Owner's Manual Cadillac BLS - IFS Europe BV

460_OM_MY09.book Page 198 Wednesday, April 2, 2008 10:32 AM
198 Car care
Brake lights, tail lights and
direction indicators
Sedan: If a brake light bulb fails, for reasons
of safety the adjacent tail light will serve as
a brake light. Replace the defective bulb as
soon as possible.
1 Lower the cover in the trim behind the
lights.
Right-hand side: Unlock the plastic
rivet by depressing the centre no more
than 3 mm. Take hold of the collar of the
rivet and pull it out. See also page 198.
2 Twist the bulb holder anticlockwise and
take it out.
3 Fit the new bulb.
Reversing lights and rear fog
light, Sedan
Removing the boot lid trim
1 Remove the two screws securing the
grab handle to the inside of the boot lid.
2 Unlock the plastic rivets by pressing in
the centre of each rivet no more than
3 mm. Pull out the rivets by taking hold
of the rivet’s collar.
You can use the button on the handle of the
screwdriver supplied with the car to unlock
the rivets.