Table of Contents Cadillac Escalade - IFS Europe BV

AKENG44_Escalade Page 160 Wednesday, July 16, 2008 12:22 PM
Instrumentation and Controls
■ MEMORY FEATURE
This feature allows two different
drivers (driver number 1 or driver
number 2) to store and recall
their own driver's seat positions
(including recliner and lumbar
adjustment), outside mirror
positions, steering wheel and
adjustable pedal positions.
The controls are located on the
driver’s door panel.
To program the memory settings:
1. Adjust the driver's seat,
outside mirrors, steering
wheel and adjustable pedals
to your desired settings.
2. Press and hold the appropriate
driver memory button (1 or 2)
until you hear two beeps
indicating the settings have
been saved.
Now, when your transmission is in
P (Park) and you press one of the
memory buttons, 1 or 2, you will
hear a beep and the memory
settings will be recalled.
Memory recall can be stopped by
pressing any of the following:
• power seat controls
• power mirror controls
• memory buttons 1 or 2
• adjustable pedal switch
• power tilt wheel switch
You can use the Driver Information
Center to program the memory
feature to adjust to your chosen
settings when you press the unlock
button on the Remote Keyless
Entry transmitter.
See the following under "Driver
Information Center" earlier in this
section for more information:
• Feature Customization
- MEMORY SEAT RECALL
Note:
Some mirrors may not be
compatible with the memory
feature.
. . . 160