Owner's Manual Cadillac BLS - IFS Europe BV

460_OM_MY09.book Page 85 Wednesday, April 2, 2008 10:32 AM
Instruments and controls
85
Adjusting sensitivity
The sensitivity of the rain sensor can be
adjusted in Settings. If you increase the
sensitivity, the wipers will make one sweep
for reference.
1Select Settings using the steering
wheel buttons, or .
2 Hold the SET button depressed until a
chime sounds.
3Select Rain Sensor using the steering
wheel buttons, or .
4 Press the SET button.
5 Select sensitivity using the steering
wheel buttons, or .
6 Confirm this selection by pressing the
SET button.
Rain Sensor
HIGH
MEDIUM
LOW
Explanation of sensor sensitivity.
HIGH
The sensor is set to high sensitivity.
The wipers start when there is only a
small amount of water on the windscreen.
MEDIUM
The sensor has normal sensitivity.
LOW
The sensor is set to low sensitivity.
The sensitivity of the sensor is also affected
by the amount of daylight. The sensor is
somewhat more sensitive at night. This
adjustment is automatic.