PRT CTRL Integrated Controller Reference Manual

KP001 Menu Grp
None
Use the [1] and [3] keys to scroll the menu group selection. For more information about the
list control data entry refer to the section List Control Data Entry on Page 406.
Keypad Area Group
Users can only access an area assigned to the keypad if the same area is also assigned to the
user’s arm and/or disarm area group. For more information on which areas are displayed by
the keypad refer to the Area Security section on page 30.
KP001 Area Grp
None
Use the [1] and [3] keys to scroll the area group selection. For more information about the
list control data entry refer to the section List Control Data Entry on Page 406.
Keypad Control Door
The keypad control door configured will be is used by the keypad when the door control
option is enabled. This allows a door to be unlocked (similar to a request to exit) by pressing
and holding the [FUNCTION] key for two seconds.
KP001 Ctrl Door
None
Use the [1] and [3] keys to scroll the door selection. For more information about the list
control data entry refer to the section List Control Data Entry on Page 406.
Keypad Auto Logout Time
When the user does not perform any action on the keypad for the time programmed in the
logout time the keypad will automatically log the user out. Programming the option Never
Logout should be avoided unless for training or demonstration purposes.
KP001 Logout
10 Sec
Use the [1] and [3] keys to scroll the auto logout time selection. For more information about
the list control data entry refer to the section List Control Data Entry on Page 406.
Keypad Dual User Entry Time
When the keypad is set to require dual-code entry, the dual-code entry time determines how
long the users have to enter both codes. Dual code entry is primarily used for the control of
ATM and Banking applications. For example, if the time is set to 025 seconds, the dual-code
master and dual code provider must successfully enter their codes within 25 seconds in order
to gain access. The dual-code can be overridden only by a user that has the dual-code
override option set (Super User Option).
KP001 Dual
time: 020 secs
Protégé Integrated System Controller Reference Manual
78