02.07.2014 Views

Owner's Manual Cadillac BLS - IFS Europe BV

Owner's Manual Cadillac BLS - IFS Europe BV

Owner's Manual Cadillac BLS - IFS Europe BV

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

460_OM_MY09.book Page 145 Wednesday, April 2, 2008 10:32 AM<br />

Cruise control switches<br />

The system has the following functions:<br />

1 ON: engaged<br />

2 OFF: disengaged<br />

3 SET/+: sets the speed and increases<br />

the set speed<br />

4 SET/–: sets the speed and decreases<br />

the set speed<br />

5 RESUME: re-engages the system at the<br />

set speed<br />

The indicator light in the main instrument<br />

panel comes on when the switch is slid<br />

to ON. If you switch off the engine while the<br />

cruise control is ON, the system will be ON<br />

the next time the engine is started.<br />

To set the speed<br />

1 Slide the switch to ON.<br />

2 Jog the control to SET/+ or SET/– when<br />

the car has reached the desired speed<br />

(above 15 mph (25 km/h)).<br />

To increase the preset speed<br />

You can increase the speed in any of the following<br />

ways:<br />

• Accelerate to the desired speed. Jog the<br />

control to SET/+ or SET/–.<br />

• Jog the control to SET/+ to increase the<br />

speed by 1 mph (1.6 km/h) (when cruise<br />

control already engaged).<br />

• Hold the control in the SET/+ position until<br />

the desired speed is reached (when<br />

cruise control already engaged).<br />

To reduce the preset speed<br />

You can reduce speed in any of the following<br />

ways:<br />

• Brake to the desired speed. Jog the control<br />

to SET/+ or SET/–.<br />

• Jog the control to SET/– to reduce the<br />

speed by 1 mph (1.6 km/h).<br />

• Hold the control in the SET/– position until<br />

the desired speed is reached.<br />

Starting and driving<br />

145<br />

Temporary increase in speed<br />

Accelerate, without shifting down (manual<br />

gearbox), to exceed the set speed such as<br />

for overtaking. When you release the accelerator,<br />

the car will return to the set speed.<br />

To disengage the system<br />

temporarily<br />

Slide the switch to the left towards OFF, but<br />

only as far as to disengage the cruise control.<br />

Allow the switch to spring back.<br />

To re-engage the system<br />

Slide the switch to RESUME. The car will<br />

return to the previously set speed. Vehicle<br />

speed must exceed 15 mph (25 km/h).<br />

To disengage the system<br />

The system will be disengaged:<br />

• When you depress the brake or clutch<br />

pedal (cars with manual gearbox).<br />

• When the switch is slid to To disengage<br />

the system temporarily.<br />

• When the switch is slid to OFF.<br />

• When the TCS/StabiliTrak ® regulates<br />

• When position N is selected (cars with<br />

automatic transmission).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!