Table of Contents Cadillac Escalade - IFS Europe BV

Table of Contents Cadillac Escalade - IFS Europe BV Table of Contents Cadillac Escalade - IFS Europe BV

02.07.2014 Views

AKENG44_Escalade Page 54 Wednesday, July 16, 2008 12:22 PM Instrumentation and Controls • REMOTE DOOR LOCK) This feature allows you to select the type of feedback you will receive when locking the vehicle using the remote keyless entry transmitter. Note: You will only receive feedback if the doors are closed. Press the button to enter the submenu. While in this submenu, press the button repeatedly to scroll through the following options: - OFF There is no horn or lights feedback when the remote keyless entry lock button is pressed. - LIGHTS ONLY With this setting activated, the exterior lights will flash when the lock button on the transmitter is pressed. - HORN ONLY With this setting activated, the horn will sound when the lock button on the transmitter is pressed twice. - HORN & LIGHTS With this setting activated, the exterior lights will flash when the lock button on the transmitter is pressed. The horn will sound if you press the lock button again within five seconds. This is the default setting. - NO CHANGE Once the desired setting is displayed, press the button to select it. You may now either exit programming mode or program the next available feature. To exit programming mode, see "Exiting Programming Mode" later in this section. See "Remote Keyless Entry" in Section 3 for more information. . . . 54

AKENG44_Escalade Page 55 Wednesday, July 16, 2008 12:22 PM Section 1 • REMOTE DOOR UNLOCK This feature allows you to select the type of feedback you will receive when unlocking the vehicle using the remote keyless entry transmitter. Note: You will only receive feedback if the doors are closed. Press the button to enter the submenu. While in this submenu, press the button repeatedly to scroll through the following options: - LIGHTS OFF With this setting activated, the exterior lights will not flash when the unlock button on the transmitter is pressed. - LIGHTS ON With this setting activated, the exterior lights will flash when the unlock button on the transmitter is pressed. This is the default setting. - NO CHANGE Once the desired setting is displayed, press the button to select it. You may now either exit programming mode or program the next available feature. To exit programming mode, see "Exiting Programming Mode" later in this section. See "Remote Keyless Entry" in Section 3 for more information. – 55 . . .

AKENG44_<strong>Escalade</strong> Page 55 Wednesday, July 16, 2008 12:22 PM<br />

Section 1<br />

• REMOTE DOOR UNLOCK<br />

This feature allows you to select<br />

the type <strong>of</strong> feedback you will<br />

receive when unlocking the<br />

vehicle using the remote<br />

keyless entry transmitter.<br />

Note: You will only receive<br />

feedback if the doors are<br />

closed.<br />

Press the button to enter the<br />

submenu.<br />

While in this submenu, press<br />

the button repeatedly to<br />

scroll through the following<br />

options:<br />

- LIGHTS OFF<br />

With this setting activated,<br />

the exterior lights will not<br />

flash when the unlock button<br />

on the transmitter is pressed.<br />

- LIGHTS ON<br />

With this setting activated,<br />

the exterior lights will flash<br />

when the unlock button on<br />

the transmitter is pressed.<br />

This is the default setting.<br />

- NO CHANGE<br />

Once the desired setting is<br />

displayed, press the button<br />

to select it.<br />

You may now either exit programming<br />

mode or program<br />

the next available feature.<br />

To exit programming mode,<br />

see "Exiting Programming<br />

Mode" later in this section.<br />

See "Remote Keyless Entry" in<br />

Section 3 for more information.<br />

–<br />

55 . . .

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!