Owner's Manual Cadillac BLS - IFS Europe BV

460_OM_MY09.book Page 151 Wednesday, April 2, 2008 10:32 AM
Starting and driving
151
StabiliTrak ® OFF
in the main instrument panel illuminates
when
• the system has been switched off manually,
speed must be below 60 km/h.
• a fault has arisen in the ABS/StabiliTrak ®
system.
• there is a fault in the system, and at the
same time the following message is
shown on the DIC:
Stability control failure.
Contact service.
Turning the StabiliTrak ® system
off temporarily
The StabiliTrak ® system is switched on
automatically when the engine is started.
It may be necessary to switch off the system
if the car has become bogged down, for
instance.
The StabiliTrak ® system is always active
during braking, even if it has been switched
off, but if a fault arises in the ABS/StabiliTrak
® system the StabiliTrak ® system is
disengaged.
The cruise control system 3 is disengaged
when theStabiliTrak ®® system is operative.
NOTICE
Chassis modifications, such as change of
wheels, bumper or suspension, could
affect the function of the StabiliTrak ®
system.
We recommend that you contact an
authorised Cadillac workshop before
replacing chassis components.
Disengage the system in Settings.
1Select Settings using the steering
wheel buttons, or .
2 Hold the SET button depressed until a
chime sounds.
3Select ESP (StabiliTrak ® ).
4 Press the SET button.
5Select ON or OFF.
End by pressing the SET button.
Go back/undo using the CLR button.