Agenda with Maps and Applications (21Mb) - pdf - Selby District ...

Agenda with Maps and Applications (21Mb) - pdf - Selby District ... Agenda with Maps and Applications (21Mb) - pdf - Selby District ...

02.07.2014 Views

04. The site shall be developed with separate systems of drainage for foul and surface water on and off site. Reason: In the interest of satisfactory and sustainable drainage 05. No piped discharge of surface water from the application site shall take place until works to provide a satisfactory outfall for surface water have been completed in accordance with details to be submitted to and approved by the local planning authority before development commences. Reason: To ensure that the site is properly drained and surface water is not discharged to the foul sewerage system which will prevent overloading 06. There shall be no excavation or other groundworks, except for investigative works, or the depositing of material on the site until the access(es) to the site have been set out and constructed in accordance with the published Specification of the Highway Authority and the following requirements: (i)(a) The access shall be formed to give a minimum carriageway width of 3.2 metres, and that part of the access road extending 6 metres into the site shall be constructed in accordance with Standard Detail number E6. (ii) Any gates or barriers shall be erected a minimum distance of 6 metres back from the carriageway of the existing highway and shall not be able to swing over the existing or proposed highway. (iii) Provision shall be made to prevent surface water from the site/plot discharging onto the existing or proposed highway in accordance with the Specification of the Local Highway Authority. All works shall accord with the approved details. Reason: In accordance with policy number and to ensure a satisfactory means of access to the site from the public highway in the interests of vehicle and pedestrian safety and convenience. INFORMATIVE You are advised that a separate licence will be required from the Highway Authority in order to allow any works in the adopted highway to be carried out. The ‘Specification for Housing and Industrial Estate Roads and Private Street Works’ published by North Yorkshire County Council, the Highway Authority, is available at the County Council’s offices. The local office of the Highway Authority will also be pleased to provide the detailed constructional specification referred to in this condition. 07. There shall be no access or egress by any vehicles between the highway and the application site (except for the purposes of constructing the initial site 326

access) until splays are provided giving clear visibility of 70 metres measured along both channel lines of the major road (Back Lane) from a point measured 2.4 metres down the centre line of the access road. Once created, these visibility areas shall be maintained clear of any obstruction and retained for their intended purpose at all times. Reason In accordance with policy number and in the interests of road safety. INFORMATIVE An explanation of the terms used above is available from the Highway Authority. 08. No part of the development shall be brought into use until the approved vehicle access, parking, manoeuvring and turning areas approved under condition number: (i) Have been constructed in accordance with the submitted drawing (YEW- 277-001-02A) Once created these areas shall be maintained clear of any obstruction and retained for their intended purpose at all times. Reason In accordance with policy number and to provide for appropriate on-site vehicle facilities in the interests of highway safety and the general amenity of the development. 09. The development hereby permitted shall be carried out in accordance with the plans/drawings listed below: 3.1 Legal Issues ELPR - Elevations as Proposed – 277-001-02B- received 06.03.2012 LOC - Location Plan - 277-001-03A – received 25.01.2012 LAY - Planning Layout - 277-001-04A – received 09.02.2012 ELV - Elevations as Existing - 277-001-01A – received 09.02.2012 Reason: For the avoidance of doubt 3.1.1 Planning Acts This application has been determined in accordance with the relevant planning acts. 3.1.2 Human Rights Act 1998 It is considered that a decision made in accordance with this recommendation would not result in a any breach of convention rights. 3.1.3 Equality Act 2010 This application has been determined with regard to the Council’s duties and obligations under the Equality Act 2010. However it is considered that the recommendation made in this report is proportionate taking into account the 327

04. The site shall be developed <strong>with</strong> separate systems of drainage for foul <strong>and</strong><br />

surface water on <strong>and</strong> off site.<br />

Reason:<br />

In the interest of satisfactory <strong>and</strong> sustainable drainage<br />

05. No piped discharge of surface water from the application site shall take place<br />

until works to provide a satisfactory outfall for surface water have been<br />

completed in accordance <strong>with</strong> details to be submitted to <strong>and</strong> approved by the<br />

local planning authority before development commences.<br />

Reason:<br />

To ensure that the site is properly drained <strong>and</strong> surface water is not<br />

discharged to the foul sewerage system which will prevent overloading<br />

06. There shall be no excavation or other groundworks, except for investigative<br />

works, or the depositing of material on the site until the access(es) to the site<br />

have been set out <strong>and</strong> constructed in accordance <strong>with</strong> the published<br />

Specification of the Highway Authority <strong>and</strong> the following requirements:<br />

(i)(a) The access shall be formed to give a minimum carriageway width of<br />

3.2 metres, <strong>and</strong> that part of the access road extending 6 metres into the site<br />

shall be constructed in accordance <strong>with</strong> St<strong>and</strong>ard Detail number E6.<br />

(ii) Any gates or barriers shall be erected a minimum distance of 6 metres<br />

back from the carriageway of the existing highway <strong>and</strong> shall not be able to<br />

swing over the existing or proposed highway.<br />

(iii) Provision shall be made to prevent surface water from the site/plot<br />

discharging onto the existing or proposed highway in accordance <strong>with</strong> the<br />

Specification of the Local Highway Authority.<br />

All works shall accord <strong>with</strong> the approved details.<br />

Reason:<br />

In accordance <strong>with</strong> policy number <strong>and</strong> to ensure a satisfactory means of<br />

access to the site from the public highway in the interests of vehicle <strong>and</strong><br />

pedestrian safety <strong>and</strong> convenience.<br />

INFORMATIVE<br />

You are advised that a separate licence will be required from the Highway<br />

Authority in order to allow any works in the adopted highway to be carried<br />

out. The ‘Specification for Housing <strong>and</strong> Industrial Estate Roads <strong>and</strong> Private<br />

Street Works’ published by North Yorkshire County Council, the Highway<br />

Authority, is available at the County Council’s offices. The local office of the<br />

Highway Authority will also be pleased to provide the detailed constructional<br />

specification referred to in this condition.<br />

07. There shall be no access or egress by any vehicles between the highway<br />

<strong>and</strong> the application site (except for the purposes of constructing the initial site<br />

326

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!