Table of Contents Cadillac Escalade - IFS Europe BV

Table of Contents Cadillac Escalade - IFS Europe BV Table of Contents Cadillac Escalade - IFS Europe BV

02.07.2014 Views

AKENG44_Escalade Page 114 Wednesday, July 16, 2008 12:22 PM Instrumentation and Controls Gearshift Lever See "Starting and Operating Instructions" for additional information on the Gearshift Lever . Tow/Haul Button Press and release the button to turn the tow/haul mode on or off. See "Tow/Haul Mode" under "Trailer Towing" in Section 3. To turn grade braking on or off, press and release the tow/haul button located at the end of the shift lever. See "Grade Braking" in Section 3 for more information. Hazard Warning Flasher Press the flasher switch in to make your front and rear turn signal lights flash on and off. It works whatever position your ignition key is in, and even if the key isn't in the ignition. To turn the flasher off, press the switch down again. When the flasher is on, the function of the turn signal lever is cancelled. . . . 114

AKENG44_Escalade Page 115 Wednesday, July 16, 2008 12:22 PM Section 1 The turn signal arrows on the instrument cluster will not flash faster when a side repeater light is burned out. Check the side repeater lights periodically to make sure they are working properly. If a bulb is burned out, replace it to help avoid an accident. If the green arrows don't go on at all when you signal a turn, check the fuse and for burned-out bulbs. See "Fuses and Circuit Breakers" in Section 4 for additional information. If a turn signal is left on for more than 1.2 km, a chime will sound and the TURN SIGNAL ON message will appear on the Driver Information Center display to remind you to turn it off. If you need it on longer, turn the signal off, then back on. ■ MULTIFUNCTION LEVER Turn Signal To signal a turn, move the lever all the way up (right) or down (left). When the turn is over, the lever will return automatically. To signal a lane change, press the lever for less than one second and the turn signal will automatically flash three times. If more flashes are desired, hold it there until you complete your lane change. An arrow on the instrument cluster will flash in the direction of the turn or lane change. If Tow/Haul Mode is activated when you signal a lane change, the turn signal lights will flash six times. Your vehicle is equipped with side repeater lights. The side repeater lights come on whenever the turn signal lights are on. If the arrows flash at a faster rate than normal, a signal bulb may be burned out. Check the front and rear signal lights to make sure they are working properly. – 115 . . .

AKENG44_<strong>Escalade</strong> Page 114 Wednesday, July 16, 2008 12:22 PM<br />

Instrumentation and Controls<br />

Gearshift Lever<br />

See "Starting and Operating<br />

Instructions" for additional information<br />

on the Gearshift Lever .<br />

Tow/Haul Button<br />

Press and release the button to<br />

turn the tow/haul mode on or <strong>of</strong>f.<br />

See "Tow/Haul Mode" under<br />

"Trailer Towing" in Section 3.<br />

To turn grade braking on or <strong>of</strong>f,<br />

press and release the tow/haul<br />

button located at the end <strong>of</strong> the<br />

shift lever.<br />

See "Grade Braking" in Section 3<br />

for more information.<br />

Hazard Warning Flasher<br />

Press the flasher switch in to<br />

make your front and rear turn<br />

signal lights flash on and <strong>of</strong>f. It<br />

works whatever position your<br />

ignition key is in, and even if the<br />

key isn't in the ignition. To turn the<br />

flasher <strong>of</strong>f, press the switch down<br />

again. When the flasher is on, the<br />

function <strong>of</strong> the turn signal lever is<br />

cancelled.<br />

. . . 114

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!