PRT CTRL Integrated Controller Reference Manual

To access the PGM Expander module programming login using a valid installer code and then
select [MENU, 4, 1, 3]. The screen displays “PGM exp to modify” as shown in the following
example.
16 PGM Exp to
modify: PX001
Every time you press the Enter key, the next screen appears. The different screens are
described in the following sub-sections. Programming the PGM Expander allows you to set the
polling time of the module and power supply options.
When programming modules some options are processed at the module, for these options to
operate correctly a network update must be performed and the zone expander must be
registered and online.
Updating modules can be accessed by selecting [MENU, 4, 8, 1, 3], you can also check the
status of your modules by selecting [MENU, 4, 8, 1, 1] for all modules presently offline and
[MENU, 4, 8, 1, 2] for all online modules. For more information refer to the advanced menu
section on page XXX.
Selecting a PGM Expander to Modify
Each PGM expander is assigned a unique address from 001 to 250. Programming the address
of the PGM Expander Module (PRT-PG16) is covered in the installation instructions included
with your PRT-PG16 PGM Expander Module.
16 PGM Exp to
modify: PX001
Type the appropriate 3-digit PGM Expander address or use the [] and [] keys. When the
desired address appears on the screen, press [ENTER] to program the selected PGM
Expander module. The maximum number of PGM Expanders that can be programmed is
limited by your system’s memory and configured profile.
Displaying Selected 16 PGM Expander Information
It is possible to show the current 16 PGM Expander registration and information details
(registration, online and version) from the 16 PGM expander selection display.
16 PGM Exp to
modify: PX001
Type the appropriate 3-digit 16 PGM Expander address or use the [] and [] keys. When
the desired address appears on the screen, press the [ARM] key to display information on the
selected 16 PGM Expander. The screen will now display information about the 16 PGM
Expander that was selected. Press any other key to return to the 16 Zone Expander selection
window.
11-14-72-B9 [23]
V 1.05 2404 RO
The display above represents the following information for the selected keypad:
87 Protégé Integrated System Controller Reference Manual