Table of Contents Cadillac Escalade - IFS Europe BV

AKENG44_Escalade Page 46 Wednesday, July 16, 2008 12:22 PM
Instrumentation and Controls
Be sure to replace the engine
oil filter each time you change
engine oil.
Even if the oil life system does
not indicate that an oil change
is necessary, the engine oil and
filter must be changed at least
once a year.
After you change the oil, the oil
life monitor will need to be
reset. See your dealer for
service.
See "Engine Oil" in Section 4
for more information.
Also see the Maintenance
Schedule booklet for more
information.
• UNITS
You can scroll through and
activate one of the following
feature settings:
- ENGLISH (English Units)
This setting lets you view
your displays in U.S. English
units.
- METRIC (Metric Units)
This setting lets you view
your displays in metric units.
When the desired feature
setting is displayed, press the
button to select it.
• BATTERY VOLTAGE
This display lets you monitor
battery voltage to make sure it
is charging properly.
You may see the reading fluctuate.
This is normal.
If the current voltage is outside
the normal operating range,
LOW or HIGH will appear on
the display next to the numeric
voltage reading.
If there is a problem with the
battery charging system, a
message will be displayed. See
"Driver Information Center
Messages" later in this section.
The Charging System Light
may also appear on the
instrument cluster.
See "Charging System Light"
under "Warning Lights" earlier
in this section for more information.
. . . 46