PRT CTRL Integrated Controller Reference Manual

defer warning keypad group.
Disabled the keypad will not display any defer messages regardless of the
defer area keypad group.
It is recommended not to enable/disable or modify the settings of reserved options.
Keypad Access Options
Options that relate to the keypad access control functions and some specific area control
menu settings.
KP001 Access
[--------]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Unlock Controlled Door
Enabled the keypad will allow a user to unlock the controlled door by
pressing the [FUNCTION] key.
Disabled the keypad performs no action when the function key is pressed
and held. The function key may still be used for home automation or control
functions if enabled for the keypad.
Option 2 - Strict Primary Area Status Display
Enabled the keypad will only display the primary area and will not show ANY
other areas regardless of the programmed options for the logged in user or
the keypad security settings.
Disabled the keypad will function normally using the area configuration and
user area settings.
Option 3 - 24 Hour Area Access
Enabled the keypad will allow the 24Hr status screen of an area to be
accessed by pressing the [] key when the user is logged in and at the
area display screen. The user must have the 24Hr menu option set.
Disabled the keypad will not display the 24 Hour area status screen.
Option 4 - Area Group Access
Enabled the keypad will allow the area group access screen to be accessed
by pressing the [] key when the user is logged in and at the area display
screen.
Disabled the keypad will not allow access to the area groups screen.
Option 5 - Unlock Assigned Door Offline
Enabled the keypad will allow the [FUNCTION] key to be pressed and held
generating an unlock request for the assigned door. This can be
Protégé Integrated System Controller Reference Manual
82