Table of Contents Cadillac Escalade - IFS Europe BV

Table of Contents Cadillac Escalade - IFS Europe BV Table of Contents Cadillac Escalade - IFS Europe BV

02.07.2014 Views

AKENG44_Escalade Page 58 Wednesday, July 16, 2008 12:22 PM Instrumentation and Controls • APPROACH LIGHTING This feature allows you to program the exterior lights to turn on or remain off when you use the Remote Keyless Entry transmitter to unlock your vehicle while it is dark outside. Press the button to enter the submenu. While in this submenu, press the button repeatedly to scroll through the following options: - OFF The perimeter lights will not turn on when you unlock the vehicle using the remote keyless entry transmitter. -ON When the vehicle is unlocked using the Remote Keyless Entry transmitter, the exterior lights will also turn on. They will stay on for 20 seconds or until the ignition is turned on or the lock button on the transmitter is pressed. This is the default setting. - NO CHANGE Once the desired setting is displayed, press the button to select it. You may now either exit programming mode or program the next available feature. To exit programming mode, see "Exiting Programming Mode" later in this section. See "Remote Keyless Entry" in Section 3 for more information. • CHIME VOLUME This feature allows you to change the chime volume level. The chime cannot be turned off completely. The system has two chime volume levels, normal and loud. Press the button to enter the submenu. While in this submenu, press the button repeatedly to scroll through the following options: - NORMAL - LOUD - NO CHANGE . . . 58

AKENG44_Escalade Page 59 Wednesday, July 16, 2008 12:22 PM Section 1 Once the desired setting is displayed, press the button to select it. You may now either exit programming mode or program the next available feature. To exit programming mode, see "Exiting Programming Mode" later in this section. • PARK TILT MIRRORS With this feature turned on, the passenger's and/or driver's mirror will tilt down to a pre-programmed position, whenever the vehicle is shifted into R (Reverse) to allow you to view the curb while you parallel park. Press the button to enter the submenu. While in this submenu, press the button repeatedly to scroll through the following options: - OFF The outside mirrors do not tilt down when the vehicle is shifted into R (Reverse). This is the default setting. - DRIVER MIRROR The outside mirror on the driver's side of the vehicle will tilt down to a curb-view position when the vehicle is shifted into R (Reverse). -PASSENGER MIRROR The outside mirror on the passenger's side of the vehicle will tilt down to a curb-view position when the vehicle is shifted into R (Reverse). - BOTH MIRRORS Both outside mirrors will tilt down to a curb-view position when the vehicle is shifted into R (Reverse). - NO CHANGE – 59 . . .

AKENG44_<strong>Escalade</strong> Page 58 Wednesday, July 16, 2008 12:22 PM<br />

Instrumentation and Controls<br />

• APPROACH LIGHTING<br />

This feature allows you to<br />

program the exterior lights to<br />

turn on or remain <strong>of</strong>f when you<br />

use the Remote Keyless Entry<br />

transmitter to unlock your<br />

vehicle while it is dark outside.<br />

Press the button to enter the<br />

submenu.<br />

While in this submenu, press<br />

the button repeatedly to<br />

scroll through the following<br />

options:<br />

- OFF<br />

The perimeter lights will not<br />

turn on when you unlock the<br />

vehicle using the remote<br />

keyless entry transmitter.<br />

-ON<br />

When the vehicle is unlocked<br />

using the Remote Keyless<br />

Entry transmitter, the<br />

exterior lights will also turn<br />

on. They will stay on for<br />

20 seconds or until the<br />

ignition is turned on or the<br />

lock button on the transmitter<br />

is pressed.<br />

This is the default setting.<br />

- NO CHANGE<br />

Once the desired setting is<br />

displayed, press the button<br />

to select it.<br />

You may now either exit programming<br />

mode or program<br />

the next available feature.<br />

To exit programming mode,<br />

see "Exiting Programming<br />

Mode" later in this section.<br />

See "Remote Keyless Entry" in<br />

Section 3 for more information.<br />

• CHIME VOLUME<br />

This feature allows you to<br />

change the chime volume<br />

level. The chime cannot be<br />

turned <strong>of</strong>f completely.<br />

The system has two chime<br />

volume levels, normal and<br />

loud.<br />

Press the button to enter the<br />

submenu.<br />

While in this submenu, press<br />

the button repeatedly to<br />

scroll through the following<br />

options:<br />

- NORMAL<br />

- LOUD<br />

- NO CHANGE<br />

. . . 58

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!