
1
1
1
4
2
2
2
1
1
2
2
1
2
2
1
1
1
2
4
8
2
4
4
When ordering give letter prefix with symbol numbers - Example: CX 28960

14 HUDSON SUPER-SIX PARTS LIST
FRAME (Contiued)
Illus.
No.
25
...
...
28
29
30
31
32
33
34
35
...
38
39
...
...
...
...
...
Part
No. Description Specifications
BY 77
BZ 28840
BZ 28818
BZ 28819
BZ 28820
BZ 28838
BZ 30105
BZ 30266
BZ 30270
BZ 30611
BZ 31158
BY 3205
BZ 29548
BZ 30030
BM 18185
BM 110
BY 60989
GM 1483
BZ 122
No.
Req.
Rivet 3/8"x1-1/4" button head 2
FRONT SPRING REAR HANGER ASSEMBLY (Includes
bushing) 2
Bushing
Rear spring front hanger—R. H
2
1
Rear spring front hanger—L. H
Muffler front hanger
1
1
Muffler rear hanger 1
RUNNING BOARD HANGER ASSEMBLY—front and
center 4
Running board hanger—rear
Front fender tire support (wire wheels only)
2
2
Idler lever support
Clevis pin 7/16"x2-3/8"
2
2
Tire carrier bracket—center 1
BATTERY TRAY ASSEMBLY 1
Battery tray bolt 3/8"-16x2" 1
Battery tray bolt nut
Rear rubber bumper
3/8"-16x3/8" 1
2
Bumper bolt
Bumper bolt nut
5/16"-18x1-3/8"
5/16"-18x5/16"
4
4
40
41
42
43
...
44
...
45
46
47
...
...
...
...
...
...
...
...
...
BZ 30260
BZ 30284
BZ 30264
BZ 30342
BZ 30343
BZ 70286
CZ 31223
CZ 31110
CZ 31224
CZ 28808
CZ 31476
GZ 3613
BO 18712
BZ 6437
BZ 28823
BZ 28824
BZ 28825
BZ 28826
BZ 28827
BZ 28828
CROSS MEMBERS
Front cross tube—small 1
Plug—small cross tube 2
Front cross tube—large 1
Bracket—R. H. end
Bracket—L. H. end
1
1
Plug—large front cross tube
Front center cross member assembly—upper
2
1
Front center cross member—lower 1
Rear center cross member assembly 1
Rear box cross member 1
Rear cross member assembly (Includes spring hangers)
Rubber ferrule 7/8”
1
2
Rubber ferrule
Rubber ferrule
1/2”
3/8”
4
1
Front center cross member gusset—front right, rear
left
Front center cross member gusset—front left, rear
2
right
Rear center cross member gusset—front right
2
1
Rear center cross member gusset—front left
Rear center cross member gusset—rear right
1
1
Rear center cross member gusset—rear left 1
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
CZ 81686
BZ 5735
BZ 81690
GZ 82493
CZ 82497
CZ 82498
CZ 82494
CZ 82495
BZ 82496
BZ 82499
BZ 82501
CZ 81688
BZ 82519
BZ 82520
CZ 82521
CZ 82522
BZ 82517
CZ 82518
BZ 82496
BZ 82499
BZ 82501
BZ 7304
BZ 70572
BZ 82334
BUMPERS
FRONT BUMPER ASSEMBLY
Bolt—bumper to frame 7/16"-14x1"
1
4
Clamp—bumper to frame 2
Inside bar 1
Inside bar—R. H. (Optional) 1
Inside bar—L. H.
Outside bar—upper
(Optional) 1
1
Outside bar—lower
Bolt—outside and inside bar—end
1
2
Finish plate—center 1
Finish plate—ends 2
Screw—finish plate 3
REAR BUMPER ASSEMBLY
Reinforcement—R. H.
1
1
Reinforcement—L. H.
Inside bar—R. H.
1
1
Inside bar—L. H. 1
Outside bar—upper 1
Outside bar—lower 1
Bolt—outside and inside bar—end
Finish plate—center
1
1
Finish plate—ends 2
Screw—finish plate 3
Bolt—bumper to frame 1/2"-13x2-3/8" 2
Nut—bumper to frame bolt
Spacer—rear bumper
1/2”-13 2
2
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 15
GASOLINE TANK
Illus.
No.
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
CZ 31277
BZ 2346
BZ 31236
BZ 30740
BZ 31274
BZ 30738
BZ 31276
BZ 70434
BZ 12488
BZ 31310
GASOLINE TANK ASSEMBLY
Drain plug—3/8" pipe thread
Filler cap
Filler cap gasket
Suction tube assembly
Filler neck
Gauge—tank unit assembly
Screw—gauge wire No. 8-32x1/4" brass
Screw—gauge attaching No. 8-32x7/16"
Gasket—gauge
No.
Req.
1
1
1
1
1
1
1
1
5
1
GASOLINE TANK STRAP
...
...
...
...
...
...
BZ 28991
BZ 28992
BZ 28997
BZ 28998
BZ 28999
BZ 62
STRAP ASSEMBLY—R. H.
STRAP ASSEMBLY—L. H..
Front "T" bolt
Front "T" bolt nut
Rear bolt
Rear bolt nut
3/8"-24x21/64"
1
1
2
2
2
2
RADIATOR
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
A 31200
A 81260
A 81315
BZ 18218
BM 272
BZ 78758
BZ 81309
BZ 81311
BZ 81261
BZ 81184
BZ 28917
BZ 62
BZ 81183
BZ 82085
BZ 81353
BZ 81264
BZ 81270
RADIATOR COMPLETE
SHELL AND SHUTTERS ASSEMBLY
Shell assembly (less shutters)
Screw—shell to core
Nut—shell to core screw
Shutter blade
Shutter rail assembly
Shutter operating rail assembly
Shutter bell crank
Shutter bell crank bracket
Tie rod—radiator to cowl
Nut
Hinge rod bracket
Lacing
Lacing rivet
Name plate
Starting crank hole cover
Specify color
Specify color
3/8"-24x21/64"
1
1
1
8
8
18
21111112
14
11
CORE
...
...
...
...
...
...
...
...
...
...
...
...
CZ 31108
BZ 31689
BZ 70345
BY 551
BZ 30479
BZ 30559
BZ 31477
BZ 81272
BZ 62353
BZ 30289
BZ 30288
BZ 70327
CORE TANK AND SUPPORT ASSEMBLY
Core anchorage and reinforcement assembly
Screw—core to frame bracket
7/16"-14x1-7/8”
7/16"-14x7/16"
Nut
Outlet
Outlet gasket
Filler neck
Filler cap
Filler cap gasket
Upper hose
Lower hose
Hose clamp 1-13/16"
1
1
2
2
1
1
1
1
1
1
1
4
RADIATOR SHUTTER CONTROL
...
...
...
...
...
...
...
...
BZ 76429
BZ 29111
BZ 81280
BZ 12481
BZ 70492
BZ 81526
BZ 79281
BZ 79272
Knob
Ratchet
Operating rod
Operating rod nut
5/16"-24x17/64"
Operating rod clevis 5/16"-24
Operating rod silencer
Bracket assembly
Bracket spring
1
1
1
1
1
1
1
1
FAN
BM 31309
BT 395
BM 30173
BM 62672
BM 30848
BM 30849
BM 26538
FAN ASSEMBLY
Spider bolt
Hub
Hub gasket
Spindle
Spindle washer Fibre
Spindle shim
5/16"-18x5/8"
5/8"-18 thread
1
4
1
1
1
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 17
FAN (Continued)
Illus.
No.
Part
No. Description Specifications
No.
Req.
...
...
...
...
,..
...
...
BM 18093
BM 30176
BM 306
BM 30177
BM 29725
BM 2337
BM 29898
Spindle nut
5/8"-18x3/8"
Spindle spring
Spindle ball 9/16"
Ball retainer
Supporting arm
Supporting arm screw
1/2"-13x1-5/8"
Belt
MOTOR
... CM 31060 MOTOR ASSEMBLY 1
...
...
...
...
,..
...
...
...
...
...
,..
...
...
...
...
...
,..
...
...
...
...
...
,..
...
...
...
...
...
CM 30050
CM 29941
BM 13194
BM 14112
BM 29906
BM 29902
BM 29883
BM 29916
BM 29915
BY 551
BM 51758
BM 13143
BM 110
BM 18288
BM 9542
BM 30088
BM 13169
BM 2334
BM 29030
BM 29908
BM 18118
BM 30287
GM 20041
GM 20045
BM 25304
BM 25305
BM 13073
BZ 122
CYLINDER
CYLINDER ASSEMBLY AND PISTONS COMPLETE
CYLINDER ASSEMBLY
Welch plug 1-1/4"
Welch plug 1"
Rocker arm push rod guide—lower
Exhaust valve stem guide
Tappet guide
Cylinder head stud—short
Cylinder head stud—long
Cylinder head stud nut
7/16"-14x7/16"
Cylinder head stud extension nut
Exhaust manifold stud
3/8"-16x1-21/32"
Exhaust manifold stud nut
3/8"-16x3/8"
Cylinder side plate stud
3/8"-16x4"
Cylinder side plate stud nut
Cylinder side plate stud nut gasket
Fan lever stud
Fan lever stud gasket
Cylinder water outlet washer
Cylinder to crankcase gasket
Drain cock
Cylinder head indicator plug
FRONT SIDE PLATE AND GASKET ASSEMBLY
REAR SIDE PLATE AND GASKET ASSEMBLY
Front gasket
Rear gasket
Horn bracket stud
5/16"-18x1 I4."
Horn bracket stud nut
5/16"-18x5/16"
1
1
1
1
1
1
1
1
1
8
2
8
6
12
7
16
20
3
12
12
444112111111122
CYLINDER HEAD
22
23
...
24
...
25
26
27
28
...
29
30
31
32
33
34
35
...
...
CM 31065
BM 29863
BM 751
BM 52317
BM 110
BM 29342
BM 29901
BM 356
BM 52317
BM 110
BM 29021
BM 29905
BM 29907
BM 29865
BM 29866
BM 70158
BM 29934
BM 925
BZ 122
CYLINDER HEAD ASSEMBLY (Includes welch plugs,
studs and guides)
Cylinder head gasket
Welch plug 7/8"
Rocker arm bracket stud
3/8"-16x1-15/16"
Rocker arm bracket stud nut 3/8"-16x3/8"
Rocker arm bracket stud nut lock plate
WATER OUTLET MANIFOLD ASSEMBLY
Water outlet manifold gasket
Water outlet manifold stud
Water outlet manifold stud nut
Inlet valve stem guide
Rocker arm push rod guide—upper
Cylinder head dowel
Cylinder head cover
Cylinder head cover gasket
Cylinder head cover bolt
5/16"-18x31"
Coil bracket
Cable tube clip stud
5/16"-18x1-1/8"
Cable tube clip stud nut
5/16"-18x5/16"
1
1
3
12
12
12
1244662113122
CRANKCASE
...
...
,..
...
...
...
...
...
CM 30239
CM 30238
BM 13193
GM 23169
GM 13139
BM 108
BM 29911
BM 70240
CRANKCASE COMPLETE
CRANKCASE AND BEARINGS ASSEMBLY
Welch plug 1-3/4"
Crankcase to cylinder stud—long 1/2"-13x3-9/16"
Crankcase to cylinder stud—short 1/2"-13x2-1/2"
Crankcase to cylinder stud nut 1/2"-13
Crankcase to cylinder stud—medium 1/2"-13x3-1/4"
Crankcase to cylinder stud nut 1/2"-13x1/4"
1
1
1
6
7
13
22
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 19
CRANKCASE (Continued)
Illus.
No.
40
41
42
...
...
...
43
44
45
...
46
47
48
49
50
51
52
53
Part
No. Description Specifications
BM 15090
BM 15091
BM 23569
BM 15093
BM 15094
BM 18399
BM 18382
GM 13120
BM 12498
GM 20862
GM 23158
GM 23157
BM 219
BM 13100
BM 13101
BZ 12275
BM 4946
GM 13115
Front bearing stud—long
Front bearing stud —short
Middle bearing stud
Rear bearing bolt—long
Rear bearing bolt—short
Bearing studs and bolts washer
Bearing studs and bolts nut
Flywheel pointer
Flywheel pointer screw
Oil indicating level plate
Starter operating shaft front bushing
Starter operating shaft rear bushing
Starter operating shaft rear bushing bolt
Starter gear cover
Starter gear cover spring
Starter gear cover spring bolt
Crankcase to generator bolt
Generator adjusting plug
1/2"-13 and 1/2"-20x4-27/32"
1/2"-13 and 1/2"-20x4-27/32"
9/16"-12 and 1/2"-20x4-31/32"
1/2"-20x4-3/4"
1/2"-20x3-7/8"
1/2"-20x5/8"
1/4"-20x7/16"
5/16"-18x3/4"
5/16"-18x1"
1/2"-13x2-1/2"
1"-16x1"
No.
Req.
2
2
4
2
2
12
12
1211111133
OIL FILLER AND LEVEL INDICATOR
...
54
55
56
57
58
59
...
...
60
61
62
63
64
BM 23707
BM 23710
BM 10972
BM 23711
GM 23708
GM 23709
GM 14668
BM 13719
GM 20862
BM 13087
GM 13084
BM 16609
BM 13088
BM 13086
OIL FILLER AND VENT ASSEMBLY :Includes 23710, 23708
and 23709)
Oil filler cover
Oil filler cover spring
Oil filler cover screw
1"-20x1-1/8"
Vent tube
Vent tube cover
Filler tube
Oil level indicator
Oil level indicator plate
Oil level indicator glass
Oil level indicator tube guide
Oil level indicator washer—upper
Oil level indicator washer—lower
Oil level indicator glass cap
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
CRANKCASE FRONT COVER
65
...
66
67
68
69
70
71
BM 23645
23603
GM 24928
GM 24975
BM 23625
BM 13097
BM 23622
BT 395
FRONT COVER COMPLETE ( Includes parts 23603 to 13097
inclusive)
Front cover (Not sold separately)
Front cover silencer
Front cover silencer plate
Front cover camshaft thrust plate
Front cover felt washer
Front cover gasket
Front cover bolt
5/16"-18x5/8"
1
1
1
1
1
1
1
1
1
16
MOTOR BOLTS
72
73
74
75
76
...
77
78
BM 4309
BZ 72
BM 4307
BM 4308
GZ 230
BZ 72
BM 30451
BM 30452
Front motor bolt
1/2"-20x4-5/8" special
Front motor bolt nut 1/2"-20
Front motor bolt spring
Front motor bolt spring seat
Rear motor bolt
1/2"-20x3" special
Rear motor bolt nut 1/2"-20
Front motor support rubber pad
Rear motor support rubber pad
2
2
2
2
4
4
2
2
OIL RESERVOIR
79
...
80
81
82
83
84
85
...
...
...
...
CM 31244
CM 31267
BM 70178
BM 13126
BM 203
BM 31270
BM 62376
BM 31273
BM 70434
BM 70528
BM 31263
BZ 31261
OIL RESERVOIR ASSEMBLY (less tray)
OIL RESERVE TRAY ASSEMBLY (less screen)
Drain plug
Gasket
Oil reservoir to crankcase screw
FILTER SCREEN ASSEMBLY
Baffle
Oil gauge—reservoir unit
Screw—gauge to pan
Screw—wire to gauge
Oil gauge gasket
Oil gauge flange
3/4" socket type
3/8"-16x5/8"
1
1
1
2
30
1615111
When ordering give letter prefix with symbol numbers - Example: CX 28960

20 HUDSON SUPER-SIX PARTS LIST
CRANKSHAFT AND CAMSHAFT GROUP
Illus.
No.
89
90
91
92
93
...
94
95
96
97
98
99
100
101
101
102
103
104
105
Part
No. Description Specifications
BM 30242
GM 30208
GM 30209
GM 30210
BM 30236
BM 30237
BY 3433
BM 29896
BM 29890
BM 23617
GZ 636
CM 29867
BM 22301
BM 13811
BM 8169
BM 23619
BM 23620
BM 23621
BM 23290
CRANKSHAFT ASSEMBLY (Includes parts to
3433 inclusive)
Counterweight Nos. 1, 3, 6 and 8
Counterweight Nos. 2 and 7
Counterweight Nos. 4 and 5
Counterweight stud—medium
Counterweight stud—short
Counterweight stud nut
Starting crank jaw
Fan pulley—"V" type
Fan pulley washer
Fan pulley key
Camshaft
Thrust washer
Shim—thin
Shim—thick
Thrust button
Thrust button spring
Thrust button cup
Thrust button cup washer
FLYWHEEL
1/2"-20x3-3/4"
1/2"-20x3-1/8"
1/2"-20x7/16"
No. 11 Woodruff
No.
Req.
1
4
2
2
4
12
20
111111571111
106
...
107
108
CM 31119
BR 70133
BM 24183
BY 3433
Flywheel
Clutch filler plug
Flywheel bolt
Flywheel bolt nut
3/8" pipe
1/2"-20x1-13/32"
1/2"-20x7/16"
1
1
4
4
VIBRATION DAMPNER
...
109
110
111
112
113
114
BM 29972
BM 29891
BM 29892
BM 29894
BM 29893
BM 70242
BM 29895
VIBRATION DAMPENER ASSEMBLY
Inner ring
Outer ring
Facing
Facing plate
Facing plate cap screw
Spring
Flat head 1/4"-20x3/4"
1
1
1
2
1
3
8
TIMING SPROCKETS AND CHAIN
115
116
117
118
119
120
BM 29889
BM 11799
BM 23607
BM 70006
BM 23608
BM 23627
Crankshaft sprocket
Crankshaft sprocket key
Camshaft sprocket
Camshaft sprocket screw
Water pump shaft sprocket
Drive chain
Woodruff No. "A"
3/8"-16x7/8"
1
1
1
3
1
1
CAMSHAFT BEARINGS
121
122
123
124
...
...
125
126
127
128
129
130
131
132
133
134
134
134
...
...
...
...
...
...
GM 30202
GM 30203
GM 30204
GM 30336
BM 13569
BM 30206
BM 30576
BM 30577
BM 30578
BM 30579
BM 30580
BM 30581
BM 30582
BM 30583
BM 2335
BM 30800
BM 30801
BM 30802
BM 30803
BM 30804
BM 30805
BM 30806
BM 30807
BM 30808
Front bearing cap
Front middle bearing cap
Rear middle bearing cap
Rear bearing cap
Front and rear bearing cap packing
Middle bearing plate
Front bearing—upper
Front bearing—lower
Front middle bearing—upper
Front middle bearing—lower
Rear middle bearing—upper
Rear middle bearing—lower
Rear bearing—upper
Rear bearing—lower
Bearing screw
Front bearing shim
Front bearing shim
Front bearing shim
Middle bearing shim
Middle bearing shim
Middle bearing shim
Rear bearing shim
Rear bearing shim
Rear bearing shim
.002" thick
.005" thick
.0325" thick
.002" thick
.005" thick
.0325" thick
.002" thick
.005" thick
.0325" thick
1
1
1
7
2
1
1
1
1
1
1
1
1
8
4
2
8
8
4
16
428
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 21
CRANKSHAFT BEARINGS
Illus.
No.
135
...
136
137
138
...
...
139
140
141
142
143
144
145
146
147
...
148
...
...
...
...
...
...
149
150
...
152
...
154
155
157
.
158
159
160
161
162
163
164
...
165
...
166
167
168
169
170
171
...
172
173
...
174
175
176
177
Part
No. Description Specifications
BM 13033
GM 12411
BM 23927
BM 23929
BM 13036
BM 12237
GO 12356
BM 31069
BM 31070
BM 29921
GZ 394
BM 70241
GO 12214
BM 29952
BM 29954
BM 29953
GZ 4505
CM 31216
BM 29910
BM 29909
BM 70239
BM 70247
GZ 7115
BM 70247
BM 22296
BM 8228
BM 299221
BM 29363
BM 29929
BM 29931
BM 29930
BM 29364
BZ 5771
BZ 5825
BZ 12799
BM 29094
BM 29021
BM 29338
BM 29339
BM 29034
BM 29903
BM 29902
BM 29985
BM 13043
BM 29341
BM 29946
BM 29884
BM 29883
BM 29885
BM 2t886
BM 26537
BM 23204
BM 60099
BM 29882
BM 13050
BM 31057
BM 31058
BM 31059
BM 50105
BM 29018
BR 3488
BM 29019
Front bearing
Front bearing dowel pin 1/4"x 7/8"
Front middle bearing
Rear middle bearing
Rear bearing
Front and rear middle bearing dowel pin 1/4"x11/16"
Rear bearing dowel pin
1/4”x1-1/4"
INTAKE MANIFOLD
Intake manifold
Intake manifold gasket
IntakE manifold to riser gasket
Intake manifold cap screw
Intake manifold cap screw
Intake manifold elbow
Damper control lever—inner
Damper control lever—outer
Damper control shaft
Taper pin
EXHAUST MANIFOLD
3/8"-16x1-1/4"
5/16"-18x3"
1/8" pipe x7/16"-20
No. 00x5/8"
Exhaust manifold
Gasket—single
Gasket—double
Stud
3/8"-16x1-5/8"
Stud nut
3/8"-16x38" Brass
Manifold to damper body bolt
Manifold to damper body bolt nut
Packing
.Packing nut
Riser gasket
Damper gasket
Outlet tube
Outlet tube packing
Outlet tube packing nut
NOTE: The exhaust damper assembly and all its parts will be serviced
directly through the Marvel Carburetor Company, Flint, Michigan.
Damper operating rod
Adjustable yoke 3/16"
Clevis pin
3/16"x11/16"
Nut
No. 10-32x1/8"
VALVES
Inlet valve
Inlet valve stem guide
Inlet valve spring—outside
Inlet valve spring—inside
Inlet valve spring seat
Exhaust valve
Exhaust valve stem guide
Exhaust valve spring
Exhaust valve spring seat
Valve spring seat retainer
VALVE TAPPET
VALVE TAPPET AND GUIDE ASSEMBLY
Tappet
Tappet guide
Roller
Roller pin
Adjusting screw
Adjusting screw nut
Adjusting screw plate
Guide locating washer
Guide clamp
Rocker arm
Rocker arm bracket—R. H
Rocker arm bracket—L. H.
Hyatt roller bearing
Pivot
Pivot nut
Pivot washer
ROCKER ARM AND PUSH ROD
When ordering give letter prefix with symbol numbers - Example: CX 28960
7/16"-20x29/64"
No.
Req.
6
6
6
6
6
6
6
6
6
12
1
1
1
1
1
2
1
1
1
1
2
4
1
1
1
1
2
1
2
2
2
2
3
3
3
1
1
1
1
1
1
1
1
2
1
12
12
12
12
12
12
12
12
66
6
3
3
6
6
6

22 HUDSON SUPER-SIX PARTS LIST
ROCKER ARM AND PUSH ROD (Continued)
Illus.
No.
178
179
180
181
182
183
...
...
184
185
186
187
188
189
...
190
191
192
193
...
...
194
Part
No. Description Specifications
BM 29037
BM 29038
GY 553
BM 51759
BY 18164
BM 29912
BM 29905
BM 29906
BM 29937
BM 22702
BM 22706
BM 29517
BM 28207
BM 30563
BM 30564
BM 30570
BM 30565
BM 30566
BM 30569
BM 30568
BM 30567
BM 30573
Silencing spring
Silencing spring cup
Silencing spring cup bolt
Oiler
Oiler nut
Push rod
Push rod guide—upper
Push rod guide—lower
PISTON
1/4"-20x5/8"
3/8"-24x3/16"
Piston
Piston pin (Furnished in standard; also .002", .005", .010", .015"
and .020" oversize)
Piston ring (Furnished in standard; also .005", .010", .015" and
.020" over-size)
Piston ring—oil regulating (Furnished in standard; also .005",
.010", .015" and .020" oversize)
Piston pin lock ring
NOTE: When ordering pistons, be certain Co supply cylinder size, which
will be found stamped on the exterior of the cylinder under the cylinderside
plate. Also piston weight, which will be found stamped on top of
each piston. When possible, place orders with your Hudson and Essex dealer.
CONNECTING ROD
Connecting rod complete—R. H. (For cylinders 1-3-5)
Connecting rod complete—L. H. (For cylinders 2-4-6)
Connecting rod dipper
Connecting rod bolt
Connecting rod bolt nut
Connecting rod shim
.002" thick
Connecting rod shim
.005" thick
Connecting rod shim
.0325" thick
Connecting rod bushing—upper end
No.
Req.
6
6
6
6
6
6
6
6
5
6
6
12
12
3
3
6
12
12
24
12
48
8
ADJUSTING ECCENTRIC AND WATER PUM P GROUP
195
...
196
197
198
199
200
201
202
203
204
205
206
207
208
209
...
211
212
213
214
215
...
216
217
...
218
219
220
221
...
...
223
224
...
225
226
BM 23609
23712
BM 27436
BM 23714
BM 3637
BM 23713
GO 18318
BM 30319
BM 23702
BM 18183
BM 23703
BM 18194
BM 23701
BM 23629
BM 23628
BZ 115
BM 16327
BM 21438
BM 25116
GO 18228
BM 794
GM 23162
BZ 115
BM 30321
BM 30294
BM 3637
BM 271
BM 272
BM 13127
BZ 12275
BM 70225
GO 18062
BM 30322
BM 30295
BM 3637
BM 14041
BM 30291
ADJUSTING ECCENTRIC ASSEMBLY
Eccentric body Not sold separately)
Eccentric body gasket
Eccentric body bushing
Eccentric body bushing dowel pin 1/8"x5/8"
Eccentric
Eccentric bolt
1/4"-20x3/4"
Water pump drive shaft
Water pump drive shaft thrust washer
Water pump drive shaft thrust washer screw No. 8-32x5/8"
Water pump sprocket thrust washer
Water pump sprocket thrust washer dowel pin 1/4"x7/16"
Water pump sprocket thrust washer spring
Floating coupling
Stationary coupling
Stationary coupling key Woodruff No. 9
Stationary coupling pin
3/16"x1-5/8"
Generator coupling
Generator coupling clamp
Generator coupling clamp bolt 1/4"-28x2-3/8"
Generator coupling clamp bolt nut 1/4"-28 x 7/32"
Generator coupling sleeve
Generator coupling sleeve key Woodruff No. 9
WATER PUMP BODY ASSEMBLY (Includes bushing)
Water pump body bushing
Front
Water pump body bushing dowel pin
Water pump body bolt
1/4"-20x1-1/4"
Water pump body bolt nut
1/4"-20x1/4"
Water pump body to cylinder gasket
Water pump body to cylinder bolt 5/16"-18x1"
Water pump body to cylinder bolt gasket
Water pump body to crankcase bolt 5/16"-18x1 4"
WATER PUMP COVER ASSEMBLY (Includes bushing)
Water pump cover bushing
Rear
Water pump cover bushing dowel pin 1/8"x5/8"
Water pump cover gasket
Water pump paddle
1
1
1
1
1
1
3
1
1
3
1
1
3
1
1
1
1
1
4
2
2
1
1
1
1
1
5
5
1
2
1
3
1
1
1
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 23
ADJUSTING ECCENTRIC AND WATER PUM P GROUP (Continued)
Illus.
No.
Part
No. Description Specifications
No.
Req.
...
...
227
228
229
230
231
...
232
233
234
235
236
237
238
239
240
241
242
243
...
245
246
247
248
249
250
251
252
253
254
255
255
256
BM 12213
BZ 115
BM 18118
BM 18192
BM 30292
BM 30293
BM 30296
BM 23917
BM 24469
BM 23239
BM 23611
BZ 124
BM 24468
BM 4923
BM 23613
BM 22691
BM 23165
BM 18158
BM 23166
BM 13063
BZ 7911
BM 23652
BM 13073
BZ 122
BM 304
BR 1308
BM 30187
BM 26586
BM 29927
BM 30189
BM 30188
BM 30087
BM 30665
BM 219
Water pump paddle taper pin No. 3x1-3/8"
Water pump paddle key Woodruff No. 9
Water pump drain cock
1/4" pipe
Water pump grease cup
Water pump packing nut—front
1-1/4"-18 tap R.H. thread
Water pump packing nut—rear
1-1/4"-18 tap L.H. thread
Water pump packing
DISTRIBUTOR DRIVE AND OIL PUMP GROUP
DISTRIBUTOR DRIVE SHAFT AND BRACKET
ASSEMBLY 1
Bracket
Bracket gasket
1
1
Drive shaft 1
Drive shaft nut 3/8"-24x13/32" 2
Drive shaft bushing 2
Drive shaft key
Drive shaft driven gear
Woodruff No. 4
21 teeth
1
1
Distributor gasket
Drive washer
1
1
Drive washer bolt
1/4"-28x1/2"
Drive washer bolt lock 1
Oil pump drive worm 1
Oil pump drive worm taper pin
Oil pump drive gear housing
No. 00x3/4" 1
1
Housing stud
Housing stud nut
5/16"-18x1-1/4"
5/16"-18x5/16"
3
3
Housing bolt 3/8"-16x1" 1
Housing bolt 3/8,'"-16x1-1/8" 2
Worm wheel 14 teeth 1
Worm wheel shim
Worm wheel bushing
1
2
Worm wheel shaft
Bearing
1
1
Bearing gasket 1
Bearing shim 1
Bearing bolt 5/16"-18x3/4" 2
1
1
1
1
1
1
2
...
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
...
276
277
278
279
280
...
...
281
282
283
BM 30248
BM 29923
BM 13072
BM 30084
BM 120
BM 101
BM 30199
BM 29925
BM 20442
BM 19959
GM 19960
BM 6791
BM 30247
BM 18379
BM 28331
BM 70285
BM 29879
BM 5655
BM 13077
GM 22433
BO 18138
BM 31393
BM 11828
GO 18197
BM 11829
BM 30023
BM 12116
BM 30024
BM 11842
BO 12112
GO 12214
OIL PUMP
OIL PUMP AND PLUNGER ASSEMBLY.
Oil pump body
Body gasket
Oil pump oil deflector
Body pipe plug
Steel balL
Main plunger
Main plunger spring
Distributor plunger
Distributor plunger spring
Distributor plunger plug
Distributor plunger plug gasket
Inlet connection
Inlet connection gasket
Bowl
Steel ball
OIL PIPES AND FITTINGS
Filter to crankcase pipe assembly
Clamp
1
1
Union 1/2"-20 and 5/"-18 1
Clip 1
Clip screw No. 10-32x5/8" 1
Oil pump to crankcase pipe assembly
Union nut 5/16"
1
2
Clip
Elbow
5/16"
3/8" pipe and 7/16"-20
1
1
Oil pump to union pipe assembly 1
Elbow 1/8" pipe and 7/16"-20 1
Union to gauge pipe assembly 1
Oil pump to union and union to gauge pipes union
nut 1/4" 4
Oil pump to union and union to gauge pipes union 1/4" double
Elbow—oil pump to union tube
1
When ordering give letter prefix with symbol numbers - Example: CX 28960
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

24
Clutch Assembly

HUDSON SUPER-SIX PARTS LIST 25
MUFFLER AND EXHAUST PIPE
Illus.
No.
...
...
...
...
...
...
...
...
...
...
...
...
..
...
...
...
...
Part
No. Description Specifications
A 31529
CM 31001
BM 13826
BM 2397
BZ 16498
CM 30114
BZ 16499
BM 219
BZ 12275
BZ 122
BM 30115
BM 18062
BZ 122
BZ 54709
BZ 54710
BZ 12275
BZ 122
MUFFLER ASSEMBLY
Exhaust pipe
Exhaust pipe covering
Exhaust pipe covering strap
Exhaust pipe clamp
Tail pipe
Tail pipe clamp
Exhaust and tail pipe clamp bolt
Exhaust and tail pipe clamp bolt
Exhaust and tail pipe clamp bolt nut
Tail pipe clip—front
Tail pipe clip bolt
Tail pipe clip bolt nut
Tad pipe clip (Attaches to gas tank strap)
Tail pipe clip cap
Tail pipe clip cap bolt
Tail pipe clip cap bolt nut
5/16"-18x3/4"
5/16"-18x1"
5/16"-18x5/16"
5/16"-18x1-1/4"
5/16"-18x5/16"
5 16"-18x1"
5/16"-18x5/16"
No.
Req.
1
1
2
3
1
1
1
4
2
6
1
1
1
1
1
1
1
CLUTCH
...
12456789
10
11
12
13
14
15
16
....
17
18
19
20
22
23
24
BR 31115
BR 31120
BZ 908
BR 31133
BR 31159
BR 598
BR 31121
BM 219
BR 29523
BR 31132
BM 18404
BR 62282
BR 62288
BR 62289
BR 31131
BR 31128
BR 70490
BR 18224
BR 31221
BZ 9773
BR 31129
BR 31117
BR 29359
BR 30899
CLUTCH ASSEMBLY
Cover
Cover bolt
Cover gasket
DRIVING PLATE ASSEMBLY
Driving plate cork
Pressure plate
Pressure plate cap screw
Pressure plate cap screw lock plate
Toggle bracket
Toggle bracket nut
Toggle bracket gasket
Toggle arm pin
Toggle arm lock plate
Shifter finger
Shifter plate
Rivet
Thrust bearing
THRUST BEARING RETAINER ASSEMBLY
Thrust bearing retainer pipe plug
Thrust bearing retainer washer
SHIFTING SLEEVE ASSEMBLY
Main spring
Oil deflector
5/16"-18x7/8"
5/16"-18x3/4"
7/16"-20x17/32"
1/8"x11/32"
4" headless
1
1
8
1
1
144
1844444441211111
12
1
TRANSMISSION
...
...
1
...
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
23
...
CT 31228
CT 31230
CT 31086
BT 22812
BS 9956
BS 9957
BZ 2346
BT 10848
BT 29371
BT 57
BT 70136
BT 29373
BT 70138
BT 31134
BT 22807
BM 304
BT 29372
GT 3014
BT 2751
BT 16348
BT 9809
BT 9838
BT 9831
BT 9832
BT 10977
BT 10976
GT 30860
TRANSMISSION ASSEMBLY
TRANSMISSION ASSEMBLY
Transmission case
Case cover gasket
Case drain plug
Case drain plug gasket
Case oil level pipe plug
Case bearings lock screw
Main shaft drive gear
Main shaft drive gear steel ball
Main shaft drive gear outer ball bearing
Main shaft drive gear inner bushing
Main shaft drive gear pilot ball bearing
Front bearing cap
Front bearing cap gasket
Front bearing cap screw
Main shaft
Main shaft nut
Main shaft nut washer
Main shaft high and intermediate gear
Main shaft low and reverse gear
Main shaft rear bearing
Main shaft rear bearing front steel washer
Main shaft rear bearing rear steel washer
Main shaft rear bearing shins—thin
Main shaft rear bearing shim—thick
REAR BEARING CAP ASSEMBLY
4-5/12 to 1 R.A. ratio
4-1/13 to 1 R.A. ratio
1/4"-20
3/8'' extension head
3/8"
N. D. 1308
N D. 1204
3/8"-16x1"
3/4"-16x9/16" slotted head
25 teeth
31 teeth
.010" thick, square hole
.090" thick, square hole
4-5/12 to 1 ratio.
1
I
I
I
1
1
1
3
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 27
TRANSMISSION (Continued)
Illus.
No.
...
24
25
26
27
28
29
...
30
30
30
...
31
32
33
...
34
35
36
37
38
39
40
...
41
42
43
43
43
44
45
46
47
48
49
50
51
52
53
...
...
...
...
55
56
57
58
59
Part
No. Description Specifications
GT 30861
BT 22745
BT 6457
BT 9828
BM 304
BT 9833
BT 10965
BT 10964
GZ 3874
BT 9820
BT 9821
BT 9822
BT 29079
BT 29842
GO 23071
BT 22942
BT 29078
BT 29841
BT 23871
BT 22753
BT 9805
BT 9837
GT 9826
BT 9827
BM 304
BT 10171
BT 10170
BT 10684
BT 10683
BT 10682
BT 396
BT 16349
BT 16350
NT 355
BT 9812
GT 357
BT 9811
BT 7476
BT 9806
BT 24523
BT 31143
BT 24473
BT 24472
BY 3433
BM 113
BT 70487
BZ 72
BO 18161
BZ 122
REAR BEARING CAP ASSEMBLY
Rear bearing cap
Rear bearing cap felt washer
Rear bearing cap gasket
Rear bearing cap screw
Rear bearing cap bronze washer
Rear bearing cap bronze washer dowel pin
Rear bearing cap oil guide
Rear bearing cap oil guide rivet
Rear bearing cap shim
Rear bearing cap shim
Rear bearing cap shim
Speedometer drive gear
Speedometer drive gear
Speedometer drive gear washer
Speedometer drive gear spacer
Speedometer drive pinion
Speedometer drive pinion
Speedometer drive pinion sleeve
Speedometer drive pinion shim
Countershaft
Countershaft bearing
Countershaft bearing cap
Countershaft bearing cap gasket
Countershaft bearing cap bolt
Countershaft bronze washer
Countershaft steel washer
Countershaft shim—rear end
Countershaft shim—rear end
Countershaft shim—rear end
Countershaft gear key
Countershaft drive gear
Countershaft second gear
Countershaft low gear
Countershaft reverse gear
Countershaft gear spacing collar
Reverse idler gear
Reverse idler gear bearing
Reverse idler gear shaft
Reverse idler gear thrust washer
CLUTCH THROWOUT YOKE ASSEMBLY
Clutch throwout yoke bushing
Clutch throwout yoke bolt
Clutch throwout yoke bolt nut
Transmission to crankcase bolt
Transmission to crankcase shoulder bolt
Transmission to crankcase bolt nut
Starter pedal stop set screw
Starter pedal stop set screw nut
No.
Req.
4-1/13 to 1 ratio 1
111
3/8"x16x1" 3
1
1/8"x5/16" 1
1
Button head 1/8"x5/8 2
.005"
.010"
1
1
.016" 1
4-1 /13 to 1 R. A. ratio 1
4-5/12 to 1 R. A. ratio 1
11
4-1/13 to 1 R. A. ratio 1
4-5/12 to 1 R. A. ratio 1
111222
3/6""-16x1" 6
22
.005" 1
..010" 1
..016" 1
Woodruff No. 18
30 teeth
4
1
23 teeth
17 teeth
1
1
14 teeth 1
1111111
1/2"-20x2-3/4'
1/2"-20x7/16"
1
1
1/2"-13x2-1/4"
1/2"-20x3-9/16"
2
2
12"-20x9/16" 3
5/16"-18x743" 1
5/16"-18x5/16" 1
CONTROL LEVERS
...
123456789
10
11
12
13
14
15
16
...
17
18
19
20
21
22
BS 31044
BS 24981
BS 24980
BS 22840
BS 22838
BS 22839
BS 22842
BS 3037
BS 30053
BS 22841
BS 22837
BS 29170
BS 30092
BS 22844
BM 219
BS 29073
BZ 12275
GO 18096
BS 22852
BS 22851
BS 22853
BM 306
BS 22858
BS 22859
CONTROL LEVER ASSEMBLY
Gear shift lever
Gear shift lever key
Gear shift lever pin
Gear shift lever spring
Gear shift lever spring seat
Gear shift lever cover
Gear shift lever cover taper pin
Gear shift lever cover silencer
Gear shift lever ball cup
Gear shift lever felt washer
Gear shift lever ball
Gear shift lever housing
Gear shift lever housing gasket
Gear shift lever housing bolt
TRANSMISSION CASE COVER
Transmission case cover cap screw
Transmission case cover clevis pin
Second and high gear shifting shaft
Low and reverse gear shifting shaft
Shifting shafts lock
Shifting shafts lock ball
Shifting shafts lock ball spring
Shifting shafts lock ball spring cap
No. 2x1" 1
111111
1
1
1
1
1
1
1
5/16"-18x3/4" 4
1
5 /16"-18x1" 8
3/16"x1-1/2" 1
112
9/16" 2
2
3/4"-16 thread
When ordering give letter prefix with symbol numbers - Example: CX 28960

28 Control Lever Assembly

HUDSON SUPER-SIX PARTS LIST 29
CONTROL LEVERS (Continued)
Illus.
No.
23
24
25
26
27
28
29
...
31
...
32
33
34
35
36
...
1
...
2
3
...
4
...
5
6
...
7
8
9
...
10
11
12
13
14
...
15
16
...
17
18
..
1
...
...
2
...
3
4
5
6
7
...
8
...
9
10
11
12
...
...
...
Part
No. Description Specifications
BS 22854
BS 22855
BZ 31045
BZ 3095
BZ 122
BZ 1015
BS 31046
BZ 142
GZ 22873
BZ 1015
GZ 719
BS 13294
GZ 13295
GZ 22874
BM 18192
BS 29065
BS 29067
BS 62331
BS 62332
BR 1308
BM 110
BS 62333
BS 70495
BS 62334
BS 29071
BR 611
BS 62327
BS 62328
BZ 8683
BM 12440
BS 62329
BS 62330
BS 29069
BS 22861
BS 12123
BS 7435
BS 62872
BS 6705
BM 110
BS 62325
BS 62326
GZ 31029
BZ 24889
GZ 24888
BR 1308
GZ 31032
BZ 25447
BX 18341
BZ 5402
GZ 31031
BZ 1015
GZ 31037
BZ 115
BZ 30744
BZ 1015
BZ 23083
BY 3212
BZ 29544
BZ 23531
BZ 62
BY 3212
BM 12370
BM 272
BM 11829
No.
Req.
Shifting fork 2
Shifting fork screw
STARTER PEDAL
5/16"-24 thread 2
1
Starter pedal stop screw
Starter pedal stop screw lock nut
1
1
Starter pedal taper pin No. 2x1-1/4" 1
Starter pedal shaft 1
Starter pedal shaft key Woodruff No. 6 2
Starter pedal shaft lever
Starter pedal shaft lever taper pin 2"x1-1/4"
1
1
Starter pedal shaft lever clevis pin
Starter pedal shaft lever spring
1
1
Starter pedal shaft lever spring clip 1
Starter pedal operating rod 1
Starter pedal operating rod oil cup 1
HAND BRAKE LEVER
HAND BRAKE LEVER ASSEMBLY 1
Hand brake lever 1
Hand brake lever bushing 1
Hand brake lever bracket 1
Hand brake lever bracket bolt
Hand brake lever bracket bolt nut
3/8"-16x1-1/8"
3/8"-16x3/8"
1
1
Hand brake lever shaft
Hand brake lever shaft taper pin No. 2x1"
1
1
Brake lever pivot spring 1
Hand brake lever pull rod pivot 1
Hand brake lever pull rod front nut 5/16"-24x17/64' 1
Latch—inside
Latch—outside
1
1
Latch clevis pin
Latch clevis pin
5/16"x1"
1/4"x59/64"
1
1
Latch spring 1
Latch spring hook 1
Latch rod 1
Latch grip
Latch grip screw No. 10-32x13/16"
1
1
Latch grip screw nut No. 10-32x3" 1
Ratchet 2
Ratchet bolt 3/8"-16x2-1/8" 2
Ratchet bolt nut
Ratchet spacer
3/%"-16x3/8" 2
2
Ratchet frame spacer 2
PEDAL CONTROL
PEDAL CONTROL ASSEMBLY 1
PEDAL BRACKET ASSEMBLY (Includes bushing) 1
Pedal bracket bushing 2
Pedal bracket bolt
Brake pedal assembly
4
1
Brake pedal bushing
Brake pedal set screw
1
1
Brake pedal set screw nut 1
Clutch pedal assembly 1
Clutch pedal taper pin 1
Clutch pedal shaft
Clutch pedal shaft key
1
1
Clutch pedal shaft lever 1
Clutch pedal shaft lever taper pin 1
Clutch pedal spring 1
Clutch pedal clevis pin
Clutch pedal link
1
1
Clutch pedal adjustable link
Clutch pedal adjustable link nut .
1
1
Clutch pedal adjustable link clevis pin 1
VACUUM TANK CONNECTIONS AND GASOLINE PIPES
NOTE: We do not carry in stock vacuum tank assemblies or service parts for
them. All matters pertaining to replacements should be taken up direct with
the Stewart-Warner Speedometer Corp., Chicago, Ill.
Vacuum tank to dash bolt 1/4"-20x1-1/2" 4
Vacuum tank to dash bolt nut 1/4"-20x1/4” 4
Union elbow 1/8" pipe x1/2"-20 1
When ordering give letter prefix with symbol numbers - Example: CX 28960

32
Accelerator, Spark and Throttle Control

HUDSON SUPER-SIX PARTS LIST 33
VACUUM TANK CONNECTIONS AND GASOLINE PIPES (Continued)
Illus.
No.
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
GO 31013
BM 11828
GO 13733
BO 12126
BZ 12799
BM 31389
BM 11828
BO 31391
BM 11828
BZ 31355
No.
Req.
Gas tank to vacuum tank pipe assembly
Gas tank to vacuum tank pipe union nut 1/2"-20x5/16"
1
2
Gas tank to vacuum tank pipe clip 7
Gas tank to vacuum tank pipe clip screw
Gas tank to vacuum tank pipe clip screw nut
No. 10-32x/3"
No. 10-32x1/8"
4
4
Vacuum tank to carburetor pipe assembly
Vacuum tank to carburetor pipe union nut 7/16"-20x1/4"
1
2
Vacuum tank to manifold pipe assembly
Vacuum tank to manifold pipe union nut
1
2
Vacuum tank and windshield wiper suction connection 1
CARBURETOR
1
...
2
3
4
5
...
6
7
8
9
10
...
...
...
...
...
11
12
13
14
15
...
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
...
...
...
...
...
...
...
...
...
...
BZ 61517
BZ 7911
BZ 25327
BZ 29469
BZ 60574
BZ 25364
BZ 7911
BZ 22699
BZ 29455
BZ 5771
BZ 12799
BZ 5825
BZ 81823
BZ 29198
BZ 82690
BO 70121
BZ 70122
GZ 30190
GZ 30196
BZ 13532
BZ 14446
BM 794
BZ 7911
BZ 23161
BZ 12799
BZ 13527
BM 219
BZ 30191
BZ 29459
BZ 12799
BZ 5771
BZ 5825
BZ 30193
BM 794
BZ 5774
BZ 8682
BZ 29460
BZ 29461
BZ 13542
BZ 25365
BZ 79754
BO 70124
BZ 79471
BZ 29195
BZ 29190
BZ 7343
BZ 18448
BZ 79469
BM 794
GZ 70154
The carburetor and riser assembly and all its parts will be serviced directly
through the Marvel Carburetor Company, Flint, Michigan.
ACCELERATOR
Accelerator pedal
Accelerator pedal taper pin No. 00x3/4"
1
1
Shaft 1
Bracket—cross shaft to toe plate
Shaft lever—long
2
1
Shaft lever—short
Shaft lever taper pins No. 00x3/4"
1
2
Shaft silencing spring
Shaft to carburetor rod
1
1
Shaft to carburetor rod yoke
Shaft to carburetor rod nut
3/16"-32
No. 10-32x1/8"
1
1
Shaft to carburetor rod clevis pin 3/16"x11/16" 2
MIXTURE CONTROL ASSEMBLY
Mixture control wire tube dip
1
1
Mixture control shaft and wire assembly
Mixture control shakeproof Iockwasher
1
1
Mixture control nut 1
SPARK AND THROTTLE CONTROL
SPARK CONTROL
Cross tube 1
Cross tube lever—R. H.
Cross tube lever—L. H.
1
1
Cross tube lever clamp bolt
Cross tube lever clamp bolt nut
1/4"-28x1" special
1/4"-28x7/32"
1
1
Straight pin—lever to tube
Lever to distributor link
1
1
Lever to distributor link nut No. 10-32 2
Cross tube bracket
Cross tube bracket bolt 5/16"-1804"
1
1
Cross tube collar
Steering gear to control shaft rod
1
1
Steering gear to control shaft rod nut
Steering gear to control shaft rod yoke
No. 10-32
3/16"-32
1
1
Steering gear to control shaft rod clevis pin 3/16"x11/16"
THROTTLE CONTROL
2
Throttle control rod 1
Throttle control rod nut
Throttle control rod clevis
1/4"-28x7/32"
1/4"x28 thread
1
1
Throttle control rod clevis pin.
Throttle control trunnion
1/4"x7/8" 1
1
Throttle control rod collar
Throttle control spring
1
1
Throttle control spring clip 1
HEAT CONTROL
DIAL ASSEMBLY 1
Dial attaching screw 4
Operating lever 1
Operating lever spring 1
Operating lever bracket 1
Operating lever bracket clevis pin 3/8x1-9/16" 1
Operating lever bracket rivet No. 9x1/4" tubular 3
Operating rod 1
Operating rod nut 1/4"-28x7/32" 1
Operating rod clevis 1/4"-28 1
When ordering give letter prefix with symbol numbers - Example: CX 28960

34 HUDSON SUPER-SIX PARTS L;IST
HEAT CONTROL (Continued)
Illus.
No.
...
...
1
2
3
4
5
6
7
..,
8
9
...
10
11
...
...
...
12
13
14
15
16
17
18
19
20
21
...
...
22
...
...
23
24
25
26
...
...
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
...
46
...
47
...
...
...
...
48
49
50
Part
No. Description Specifications
BZ 8682
BZ 70156
BZ 31184
BZ 29243
BZ 29244
BR 611
BZ 31183
BZ 8683
BZ 31182
BZ 8683
BZ 29287
BZ 31186
BZ 8683
BZ 70301
BZ 31185
BZ 29243
BZ 29244
BR 611
BZ 31008
BZ 31187
BZ 70301
BZ 31177
BZ 29265
BZ 124
BZ 70119
BZ 31173
BZ 275
BM 110
BZ 31176
BZ 275
BM 110
BZ 31175
BZ 275
BM 110
BZ 31178
BZ 31158
BZ 3205
BZ 31174
BZ 275
BM 110
BZ 31181
BZ 5282
BZ 62
BY 3212
BZ 31011
BZ 31010
BZ 31009
BZ 30868
BZ 29274
BZ 29273
BZ 31163
BZ 31169
BZ 31170
BZ 12481
BZ 31171
BZ 31172
BZ 1062
BZ 2344
BZ 31165
BZ 31169
BZ 31171
GZ 119
BM 110
BZ 31167
BZ 31169
BZ 31171
GZ 119
BM 110
BZ 31161
BZ 31162
BZ 2360
Operating rod clevis pin
Clevis pin
BRAKE CONTROL
1/4"X7/8"
1/4"x9/32"
Brake rod—front brake to front idler lever
Brake rod spring—front end
Brake rod nut—front end
Brake rod lock nut—front end
Brake rod—front idler lever front to cross shaft lever
Clevis pin—front idler lever
Brake rod—front cross shaft to rear cross shaft
Clevis pin—front cross shaft to rear cross shaft rod
Play link—front cross shaft to rear cross shaft rod
Brake rod—rear cross shaft to rear idler lever
Clevis pin—rear cross shaft to rear idler lever rear
Clevis pin—rear cross shaft to rear idler lever front
Brake rod—rear idler lever to rear brake
Brake rod spring—rear end
Brake rod nut—rear end
Brake rod lock nut—rear end
Brake rod—hand brake to rear cross shaft lever
Slide yoke—hand brake to rear cross shaft lever rod
Clevis pin—hand brake to rear cross shaft lever rod
Front idler lever
Front idler lever pivot
Front idler lever pivot nut
Front idler lever pivot nut washer
Front cross shaft lever—center and ends
Front cross shaft lever bolt
Front cross shaft lever bolt nut
Rear cross shaft lever—outer
Rear cross shaft lever bolt
Rear cross shaft lever bolt nut
Rear cross shaft lever—inner
Rear cross shaft lever bolt
Rear cross shaft lever nut
Rear idler lever
Rear idler lever support
Clevis pin—rear idler lever to support
Front cross shaft to pedal rod lever
Front cross shaft to pedal rod bolt
Front cross shaft to pedal rod bolt nut
Brake rod—brake pedal to front cross shaft
Yoke end—brake pedal to front cross shaft rod
Nut—brake pedal to front cross shaft rod
Clevis pin—brake pedal to front cross shaft rod
Spring—stoplite to brake pedal
Spring—brake pedal release
Spring—rear brake release
Clip—rear brake release spring
Spring—hand brake release
Clip—hand brake release spring
BRAKE CROSS SHAFT BEARING PLATE ASSEMBLY—
front and rear outer
Brake cross shaft bearing plate roller
Brake cross shaft bearing plate roller bolt
Brake cross shaft bearing plate roller bolt nut
Brake cross shaft bearing plate roller rivet
Brake cross shaft bearing plate roller washer
Bolt—bearing plate assembly to frame
Nut—bearing plate assembly to frame bolt
BRAKE CROSS SHAFT BEARING PLATE ASSEMBLY—
front to center
Brake cross shaft bearing plate roller
Brake cross shaft bearing plate roller rivet
Bolt—bearing plate assembly to cross member
Nut—bearing plate assembly to cross member
BRAKE CROSS SHAFT BEARING PLATE ASSEMBLY
rear center
Brake cross shaft bearing plate roller
Brake cross shaft bearing roller rivet
Bolt—bearing plate assembly to cross member
Nut—bearing plate assembly to cross member bolt
Brake cross shaft—front
Brake cross shaft—rear
Brake cross shaft Woodruff key
When ordering give letter prefix with symbol numbers - Example: CX 28960
No.
Req.
2
1
2
2
2
2
2
4
1
2
1
2
2
2
2
2
2
2
1
1
1
2
2
2
4
3
3
3
2
2
2
1
1
1
4
2
2
1
1
1
1
1
2
2
1
1
1
1
1
1
4
12
44
12
888
1
2222
1
22221I7

36 HUDSON SUPER-SIX PARTS L;IST
UNIVERSAL JOINTS AND PROPELLER SHAFT
Illus.
No.
...
1
...
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Part
No. Description Specifications
CZ 31484
CZ 31022
BZ 20040
GZ 31138
BZ 9906
BZ 18106
BR 611
BZ 23273
BZ 7840
BZ 1067
BZ 1065
BZ 7836
BZ 7843
BZ 7833
BZ 7835
BZ 9773
BZ 20146
BZ 20147
BZ 18052
BZ 12799
BZ 7834
BZ 7831
BZ 7832
BZ 20145
REAR UNIVERSAL JOINT AND PROPELLER SHAFT
ASSEMBLY
Propeller shaft
FRONT UNIVERSAL JOINT ASSEMBLY (Includes
9905, also 18106 to 20145 inclusive)
Companion flange—front
Companion flange—rear
Companion flange bolt
Companion flange bolt nut
Companion flange bolt nut lock
Flange yoke
Bushing
Bushing lock ring
Cross
Inside casing
Outside casing
Outside casing packing
Lubrication plug
Outside casing spring
Outside casing spring retainer
Outside casing spring retainer bolt
Outside casing spring retainer bolt nut
Dust cap
Dust cap felt washer
Dust cap felt washer retaining disc
Sleeve yoke
No.
Req.
1
1
1
1
1
12
12
12
2882222222441111
STEERING GEAR
...
...
...
1
2
3
4
5
...
6
7
8
9
10
11
12
13
14
15
16
17
...
...
18
19
...
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
CZ 31215
CZ 31655
BZ 31651
BZ 31653
BZ 31676
BZ 29740
BZ 29744
BZ 70571
BZ 232
BZ 29746
BZ 70194
BZ 63044
BZ 31681
BZ 31673
BZ 31675
BZ 30935
BZ 18358
BZ 9182
BZ 31661
BZ 31672
BZ 30514
BZ 70140
BZ 72
BZ 31664
BZ 31666
BZ 8394
BZ 31679
BZ 31680
BZ 31656
BZ 30829
BZ 29749
BZ 22641
BZ 20005
BZ 29750
BZ 29748
BZ 70201
BZ 31670
BZ 30165
BZ 70278
BZ 31678
BZ 30934
CZ 30316
BZ 8394
BZ 26145
CZ 30930
BZ 30791
STEERING GEAR COMPLETE
CONTROL ASSEMBLY
CASE AND GEARS COMPLETE
CASE ASSEMBLY
Case adjustment stud
Case eccentric adjusting sleeve
Case eccentric adjusting sleeve lock ring
Case clamp bolt
Nut—case clamp bolt
Case stud
Nut—case stud
Eccentric rivet
Lower control bracket
Cork washer—lower control bracket
Spring washer—lower control bracket oil retainer
Gasket—lower control bracket
Lower control bracket machine screw
Lower control bracket bolt
Case cover
Gasket—case cover
Bracket—frame
Bolt—frame bracket
Nut—frame bracket bolt
Main column tube
WORM
Worm key
Roller bearing cage—column
Cup—roller bearing cage
ADJUSTING SLEEVE ASSEMBLY (Includes cups)
ROLLER TOOTH AND SHAFT ASSEMBLY
Bushing—roller tooth and shaft
Nut—roller tooth shaft
Lock—roller tooth shaft nut
Thrust washer—roller tooth shaft
Screw—roller tooth shaft adjusting
Nut—roller tooth shaft adjusting screw
Arm—roller tooth shaft (steering)
Adjusting screw—adjusting sleeve
Nut—adjusting sleeve screw
Dust washer—adjusting sleeve
Retainer—ad lusting sleeve dust washer
STEERING WHEEL ASSEMBLY
Key—steering wheel
Nut—steering wheel
JACKET TUBE AND BUSHING ASSEMBLY
Bushing—jacket tube—lower
7/16'-20x2-7/8"
7/16"-20x3/8"
1/4"-20x3/4"
1/4"-20x1"
1/2"-20x1-3/8"
1/2"-20x9/16" castle
1
1
1
1
1
1
1
1
1
3
3
1
1
1
1
1
2
1
1
1
1
2
2
1
1
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960

Universal Joint and Propeller Shaft Assembly
37

38 HUDSON SUPER-SIX PARTS L;IST
STEERING GEAR (Continued)
Illus.
No.
40
...
...
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
...
64
65
66
67
68
69
70
71
72
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
BZ 30933
BZ 70545
BZ 70543
BZ 80593
GZ 18338
BZ 31683
BZ 30489
BZ 30761
CZ 31684
BZ 30497
BZ 30496
BZ 10137
BZ 18357
BZ 29559
CZ 31685
BZ 63062
BZ 10140
BZ 18358
BZ 29561
BZ 29562
BZ 29560
BZ 30538
CZ 31686
BZ 30507
BZ 30508
BZ 30797
BZ 30308
BZ 30539
BZ 30590
BZ 30509
BZ 62088
BZ 30513
BZ 30317
BZ 30327
BZ 30823
CZ 31210
CZ 31212
BZ 23740
BZ 23739
BZ 23738
BZ 9844
BZ 22166
A 81250
A 81251
A 81252
A 81248
A 81249
A 81898
A 81899
A 81900
A 81901
A 81896
A 81897
A 79835
A 79836
BM 304
BM 110
BM 219
BO 18447
BZ 12799
GZ 10214
BO 23410
BZ 12275
GO 23883
A 81052
A 8105
Clamp—jacket tube to adjusting sleeve
Bolt—jacket tube clamp
Nut—jacket tube clamp bolt
Jacket tube bracket
Screw—jacket tube bracket
STATIONARY TUBE ASSEMBLY
Stationary tube silencer—upper
Stationary tube silencer—lower
THROTTLE TUBE ASSEMBLY
Throttle tube hand lever
Throttle tube hand lever lock wire
Throttle tube pinion
Clamp screw—throttle tube pinion
Throttle sector
SPARK TUBE ASSEMBLY
Spark tube hand lever,
Spark tube pinion
Screw—spark tube pinion
Sector stud
Spring—sector stud
Spark sector
Lock wire
LIGHT TUBE ASSEMBLY
Light control lever
Lock wire—light control lever
Control cup friction band
Light control switch—lower
Light control switch anchor
Clamp nut—light tube—lower
HORN BUTTON
Horn button contact washer
Horn button spring
Stationary tube cup
Lock wire—stationary tube cup
Horn wire assembly
DRAG LINK ASSEMBLY
Drag link
Ball seat
Plug
Spring
Front boot
Rear boot
DRAG LINK
FENDERS
5/16"-24x2"
5/16"-24x17/64"
5/165-18x1"
1/4"-20x7/8"
1/4"-20x3/4"
1-3/16"-18 thread
Specify color of fenders required or prime coat. Give car number if for a
specific car.
Front fender—R. H. (Pocket type) (standard equipment)
Front fender—L. H. (standard equipment)
Front fender—L. H. (Pocket type) (special equipment)
Rear fender—R. H. (Sedan and Coach)
Rear fender—L. H. (Sedan and Coach)
Rear fender—R. H. (Landau Sedan)
Rear fender—L. H. (Landau Sedan)
Rear fender—R. H. (Victoria)
Rear fender—L. H. (Victoria)
Rear fender—R. H. (Phaeton and Town Sedan)
Rear fender—L. H. (Phaeton and Town Sedan)
Rear fender—R. H. (Coupe and Roadster)
Rear fender—L. H. (Coupe and Roadster)
Bolt—Front fender
3/8"-16x1"
Nut—Front fender bolt
3/8"-16x3/8"
Bolt—Front fender
5/16"-18x3/4"
Screw—Front and rear fender
No. 10-32x1/8" Rd. Hd.
Nut—Front and rear fender screw No. 10-32x1/8"
Bolt—Rear fender
1/2"-13x1-1/4"
Clip—Rear fender
Screw—Rear fender clip
Plate—Rear fender
RUNNING BOARD AND RADIATOR SPLASH GUARDS
Running board splash guard—R. H.
Running board splash guard—L. H.
No.
Req.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
6
6
2
22
22
6
14
14
4
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 39
Steering Gear Assembly

40 HUDSON SUPER-SIX PARTS L;IST
RUNNING BOARD AND RADIATOR SPLASH GUARDS (Continued)
Illus.
No.
Part
No. Description Specifications
No.
Req.
...
...
...
...
...
BZ 12799
BO 18447
A 81086
GO 22949
A 13166
Splash guard screw
Machine screw (splash guard)
Radiator splash guard
Radiator splash guard shim
Flywheel guard
4
4
1
1
1
REAR DUST SHIELD ASSEMBLY
,,,
...
A 81698
BO 70149
REAR DUST SHIELD ASSEMBLY
Machine screw
1/4"-20x1-1/4"
1
4
MOTOR SPLASH GUARDS
...
...
...
...
...
...
...
A 30275
A 30276
A 30277
GY 553
GY 3820
BO 12126
BZ 12799
Motor splash guard—front
Motor splash guard—R. H.
Motor splash guard—L. H.
Screw—Front motor splash guard
Screw—Splash guard—R. H. and L. H.
Screw—Motor splash guard
Nut—Motor splash guard screw
1/4"-20x5/8"
5/16"-18x1/2"
No. 10-32x5/8"
No. 10-32x1/8"
1
1
1
4
7
16
16
RUNNING BOARD
...
...
...
...
...
...
...
CZ 81147
BO 18447
BZ 12799
CZ 81254
CZ 82218
BZ 18107
CZ 81190
RUNNING BOARD ASSEMBLY
Screw—round head—running board
Nut—running board screw
Outer moulding
Moulding—inner and ends
Rivet—split
Running board covering
No. 10-32x1/8"
No. 10-32x1/8"
9/64"x3/8"
2
12
12
22
80
2
TIRE CARRIER (Fender Type)
(Standard Equipment)
...
...
...
...
...
...
...
...
...
...
...
...
...
BZ 81732
BO 31240
BZ 81680
BZ 9130
BZ 70505
BZ 81679
BZ 1430
BZ 122
BZ 81267
BZ 81676
BZ 81677
BZ 81678
BZ 81706
Spare tire lock
Spare tire lock key
Spare tire to dash brace assembly
Spare tire to dash brace nut
Spare tire to dash brace rubber ferrule
Spare tire to dash bracket
Spare tire to dash bracket screw
Spare tire to dash bracket screw nut
Front fender stirrup—R. H.
Spare tire clamp
Spare tire clamp bolt
Spare tire clamp bolt tee nut
Spare tire strap assembly
1
1
1
1
1
1
3
1
I
3
1
1
1
SPECIAL EQUIPMENT
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
A 81252
BZ 80610
BZ 52961
BZ 122
BZ 81268
BZ 81681
BZ 9130
BZ 70505
BZ 81679
BZ 1430
BZ 122
BZ 81676
BZ 81677
BZ 81678
BZ 81706
BZ 82529
BZ 82530
BZ 81732
BO 31240
The following parts are necessary when pocket fender tire carrier
is desired for left side.
Front fender assembly—L. H.
Front fender rear reinforcement
Front fender rear reinforcement bolt
Front fender rear reinforcement bolt nut
Front fender stirrup—left
Tire to dash brace assembly
Tire to dash brace check nut
Tire to dash brace rubber ferrule
Spare tire to dash bracket
Spare tire to dash bracket screw
Spare tire to dash bracket screw nut
Spare tire clamp
Spare tire clamp bolt
Spare tire clamp bolt tee nut
Spare tire strap assembly
Tire cover (Landau Sedan)
Tire cover (Victoria)
Spare tire lock
Spare tire lock key
1
1
2
2
1
1
1
1
1
3
3
1
1
1
1
1
1
1
1
BONNET
...
...
...
...
...
A 81131
BO 80345
BZ 70336
BO 25802
BZ 70336
BONNET COMPLETE (Specify color or prime coat)
Handle
Handle rivet—tubular
Bonnet lock catch
Lock catch rivet—tubular
7/32'x1/4"
7/32x1/4"
1
2
4
4
12
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 41
BONNET LOCK ASSEMBLY
Illus.
No.
...
...
...
Part
No. Description Specifications
BO 80343
GO 18342
BZ 12799
BONNET LOCK ASSEMBLY
Machine screw
Nut
No.
Req.
4
8
8
HEAD LAMP TIE BAR
...
...
...
...
...
...
...
...
...
CZ 81559
BZ 81557
BZ 81558
BO 70011
BY 551
BM 304
BZ 81567
BZ 12799
BO 70227
Head lamp tie bar
Head lamp bracket—R. H.
Head lamp bracket—L. H.
Bolt
Nut
Bolt
License bracket
Nut
Screw
7/16"-14x1-3/4"
7/165-14x7/16"
3/8"-16x1"
No. 10-32x1/8"
No. 10-32x1-3/16"
1
1
1
2
1
2
2
2
2
SIDE LAMP BRACKET
...
...
...
...
...
...
...
BO 81566
BO 81562
BO 81563
BO 70185
BO 12120
BO 70502
BO 79786
SIDE LAMP BAND
Side lamp bracket—R. H..
Side lamp bracket—L. H,
Bolt—band to cowl
Nut—band to cowl bolt
Acorn nut—side lamp bracket
Leather washer—side lamp band
1
1
1
14
14
2
16
HEAD LAMP
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
BO 31247
BO 30778
BO 70513
BO 31252
BO 31292
BO 31295
BO 30060
BO 30913
BO 30440
BO 30365
BO 30443
BO 31279
BO 70353
BO 30370
BO 30357
BO 30439
BO 30369
BO 30373
BO 30358
BO 30374
BO 30351
BO 30350
BO 30348
BO 70349
HEAD LAMP COMPLETE
Spacer—lamp to bracket
Washer—lamp to bracket
Nut—lamp to bracket
DOOR ASSEMBLY (less lens)
Screw—door
Retainer—door screw
Lens
Gasket—lens
Spring—lens
REFLECTOR ASSEMBLY
CONNECTOR WIRES AND SOCKET ASSEMBLY
Focus screw
Packing—focus screw
Packing washer—focus screw
Spring—focus screw
Cam—focus screw
Cam pin (slotted head)
Spring—cam pin
Arm—cam
Terminal socket sleeve
Terminal socket
CONDUIT AND CAP ASSEMBLY
Nut—conduit to radiator
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SIDE LAMPS
...
...
...
...
...
...
...
...
...
...
BO 31248
BO 31249
BO 31301
BO 30659
BO 70422
BO 30425
BO 30406
BO 31302
BO 30423
BO 31397
SIDE LAMP COMPLETE—R. H.
SIDE LAMP COMPLETE—L. H.
SIDE LAMP DOOR ASSEMBLY (less lens)
Lens
Screw—door
Gasket—lens
Spring—lens
Conduit—wire
REFLECTOR ASSEMBLY
WIRE ASSEMBLY
1
1
2
2
2
2
4
2
2
2
STOP AND TAIL LAMP
...
...
...
...
...
...
BZ 31250
BZ 70313
BZ 30136
BZ 31306
BZ 30379
BZ 70365
STOP AND TAIL LAMP ASSEMBLY
Nut
Terminal complete
Door
Door glass (red)
Screw (door)
1/4"-20x3/16"
1
2
1
1
1
2
When ordering give letter prefix with symbol numbers - Example: CX 28960

42 HUDSON SUPER-SIX PARTS L;IST
STOP AND TAIL LAMP (Continued)
Illus.
No.
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
BZ 30378 Door glass gasket 1
BZ 30376
BZ 30381
License lens
License lens gasket
1
1
BZ 70001
BZ 28068
Bulb
Stop light switch
6-8 V.-15 C.P. 1
1
BZ 28084 Stop light switch bracket 1
BO 12126 Stop light switch to bracket screw No.10-32x5/8" 2
BZ 12799 Stop light switch to bracket screw nut No. 10-32x1/8 2
BZ 908
BZ 122
Stop light switch bracket to frame bolt 5/16"-18x3/8"
Stop light switch bracket to frame bolt nut 5/16"-18x5/16"
1
1
BZ 31011
BZ 28072
Stop light switch spring
Stop light switch spring clip
1
1
BZ 18069
BZ 12799
Stop light switch spring clip screw
Stop light switch spring clip screw nut
No. 10-32x3/4"
No. 10-32x%"
1
1
COWL VENTILATOR
CO 81415
BO 81623
COVER ASSEMBLY
Cover hinge adjusting plate
1
2
BO 18464 Cover hinge adjusting plate screw 4
BO 12120 Cover hinge adjusting plate screw nut 4
BO 70519 Cover hinge adjusting plate rivet 2
BO 81628
BO 81629
Cover hinge R. H.—on cowl
Cover hinge L. H.—on cowl
1
1
BO 18419
BO 81644
Cover hinge rivet
Cover to instrument panel spring
4
2
BO 82524 Cover to instrument panel spring clip 2
BO 18453 Cover to instrument panel spring clip screw 2
BO 12120 Cover to instrument panel spring clip nut 2
BO 81636
BO 70028
Control bracket
Control bracket rivet
1
3
BO 81641
BO 81669
Drain pipe
Drain tube
1
1
BO 81675 Drain tube clip 3
BO 18459 Drain tube clip screw 3
BO 18479 Drain tube clip screw nut 3
BO 81667
BO 81645
Ventilator handle
Ventilator handle spring
1
1
BO 70499 Ventilator handle clevis pin 1
INSTRUMENTS AND MOUNTING
BO 29129 OIL PRESSURE GAUGE ASSEMBLY 1
BO 70124
BO 29130
Screw
AMMETER ASSEMBLY
No. 8-32x3/16" Rd. Hd. 2
1
BO 70124
BO 81812
Screw
MOTOR TEMPERATURE INDICATOR ASSEMBLY
No. 8-32x3/16" Rd. Hd. 2
1
BO 70124 Screw No. 8-32x3/16" Rd. Hd. 2
BO 81811 GASOLINE AND OIL LEVEL GAUGE ASSEMBLY 1
BO 70124 Screw No. 8-32x3/16' Rd. Hd. 2
BO 81817
BO 81815
SELECTOR SWITCH ASSEMBLY—gas and oil
INSTRUMENT LAMP AND SOCKET ASSEMBLY 6-8 V.-3 C. P. bulbs
1
1
BO 79601
BO 79602
Anchor clip—upper
Anchor clip—lower
3
3
BO 70398 Clinch nut 1/4"-20 6
BO 81826 INSTRUMENT FRAME AND MOUNTING ASSEMBLY
(Coach, Sedan, Coupe, Phaeton, Roadster) 1
BO 81830 INSTRUMENT FRAME AND MOUNTING ASSEMBLY
(Landau Sedan, Town Sedan and Victoria) 1
BO 18453 Screw—attaching 1/4"-20 5
BO 18461 Shakeproof lockwasher 5
BO 81819 Instrument panel escutcheon plate (Coach, Sedan,
BO 81820
Coupe, Phaeton, Roadster)
Instrument panel escutcheon plate (Landau Sedan,
1
BO 81841
Victoria, Town Sedan)
Dial—instrument frame
1
1
BO 81843 Rim—instrument frame (Coach, Sedan, Coupe,
BO 81844
No.
Req.
Phaeton, Roadster)
Rim—instrument frame (Landau Sedan, Victoria,
1
Town Sedan) 1
BO 81846 Base—instrument frame 1
BO 79758 Glass—instrument frame 1
ACCESSORIES
The following units are considered accessories and are serviced by the manufacturers.
Parts and complete assemblies should be obtained direct from them or one of their dealers.
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 43
AIR CLEANER
AC Spark Plug Co., Flint, Michigan
BATTERY
The Electric Storage Battery,, Philadelphia, Pa.
ELECTRICAL EQUIPMENT
Starting Motor, Generator, Distributor and Ignition Coil—The Electric Auto-Lite Co., Toledo, Ohio
SPEEDOMETER
Stewart-Warner Speedometer Corp., Chicago, Ill.
VACUUM TANK
Stewart-Warner Speedometer Corp., Chicago, Ill.
WINDSHIELD CLEANER
Trico Products Corp., Buffalo, N. Y.
Illus.
No.
1
2
3
4
5
6
7
...
8
8
9
10
11
12
13
14
15
16
...
17
18
19
20
21
22
...
23
24
25
26
27
28
29
30
31
32
...
WIRING
Part
No. Description Specifications
BO 30584
BO 30585
BO 31416
BO 29826
BO 28074
BO 29825
BO 81815
BO 31416
BO 82080
BO 82081
BO 79359
BO 80037
BO 31418
BO 31424
BO 31428
BO 27811
BO 31406
BO 31404
BO 31406
BO 31412
BO 31414
BO 31426
BO 31422
BO 30823
B0 30098
BM 30099
BM 29932
BM 29986
BM 29987
BM 29988
BM 29989
BM 29990
EM 29991
BZ 60648
BZ 29836
BZ 31419
BZ 18069
Head lamp wire assembly—head lamp to main
switCh—R. H.
Head lamP wire assembly—head lamp to main
switch—L. H.
Side lamp wire assembly—junction post to switch
Stop light wire assembly—stop light switch to stop
light
Stop light wire assembly—stop light switch to main
switch
Tail lamp wire assembly—tail lamp to main switch
Instrument lamp wire assembly—instrument lamp
to junction post
Instrument lamp wire assembly—junction post to
main switch
Dome lamp wire assembly—dome lamp to junction
post (Coach, Sedan)
Dome lamp wire assembly—dome lamp to junction
post (Coupe)
Dome lamp wire assembly—dome lamp to dome
lamp switch
Dome lamp wire assembly—dome lamp .switch to
ground
Feed wire assembly—main switch to junction block
Feed wire assembly—ammeter to junction block
Feed wire assembly—generator to ammeter
Feed wire assembly—starter post to ammeter
Ignition wire assembly—ammeter to Electrolock
Ignition wire assembly—Electrolock to coil
Gasoline and oil gauge wire assembly—Electrolock
to gauge
Gasoline and oil gauge wire assembly—oil pan unit
to junction post
Gasoline and oil gauge wire assembly—junction
block to gauge switch
Gasoline and oil gauge wire assembly—gasoline
tank unit to junction block
Horn wire assembly—horn to junction block
Horn wire assembly—horn to horn button
Coil wire assembly—coil to distributor—high tension
CABLE TUBE AND WIRES ASSEMBLY (spark plug)
Cable tube
Cable No. 1
Cable No. 2
Cable No. 3
Cable No. 4
Cable No. 5
Cable No. 6
BATTERY GROUND CONNECTION
BATTERY CABLE AND CONDUIT ASSEMBLY (battery
to starter,
Clip—battery to starter cable
Screw—battery to starter cable clip No. 10-32x3/4”
No.
Req.
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
When ordering give letter prefix with symbol numbers - Example: CX 28960

44 HUDSON SUPER-SIX PARTS L;IST
WIRING (Continued)
Illus.
No.
...
33
...
34
35
36
37
38
39
40
41
...
...
42
43
44
45
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
BZ 12799
BM 219
BZ 122
BZ 12843
BZ 12844
BO 29446
GO 13733
GZ 3613
BO 30348
BO 70349
BZ 30307
BO 12126
BZ 12799
BZ 81817
BZ 30308
BZ 70552
BZ 70553
CZ 31546
CZ 31547
BZ 30794
BZ 29178
BZ 29179
BZ 63425
BZ 28620
BM 22594
BM 23692
BM 8672
BZ 31149
BM 23389
BZ 28333
BZ 31356
BZ 31357
BZ 31361
BO 81983
BO 81987
BO 81985
BO 81989
BO 81990
BO 81992
BZ 31214
BZ 30734
BO 31239
BZ 31240
BZ 31487
BZ 70553
BZ 70563
BZ 70551
BZ 70550
BZ 30780
BZ 30781
BM 13073
BZ 122
BZ 30902
BZ 30903
BZ 30904
Nut—battery to starter cable clip screw
Screw—battery ground connection
nut—battery ground connection screw
Screw—battery terminal
Nut—battery terminal screw
Clip—frame to tail, stop and gas gauge wires
Clip—frame to head and tail lamp wires
Rubber ferrule
Cable and conduit—head lamp
Nut—conduit to radiator
Junction post
Junction post screw
Junction post screw nut
Gasoline and oil gauge switch
Lighting switch
Electrolock coil wire screw
Electrolock gas and oil gauge wire screw
TOOLS
No. 10-32x1/2"
5/16”-18x3/4"
5/16"-18x5/16"
5/16"-18x1-1/4"
5/16"-18x1/4"
Tool box assembly (wire wheel and demountable at
hub wheels). (Includes all tools excepting alemite gun)
Tool box assembly (wood wheels, demountable
1
rim). (Includes all tools excepting alemite gun) 1
Starting crank and jack handle 1
Jack 1
Jack extension
Oil can
1
1
Oil can holder
Spark plug and main bearing nut wrench
1
1
Eccentric adjusting wrench 1
Water pump stuffing nut wrench 1
Hub cap wrench (demountable rim wheels only) 1
Tappet adjusting wrench
End wrench No. 25 special
1
1
Socket wrench assembly (includes pilots)
Socket wrench assembly (less pilots)
1
1
Socket wrench pilot 2
FLOOR MATS AND PADS
Front floor mat and pad assembly (Coach) 4
Front floor mat and pad assembly (Landau Sedan) 1
Front floor mat and pad assembly (Sedan, Coupe) 1
Front floor mat and pad assembly (Victoria) 1
Front floor mat and pad assembly (Town Sedan) 1
Front mat and pad assembly (Roadster and
Phaeton)
ELECTROLOCK
ELECTROLOCK ASSEMBLY
Nut—Electrolock to instrument board
Electrolock cylinder
Key
Electrolock post
Screw—oil control switch connection
Shakeproof lockwasher—oil control switch connection
Screw—coil connection
Shakeproof lockwasher—coil connection
HORN
NOTE: The horn assembly and the bracket are serviced by the Hudson
Motor Car Co. All other parts are furnished by the E-A Laboratories
Co., Brooklyn, N. Y.
HORN AND BRACKET ASSEMBLY
Bracket
Bracket stud
5/16"-18x1-1/4"
Bracket stud nut
5/16"-18x5/16"
SHOCK ABSORBERS
Shock absorber unit assembly—front R. H.
Shock absorber unit assembly—front L. H
Shock absorber unit assenbly rear R. H
No.
Req.
2
1
1
2
2
2
2
4
2
2
1
2
2
1
1
2
1
1
1
1
1
1
1
1
2
2
1
1
2
2
1
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960

Wiring Diagram
45

46 HUDSON SUPER-SIX PARTS LIST
SHOCK ABSORBERS (Continued)
Illus.
No.
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Part
No. Description Specifications
BZ 30905
BZ 31818
BZ 31819
BZ 31822
BZ 31823
BZ 31824
BZ 31825
BZ 31826
BZ 30906
BZ 30909
BZ 30910
BZ 31830
BZ 31831
BZ 31832
BZ 31833
BZ 31834
BZ 31835
BZ 31836
BZ 31837
BZ 31838
BZ 31839
BZ 31861
BZ 31850
BZ 31840
BZ 31841
BZ 31842
BZ 31843
BZ 31859
BZ 31860
BZ 31861
BZ 31862
BZ 31863
BZ 31864
BZ 31844
BZ 31845
BZ 31846
BZ 31847
Shock absorber unit assembly—rear L. H.
Shock absorber arm—front unit—R. H.
Shock absorber arm—rear unit
Shock absorber tie rod—front unit
Shock absorber tie rod—rear unit
Shock absorber tie rod flexible joint—large—rubber
Shock absorber tie rod flexible joint—small—rubber
Shock absorber tie rod flexible joint washer
Shock absorber tie rod anchor—front to axle
Shock absorber tie rod anchor—rear to axle—R. H.
Shock absorber tie rod anchor—rear to axle—L. H.
Shock absorber cover
Shock absorber cover cap screw
Shock absorber shaft and lever
Shock absorber shaft end play spring
Shock absorber shaft oil seal
Shock absorber shaft oil seal retainer
Shock absorber shaft bushing
Shock absorber piston assembly—front
Shock absorber piston assembly—rear
Shock absorber piston spring
Shock absorber cylinder end plug
Shock absorber cylinder end plug gasket
Shock absorber throttle valve adjusting screw
Shock absorber throttle valve adjusting screw lock
nut
Shock absorber throttle valve cap
Shock absorber throttle valve cap gasket
Shock absorber arm—front unit—L. H.
Shock absorber cover gasket
Shock absorber filler plug
Shock absorber filler plug gasket
Shock absorber shaft thrust washer
Shock absorber shaft nut
Shock absorber relief valve steel ball
Shock absorber relief valve steel disc
Shock absorber relief valve spring
Shock absorber relief valve cap
No.
Req.
1
1
2
2
2
4
4
16
2114
12
44444224888
4
481111142222
TRUNK RACK
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
CZ 81895
CZ 81918
BZ 81694
BZ 81695
BR 1308
BO 70047
BZ 70507
BM 108
BZ 81696_
BZ 70527
BO 70047
BZ 81697
BZ 549
BZ 70508
BZ 82431
Trunk rack complete
Trunk rack frame and supports assembly
Trunk rack support
Trunk rack support bracket
Trunk rack support bracket bolt
Trunk rack support bracket bolt nut
Trunk rack support bolt
Trunk rack support bolt nut
Trunk rack support loop
Trunk rack support loop bolt
Trunk rack support loop bolt nut
Trunk rack clevis
Trunk rack clevis pin
Trunk rack clevis bolt
Trunk bracket (Victoria)
1
1
2
2
2
2
2
2
2
4
4
2
2
2
2
...
...
...
...
...
...
...
...
...
...
...
...
...
BZ 81835
BZ 70381
BZ 122
BZ 81836
BZ 70238
BZ 9666
BZ 81698
BO 2936
BZ 79791
BO 70047
BZ 80292
BZ 636
BZ 30003
RUMBLE SEAT STEPS
Upper step 1
Screw
Nut
F H.-5/16"-18x1-3/4"
5/16"-18x5/16"
1
3
Lower step 1
Screw F H.—3/8"-16x1-13/16" 1
Nut 3/8"-16 1
Lower step bracket
Bolt
3/8"-16x1-3/4" 1
1
Washer—step bolt angle
Nut 3/8”-16
2
2
Lower step arm 1
Key Woodruff No. 11 1
Lower step arm nut 1
When ordering give letter prefix with symbol numbers - Example: CX 28960

HUDSON SUPER-SIX PARTS LIST 47
Illus.
No.
...
...
...
FRONT AXLE - R. H. DRIVE
Part
No. Description Specifications
CX 31094
BX 28968
BZ 31208
FRONT AXLE ASSEMBLY
Steering arm—L. H.
Steering arm—R. H.
FRAME - R. H. DRIVE
... CF 31025 SIDE MEMBER ASSEMBLY—R. H. 1
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
CT 31231
CT 31229
GT 31087
BT 31137
BT 31144
CZ 31650
CZ 30494
CZ 31652
BZ 31654
BZ 31674
BZ 31662
BZ 63385
BZ 29773
BZ 31665
BZ 31667
BZ 31657
BZ 31658
BZ 29782
BZ 29785
BZ 29784
BZ 31671
CZ 30787
BZ 30666
BZ 30529
BZ 30530
BZ 30537
BZ 30536
BZ 29728
BZ 30819
BZ 30533
BZ 30534
BZ 30453
BZ 26157
BZ 10149
BZ 30822
CZ 31211
CZ 31213
BZ 29465
BM 794
BZ 12799
BZ 70150
BZ 29463
BM 794
BZ 13578
BZ 29461
BZ 29160
BZ 13579
BZ 13542
BZ 29812
BZ 7911
BZ 31084
BZ 30191
BZ 25364
TRANSMISSION - R. H. DRIVE
TRANSMISSION ASSEMBLY
TRANSMISSION ASSEMBLY
Transmission case
Front bearing cap
CLUTCH THROWOUT YOKE ASSEMBLY
STEERING GEAR - R. H. DRIVE
4-1/13 to 1 R. A. ratio
4-5/12 to 1 R. A. ratio
No.
Req.
STEERING GEAR COMPLETE
CONTROL ASSEMBLY
1
1
CASE AND GEARS COMPLETE
CASE ASSEMBLY
1
1
Oil retainer—lower control bracket 1
Case cover 1
Gasket—case cover 1
Bracket—frame
Main column tube
1
1
Worm
Adjusting sleeve assembly (Includes cups)
1
1
Roller tooth and shaft assembly 1
Bushing—roller tooth and shaft 2
Thrust washer—roller tooth shaft 1
Screw—roller tooth adjusting
Arm—roller tooth shaft (steering)
1
1
Jacket tube and bushing assembly
Bushing—jacket tube
1
1
Stationary tube assembly 1
Throttle tube assembly 1
Spark tube assembly 1
Spark lever—upper
Spark tube pinion
1
1
Insulator washer—lower
Horn button contact cup
2
1
Horn button 1
Spark and throttle control name plate 1
Horn button lock ring 1
Horn button spring
Horn wire assembly
1
I
DRAG LINK ASSEMBLY
Drag link
DRAG LINK - R. H. DRIVE
SPARK AND THROTTLE CONTROL R. H. DRIVE
SPARK CONTROL
Steering gear to distributor rod
Nut
Nut
Ball joint
THROTTLE CONTROL
Steering gear to carburetor rod
Nut
Yoke
Collar
Trunnion
Clevis pin
Spring
ACCELERATOR
Pedal
Pedal taper pin
Shaft
Spring
Lever—short
1/4"-28x7/32"
No. 10-32x1/8"
No. 10-32 special
1/4"-38x7/32"
3/16"x1-1/16"
No. 00x1/4"
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960

48 HUDSON SUPER-SIX PARTS LIST
SPARK AND THROTTLE CONTROL - R. H. DRIVE (Continued)
Illus.
No.
Part
No. Description Specifications
No.
Req.
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
BZ 60574
BZ 7911
BZ 29455
BZ 5771
BZ 12799
BZ 5825
GS 29066
BS 29068
GZ 31030
GZ 31034
BX 18341
BZ 5402
BZ 1015
BZ 115
GZ 31160
BZ 1015
BZ 115
BZ 25447
GZ 31033
GZ 31041
GZ 31043
BR 1308
GZ 9836
GZ 24888
BZ 29544
BZ 62
BY 3212
BZ 29540
BY 3212
BZ 31195
BZ 31193
BZ 31194
BZ 31197
BZ 31199
BO 81984
BO 81988
BO 81986
BO 81991
BO 81993
Lever—long
Lever taper pin
Pedal to carburetor rod
No. 00x3/4"
Pedal to carburetor rod yoke
Pedal to carburetor rod nut
3/16"-32
No. 10-32x1/8"
Pedal to carburetor rod clevis pin 3/16"x11/16"
HAND BRAKE LEVER - R. H. DRIVE
HAND BRAKE LEVER ASSEMBLY
Hand brake lever
PEDAL CONTROL - R. H. DRIVE
PEDAL CONTROL ASSEMBLY 1
Brake pedal assembly 1
Brake pedal set screw 3/8"-16x1-1/2" 1
Brake pedal set screw nut
Brake pedal taper pin
3/8"-16x3/16"
No. 2x1-1/4"
1
1
Brake pedal key
Brake pedal lever
Woodruff No. 9 1
1
Brake pedal lever taper pin No. 2x1-1/4" 1
Brake pedal lever key Woodruff No. 9 1
Brake pedal bushing 1
Clutch pedal assembly
Pedal shaft
1
1
Bracket
Bracket bolt 3/8-16x1-1/8"
1
1
Bracket bolt 3/8"-16x1" 3
Bracket bushing 1
Clutch pedal link 1
Clutch pedal link nut
Clutch pedal link clevis pin
3/8"-24
3/8"x1-3/32"
1
1
Clutch pedal adjustable link
Clutch pedal adjustable link clevis pin 3/8"x1-3/32"
1
1
BRAKE CONTROL
(R. H. D. parts that are different from L. H. D.)
BRAKE CROSS SHAFT BEARING PLATE ASSEM-
BLY—front center
Brake cross shaft—front
Brake cross shaft—rear
Brake cross shaft to pedal lever
Brake rod—pedal to brake cross shaft
RUBBER MATS AND FELT PADS - R. H. DRIVE
FRONT MAT AND PAD ASSEMBLY (Coach)
FRONT MAT AND PAD ASSEMBLY (5-Pass. Landau Sedan)
FRONT MAT AND PAD ASSEMBLY (Sedan, Coupe)
FRONT MAT AND PAD ASSEMBLY (Town Sedan)
FRONT MAT AND PAD ASSEMBLY (Roadster, Phaeton)
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
When ordering give letter prefix with symbol numbers - Example: CX 28960