02.07.2014 Views

Owner's Manual Cadillac BLS - IFS Europe BV

Owner's Manual Cadillac BLS - IFS Europe BV

Owner's Manual Cadillac BLS - IFS Europe BV

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

460_OM_MY09.book Page 19 Wednesday, April 2, 2008 10:32 AM<br />

Safety<br />

19<br />

Raise the belt guide by pushing it upwards<br />

to the desired position. To lower it, depress<br />

the catch release button while lowering the<br />

guide. Check that the guide locks in its new<br />

position.<br />

Expectant mothers<br />

Expectant mothers should position the belt<br />

in such a way that it never exerts pressure<br />

on the stomach. The hip strap should be<br />

placed as low as possible across the hips.<br />

Seat belt pretensioners<br />

WARNING<br />

If the car is involved in a collision, the seat<br />

belts, seat belt pretensioners and other<br />

components must be inspected at a workshop.<br />

We recommend that you contact an<br />

authorised <strong>Cadillac</strong> workshop.<br />

Never make any alterations or repairs to<br />

the seat belts yourself. We recommend<br />

that you contact an authorised <strong>Cadillac</strong><br />

workshop.<br />

The seat belts of the front seats have pretensioners<br />

and force limiters. These are<br />

deployed in the event of a severe head-on<br />

collision or in a side-on collision. The seat<br />

belt pretensioners are only deployed if the<br />

seat belt is buckled.<br />

The seat belt pretensioners are not activated<br />

should the car roll over.<br />

The seat belt pretensioners serve to reduce<br />

the forward movement of the body by tensioning<br />

the belt. The force limiters reduce<br />

belt loads on the body by "slackening" the<br />

seat belt slightly to absorb the body’s kinetic<br />

energy as gradually as possible.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!