Table of Contents Cadillac Escalade - IFS Europe BV

Table of Contents Cadillac Escalade - IFS Europe BV Table of Contents Cadillac Escalade - IFS Europe BV

02.07.2014 Views

AKENG44_Escalade Page 122 Wednesday, July 16, 2008 12:22 PM Instrumentation and Controls 3. Press the SET button and release it. 4. Take your foot off the accelerator pedal. The Cruise Control Light on the instrument cluster should turn on. CAUTION RES SET Don't leave your cruise control switch on when you're not using it. To Get Out of Cruise Control To temporarily turn off cruise control without erasing the set speed memory, do the following: • Step on the brake pedal. Or, • Press the cruise control cancel button . The Cruise Control light will turn off. RES SET To turn off cruise control and erase the set speed memory, do the following: • Press the cruise control button. or • Turn off the ignition. . . . 122

AKENG44_Escalade Page 123 Wednesday, July 16, 2008 12:22 PM Section 1 RES SET When you push the plus (+) button to return to your chosen speed, don't hold the switch there. If you hold it, the vehicle will accelerate and continue to gain speed. It will keep going faster until you release the switch or apply the brake. RES SET – To Go Back to Your Set Speed If you have temporarily turned off cruise control without erasing the set speed memory, do the following to re-engage cruise control: • Once you're going about 40 km/h (25 mph) or more, press the plus (+) button for a moment. You'll go right back up to your chosen speed and stay there. To Go to a Higher Speed To go to a higher speed, do any of the following: • Use the accelerator pedal to get to the higher speed. Press SET. Release the button and the accelerator pedal. You'll now cruise at the higher speed. 123 . . .

AKENG44_<strong>Escalade</strong> Page 122 Wednesday, July 16, 2008 12:22 PM<br />

Instrumentation and Controls<br />

3. Press the SET button and<br />

release it.<br />

4. Take your foot <strong>of</strong>f the<br />

accelerator pedal.<br />

The Cruise Control Light on the<br />

instrument cluster should turn on.<br />

CAUTION<br />

RES<br />

SET<br />

Don't leave your cruise control<br />

switch on when you're not<br />

using it.<br />

To Get Out <strong>of</strong> Cruise Control<br />

To temporarily turn <strong>of</strong>f cruise<br />

control without erasing the set<br />

speed memory, do the following:<br />

• Step on the brake pedal. Or,<br />

• Press the cruise control cancel<br />

button .<br />

The Cruise Control light will turn<br />

<strong>of</strong>f.<br />

RES<br />

SET<br />

To turn <strong>of</strong>f cruise control and erase<br />

the set speed memory, do the<br />

following:<br />

• Press the cruise control<br />

button.<br />

or<br />

• Turn <strong>of</strong>f the ignition.<br />

. . . 122

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!