Table of Contents Cadillac Escalade - IFS Europe BV
Table of Contents Cadillac Escalade - IFS Europe BV Table of Contents Cadillac Escalade - IFS Europe BV
AKENG44_Escalade Page 96 Wednesday, July 16, 2008 12:22 PM Instrumentation and Controls A AUTO Air Outlet Selector Press the up or down arrow on switch to stop the automatic operation and to manually select one of the modes controlling the direction of airflow. The display shows the selected mode. If this control is pressed while the system is in automatic mode, AUTO will disappear from the display. E B G AUX F C The system will continue to control the fan speed automatically. Pressing when the system is off will change the air delivery mode without turning the system on. Whenever the system is turned off, the display goes blank after displaying the current setting. This mode directs airflow through the instrument panel outlets. D The blending mode directs airflow through both the instrument panel outlets and the floor outlets. Some air may go to the windshield and side window vents. The air coming from the floor outlets may be slightly warmed. The heater mode directs most of the airflow through the floor outlets, with some air going to the windshield and side window defroster vents. Use this mode to direct air to the rear of the vehicle. The recirculation function cannot be activated in this mode. . . . 96
AKENG44_Escalade Page 97 Wednesday, July 16, 2008 12:22 PM Section 1 This mode divides airflow between the windshield defroster vents, the floor outlets and the side window defroster vents. Use this mode to remove fog from the windshield or side windows while also heating the vehicle. The A/C compressor will automatically operate in this mode if the temperature is above 4°C (40°F). The recirculation function cannot be activated in this mode. Do not drive the vehicle unless all windows are clear of fog, snow, ice or anything else that may obstruct your vision. Defrosting Press to get fog or ice off the windshield and side windows. This mode divides airflow between the windshield defroster vents, the floor outlets and the side window defroster vents. The A/C compressor will automatically operate in this mode if the temperature is above 4°C (40°F). The recirculation function cannot be activated in this mode. Do not drive the vehicle unless all windows are clear of fog, snow, ice or anything else that may obstruct your vision. Recirculation Press the recirculation button to recirculate the air in your vehicle. This is useful for keeping dust and odors out or when quick cooling is desired. The recirculation symbol will appear on the display when this feature is active. The A/C compressor comes on while the system is in the recirculation mode. Press the button again or turn off the ignition to stop the recirculation function. The recirculation function cannot be activated in a heating, defogging or defrosting mode. – 97 . . .
- Page 45 and 46: AKENG44_Escalade Page 45 Wednesday,
- Page 47 and 48: AKENG44_Escalade Page 47 Wednesday,
- Page 49 and 50: AKENG44_Escalade Page 49 Wednesday,
- Page 51 and 52: AKENG44_Escalade Page 51 Wednesday,
- Page 53 and 54: AKENG44_Escalade Page 53 Wednesday,
- Page 55 and 56: AKENG44_Escalade Page 55 Wednesday,
- Page 57 and 58: AKENG44_Escalade Page 57 Wednesday,
- Page 59 and 60: AKENG44_Escalade Page 59 Wednesday,
- Page 61 and 62: AKENG44_Escalade Page 61 Wednesday,
- Page 63 and 64: AKENG44_Escalade Page 63 Wednesday,
- Page 65 and 66: AKENG44_Escalade Page 65 Wednesday,
- Page 67 and 68: AKENG44_Escalade Page 67 Wednesday,
- Page 69 and 70: AKENG44_Escalade Page 69 Wednesday,
- Page 71 and 72: AKENG44_Escalade Page 71 Wednesday,
- Page 73 and 74: AKENG44_Escalade Page 73 Wednesday,
- Page 75 and 76: AKENG44_Escalade Page 75 Wednesday,
- Page 77 and 78: AKENG44_Escalade Page 77 Wednesday,
- Page 79 and 80: AKENG44_Escalade Page 79 Wednesday,
- Page 81 and 82: AKENG44_Escalade Page 81 Wednesday,
- Page 83 and 84: AKENG44_Escalade Page 83 Wednesday,
- Page 85 and 86: AKENG44_Escalade Page 85 Wednesday,
- Page 87 and 88: AKENG44_Escalade Page 87 Wednesday,
- Page 89 and 90: AKENG44_Escalade Page 89 Wednesday,
- Page 91 and 92: AKENG44_Escalade Page 91 Wednesday,
- Page 93 and 94: AKENG44_Escalade Page 93 Wednesday,
- Page 95: AKENG44_Escalade Page 95 Wednesday,
- Page 99 and 100: AKENG44_Escalade Page 99 Wednesday,
- Page 101 and 102: AKENG44_Escalade Page 101 Wednesday
- Page 103 and 104: AKENG44_Escalade Page 103 Wednesday
- Page 105 and 106: AKENG44_Escalade Page 105 Wednesday
- Page 107 and 108: AKENG44_Escalade Page 107 Wednesday
- Page 109 and 110: AKENG44_Escalade Page 109 Wednesday
- Page 111 and 112: RPM x 1000 ABS km/h MPH AKENG44_Esc
- Page 113 and 114: AKENG44_Escalade Page 113 Wednesday
- Page 115 and 116: AKENG44_Escalade Page 115 Wednesday
- Page 117 and 118: AKENG44_Escalade Page 117 Wednesday
- Page 119 and 120: AKENG44_Escalade Page 119 Wednesday
- Page 121 and 122: AKENG44_Escalade Page 121 Wednesday
- Page 123 and 124: AKENG44_Escalade Page 123 Wednesday
- Page 125 and 126: AKENG44_Escalade Page 125 Wednesday
- Page 127 and 128: AKENG44_Escalade Page 127 Wednesday
- Page 129 and 130: AKENG44_Escalade Page 129 Wednesday
- Page 131 and 132: AKENG44_Escalade Page 131 Wednesday
- Page 133 and 134: AKENG44_Escalade Page 133 Wednesday
- Page 135 and 136: AKENG44_Escalade Page 135 Wednesday
- Page 137 and 138: AKENG44_Escalade Page 137 Wednesday
- Page 139 and 140: AKENG44_Escalade Page 139 Wednesday
- Page 141 and 142: AKENG44_Escalade Page 141 Wednesday
- Page 143 and 144: AKENG44_Escalade Page 143 Wednesday
- Page 145 and 146: AKENG44_Escalade Page 145 Wednesday
AKENG44_<strong>Escalade</strong> Page 96 Wednesday, July 16, 2008 12:22 PM<br />
Instrumentation and Controls<br />
A<br />
AUTO<br />
Air Outlet Selector<br />
Press the up or down arrow on<br />
switch to stop the automatic<br />
operation and to manually select<br />
one <strong>of</strong> the modes controlling the<br />
direction <strong>of</strong> airflow. The display<br />
shows the selected mode.<br />
If this control is pressed while the<br />
system is in automatic mode,<br />
AUTO will disappear from the<br />
display.<br />
E<br />
B<br />
G<br />
AUX<br />
F<br />
C<br />
The system will continue to<br />
control the fan speed automatically.<br />
Pressing when the system is <strong>of</strong>f<br />
will change the air delivery mode<br />
without turning the system on.<br />
Whenever the system is turned <strong>of</strong>f,<br />
the display goes blank after<br />
displaying the current setting.<br />
This mode directs airflow<br />
through the instrument<br />
panel outlets.<br />
D<br />
The blending mode directs<br />
airflow through both the<br />
instrument panel outlets<br />
and the floor outlets. Some<br />
air may go to the windshield<br />
and side window<br />
vents. The air coming from<br />
the floor outlets may be<br />
slightly warmed.<br />
The heater mode directs<br />
most <strong>of</strong> the airflow through<br />
the floor outlets, with some<br />
air going to the windshield<br />
and side window defroster<br />
vents.<br />
Use this mode to direct air<br />
to the rear <strong>of</strong> the vehicle.<br />
The recirculation function<br />
cannot be activated in this<br />
mode.<br />
. . . 96