PRT CTRL Integrated Controller Reference Manual

To enter a dual user entry time (001 to 250 seconds), use the keypad as explained in section
Entering Decimal Numbers on Page 405 and press [ENTER].
Keypad Invalid Code Lockout Time
If the Lockout option is enabled for the selected keypad and the maximum number of
incorrect user codes (PIN Numbers) is reached (3 Times), the time programmed here defines
how long the keypad will be locked out. During this period, the keypad will display the lockout
message and ignore all key entries or login attempts by ay user. A lockout time of 0 seconds
will disable this function regardless of the lockout option setting.
KP001 Invalid
time: 060 secs
To enter a lockout time (001 to 250 seconds), use the keypad as explained in section Entering
Decimal Numbers on Page 405.
Keypad Smoke Detector Reset PGM
The PGM that is programmed as the keypad smoke detector reset PGM will be activated when
a user press's the [CLEAR + ENTER] keys together. The selected PGM should have a time
programmed of 5 to 10 seconds, for information on setting a PGM activation time refer to the
PGM Programming section on Page 146.
KP001 Smoke
pgm: -----:--
To enter a smoke detector PGM, use the keypad as explained in section Entering PGM and
PGM Groups on Page 410.
Keypad Module Options
Options that relate to the keypad module can be set using option entry.
KP001 Module
[1-34----]
To modify options, use the keypad as explained in section Entering Data Options on Page 409.
Option 1 - Beep on Key Press
Enabled the keypad will NOT beep when a key is pressed.
Disabled the keypad will generate a beep tone each time a key is pressed.
Option 2 - Zone Duplex Operation
Enabled the keypad will enable the Duplex Zone option making it possible to
connect four zone inputs to the keypad.
Disabled the keypad will use the standard zone configuration settings.
Option 3 - Keypad Lockout
79 Protégé Integrated System Controller Reference Manual