Table of Contents Cadillac Escalade - IFS Europe BV

AKENG44_Escalade Page 346 Wednesday, July 16, 2008 12:22 PM
Service and Maintenance
4. Replace the bulb and reverse
the steps for installation.
Be sure to properly align the
holes in the assembly to the
round ends of the mounting
pins.
2. Remove the screws and pull
out the light assembly.
Pull the light assembly straight
rearward to disengage the pins
on the assembly.
3. Press the tab (if equipped)
and turn the socket counterclockwise
to remove it.
Pull the bulb straight out to
remove it from the socket.
License lights
1. Remove the two screws from
each light assembly.
2. Rotate the bulb assembly and
pull the assembly through the
opening in the liftgate trim.
3. Turn the bulb socket counterclockwise
to remove it.
Pull the bulb straight out to
remove it from the socket.
4. Replace the bulb and reverse
the steps for installation.
. . . 346