Table of Contents Cadillac Escalade - IFS Europe BV
Table of Contents Cadillac Escalade - IFS Europe BV Table of Contents Cadillac Escalade - IFS Europe BV
AKENG44_Escalade Page 380 Wednesday, July 16, 2008 12:22 PM Problems on the Road 4. Assemble the wheel wrench and the two jack handle extensions. 5. Insert the hoist end (open end) of the extension into the hole in the bumper. Connect the extension onto the hoist shaft. Do not use the chisel end of the wheel wrench. . . . 380
AKENG44_Escalade Page 381 Wednesday, July 16, 2008 12:22 PM Section 5 6. Turn the wheel wrench clockwise to raise the tire off the ground. Make sure the retainer is fully seated across the underside of the wheel and centered in the wheel opening. 7. Keep turning the wheel wrench until the tire is against the underside of the vehicle. 8. When the tire is raised against the underside of the vehicle, continue turning the wrench until you hear two clicks or feel it skip twice. The spare tire hoist can not be overtightened. 9. Try to move the tire with your hands to be sure that it is secured in place. If the tire moves, use the wheel wrench to tighten the cable. 10. Reinstall the lock. 11. Reinstall the access hole cover. 12. Reinstall the hitch cover. – – – – – 381 . . .
- Page 329 and 330: AKENG44_Escalade Page 329 Wednesday
- Page 331 and 332: AKENG44_Escalade Page 331 Wednesday
- Page 333 and 334: AKENG44_Escalade Page 333 Wednesday
- Page 335 and 336: AKENG44_Escalade Page 335 Wednesday
- Page 337 and 338: AKENG44_Escalade Page 337 Wednesday
- Page 339 and 340: AKENG44_Escalade Page 339 Wednesday
- Page 341 and 342: AKENG44_Escalade Page 341 Wednesday
- Page 343 and 344: AKENG44_Escalade Page 343 Wednesday
- Page 345 and 346: AKENG44_Escalade Page 345 Wednesday
- Page 347 and 348: AKENG44_Escalade Page 347 Wednesday
- Page 349 and 350: AKENG44_Escalade Page 349 Wednesday
- Page 351 and 352: AKENG44_Escalade Page 351 Wednesday
- Page 353 and 354: AKENG44_Escalade Page 353 Wednesday
- Page 355 and 356: AKENG44_Escalade Page 355 Wednesday
- Page 357 and 358: AKENG44_Escalade Page 357 Wednesday
- Page 359 and 360: AKENG44_Escalade Page 359 Wednesday
- Page 361 and 362: AKENG44_Escalade Page 361 Wednesday
- Page 363 and 364: AKENG44_Escalade Page 363 Wednesday
- Page 365 and 366: AKENG44_Escalade Page 365 Wednesday
- Page 367 and 368: AKENG44_Escalade Page 367 Wednesday
- Page 369 and 370: AKENG44_Escalade Page 369 Wednesday
- Page 371 and 372: AKENG44_Escalade Page 371 Wednesday
- Page 373 and 374: AKENG44_Escalade Page 373 Wednesday
- Page 375 and 376: AKENG44_Escalade Page 375 Wednesday
- Page 377 and 378: AKENG44_Escalade Page 377 Wednesday
- Page 379: AKENG44_Escalade Page 379 Wednesday
- Page 383 and 384: AKENG44_Escalade Page 383 Wednesday
- Page 385 and 386: AKENG44_Escalade Page 385 Wednesday
- Page 387 and 388: AKENG44_Escalade Page 387 Wednesday
- Page 389 and 390: AKENG44_Escalade Page 389 Wednesday
- Page 391 and 392: AKENG44_Escalade Page 391 Wednesday
- Page 393 and 394: AKENG44_Escalade Page 393 Wednesday
- Page 395 and 396: AKENG44_Escalade Page 395 Wednesday
- Page 397 and 398: AKENG44_Escalade Page 397 Wednesday
- Page 399 and 400: AKENG44_Escalade Page 399 Wednesday
- Page 401 and 402: AKENG44_Escalade Page 401 Wednesday
- Page 403 and 404: AKENG44_Escalade Page 403 Wednesday
- Page 405 and 406: AKENG44_Escalade Page 405 Wednesday
- Page 407 and 408: AKENG44_Escalade Page 407 Wednesday
- Page 409 and 410: AKENG44_Escalade Page 409 Wednesday
AKENG44_<strong>Escalade</strong> Page 380 Wednesday, July 16, 2008 12:22 PM<br />
Problems on the Road<br />
4. Assemble the wheel wrench and the two jack handle extensions. 5. Insert the hoist end (open<br />
end) <strong>of</strong> the extension into the<br />
hole in the bumper. Connect<br />
the extension onto the hoist<br />
shaft.<br />
Do not use the chisel end <strong>of</strong><br />
the wheel wrench.<br />
. . . 380