PRT CTRL Integrated Controller Reference Manual

Wed 19:56:50 Use
r Master At KP00
• Pressing the [] key will move you to the next display screen shows the previous
screens bottom line moved to the top and then the rest of the event information on
the bottom line.
r Master at KP00
1 Menu 003
• Pressing the [] key once more will move to the final display for the event.
1 Menu 003
You can scroll back to the other screens by pressing the [] or you can move to the next
event by pressing the [] and [] keys.
Hex Review
To access the hex event review screen select [MENU, 3, 2]. The Hex Review screen will show
the event information in a machine readable hexadecimal format. This information is primarily
used for the verification of third party, OEM and external software that is used to access the
Protégé System event structure. For more information on event codes, event formats and the
meaning of the data structures refer to appendix Event Code and Formats on page XX.
*Event Menu*
2. Hex Review
The screen will show the latest event that has occurred on the system at the time the event
review menu item was selected. The display will show this event information in a hexadecimal
format.
Hex Review Display
When the hex display is selected it will show the data of the event in hexadecimal in the
following format. To move between the display screens press [] and []. To move between
the events stored in the event review buffer use the [] and [] keys.
• The display will show the memory location, event code and the time that the event
code occurred in the system. In the screen shown below the memory address is
0x441A:A6D4, the event code is 0x030C and the time the event occurred was
19:26:58 and 9ms.
441A:A6D4 [030C]
19:26:58.09
• Pressing the [] key will move you to the next display screen that shows the data
that the event occurred and the day of the week it occurred on.
Protégé Integrated System Controller Reference Manual
72