Agenda with Maps and Applications (21Mb) - pdf - Selby District ...

approved in writing by the Local Planning Authority. Detailed plans should be
to an appropriate scale e.g. 1:1, 1:2 or 1:5.
Reason:
To allow the Local Planning Authority to control the development in detail in
order to ensure that the proposals are in keeping with the character and
appearance of the conservation area to comply with Policies ENV1 and
ENV25 of the Selby District Local Plan.
04. There shall be no excavation or other groundworks, except for investigative
works, or the depositing of material on the site until the access(es) to the site
have been set out and constructed in accordance with the published
Specification of the Highway Authority and the following requirements:
(i) The existing access shall be improved to give a minimum carriageway
width of 4.1 metres, and that part of the access road extending 6 metres into
the site shall be constructed in accordance with Standard Detail number E6.
(ii) Any gates or barriers shall be erected a minimum distance of 6 metres
back from the carriageway of the existing highway and shall not be able to
swing over the existing or proposed highway.
(iii) Provision shall be made to prevent surface water from the site/plot
discharging onto the existing or proposed highway in accordance with the
approved details and the Specification of the Local Highway Authority.
All works shall accord with the approved details unless otherwise agreed in
writing by the Local Planning Authority.
INFORMATIVE:
You are advised that a separate licence will be required from the Highway
Authority in order to allow any works in the adopted highway to be carried
out. The ‘Specification for Housing and Industrial Estate Roads and Private
Street Works’ published by North Yorkshire County Council, the Highway
Authority, is available at the County Council’s offices. The local office of the
Highway Authority will also be pleased to provide the detailed constructional
specification referred to in this condition.
Reason:
To ensure a satisfactory means of access to the site from the public highway
in the interests of vehicle and pedestrian safety and convenience in
accordance with Policies T1, T2 and ENV1 of the Selby District Local Plan.
05. There shall be no access or egress by any vehicles between the highway
and the application site (except for the purposes of constructing the initial site
access) until visibility splays providing clear visibility of 2 metres x 2 metres
measured down each side of the access and the back edge of the footway of
the major road have been provided. Once created, these visibility areas shall
be maintained clear of any obstruction and retained for their intended
purpose at all times.
342