Table of Contents Cadillac Escalade - IFS Europe BV

Table of Contents Cadillac Escalade - IFS Europe BV Table of Contents Cadillac Escalade - IFS Europe BV

02.07.2014 Views

AKENG44_Escalade Page 56 Wednesday, July 16, 2008 12:22 PM Instrumentation and Controls • DELAY DOOR LOCK (delay door lock) This feature allows you to delay vehicle locking for five seconds in the event that the vehicle receives a door lock command while the liftgate or a door is open. Press the button to enter the submenu. While in this submenu, press the button repeatedly to scroll through the following options: - OFF The doors will lock immediately when the power door lock switch is pressed. -ON If the power door lock switch is pressed while the liftgate or a door is open, locking will be delayed for five seconds after the last door is closed. This is the default setting. - NO CHANGE Once the desired setting is displayed, press the button to select it. You may now either exit programming mode or program the next available feature. To exit programming mode, see "Exiting Programming Mode" later in this section. See "Delayed Locking" under "Doors" for information on how this feature works. . . . 56

AKENG44_Escalade Page 57 Wednesday, July 16, 2008 12:22 PM Section 1 • EXIT LIGHTING This feature allows you to designate the length of time that the exterior lights stay on (when it is dark outside) after the ignition is turned off. Press the button to enter the submenu. While in this submenu, press the button repeatedly to scroll through the following options: - OFF The exterior lights will not stay on. - 30 SECONDS This is the default setting. -1 MINUTE -2 MINUTES - NO CHANGE Once the desired setting is displayed, press the button to select it. You may now either exit programming mode or program the next available feature. To exit programming mode, see "Exiting Programming Mode" later in this section. – 57 . . .

AKENG44_<strong>Escalade</strong> Page 56 Wednesday, July 16, 2008 12:22 PM<br />

Instrumentation and Controls<br />

• DELAY DOOR LOCK (delay<br />

door lock)<br />

This feature allows you to delay<br />

vehicle locking for five seconds<br />

in the event that the vehicle<br />

receives a door lock command<br />

while the liftgate or a door is<br />

open.<br />

Press the button to enter the<br />

submenu.<br />

While in this submenu, press<br />

the button repeatedly to<br />

scroll through the following<br />

options:<br />

- OFF<br />

The doors will lock<br />

immediately when the<br />

power door lock switch is<br />

pressed.<br />

-ON<br />

If the power door lock switch<br />

is pressed while the liftgate or<br />

a door is open, locking will be<br />

delayed for five seconds after<br />

the last door is closed.<br />

This is the default setting.<br />

- NO CHANGE<br />

Once the desired setting is<br />

displayed, press the button<br />

to select it.<br />

You may now either exit programming<br />

mode or program<br />

the next available feature.<br />

To exit programming mode,<br />

see "Exiting Programming<br />

Mode" later in this section.<br />

See "Delayed Locking" under<br />

"Doors" for information on how<br />

this feature works.<br />

. . . 56

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!