Owner's Manual Cadillac BLS - IFS Europe BV

460_OM_MY09.book Page 225 Wednesday, April 2, 2008 10:32 AM
Car care
225
7 Connect the air hose from the canister to
the valve on the wheel.
8 The switch on the compressor must be
in the 0 position.
9 Connect the compressor’s electric cable
to the 12 volt socket (cigarette lighter) in
the car.
10 Start the compressor.
11 While the canister of sealant empties
(approx. 30 s), the gauge on the compressor
will briefly show a pressure of up
to 6 bar. The pressure will then drop.
12 Once the canister is empty, pump the
tyre to the recommended tyre pressure
(see page 245). It is not necessary to
remove the canister.
13 The tyre should be inflated to the recommended
pressure within 10 minutes.
Switch off the compressor once the
correct pressure is reached.
If the correct pressure is not reached within
10 minutes, the damage to the tyre is too
large to be repaired with the sealant.
Park the car in a suitable place and call for
assistance.
If the tyre pressure becomes too high, it can
be reduced by pressing the button by the
pressure gauge on the compressor.
Do not run the compressor for more than
10 minutes.