PRT CTRL Integrated Controller Reference Manual

FG001 Name
All Floors
To scroll floor groups by name use the [] and [] keys. To modify or enter a new name for
the selected floor group use the keypad as explained in section Entering Text and Names on
Page 406 and press [ENTER].
By default the floor group name will be prefixed by an '*' this indicates that the name is an
editable name in the system.
Operating Schedule
The operating schedule for the floor group determines when the floor group is valid and if it
will use a secondary floor group when the operating schedule is not valid. A schedule is a
series of times and days that can be programmed to prevent the operating of functions based
on a 7 day week and 24 hour clock. For more information on the programming of the
schedule refer to the Schedule Programming section on Page 344.
FG001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the
schedule displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
Secondary Floor Group
A secondary floor group can be selected that will be used when the schedule of the floor
group that is programmed is not valid. The schedule of the secondary floor group must be
valid or set to none. The secondary floor group allows very powerful floor group controls to be
placed on users during certain times of the day preventing access to certain doors.
FG001 Secondary
None
Use the [1] and [3] keys to scroll the secondary floor group selection and press [ENTER] to
select the floor group displayed. For more information about the list control data entry refer
to the section List Control Data Entry on Page 406. Programming a secondary floor group that
uses the current area group being edited will perform no function.
Floor Group Assignment Blocks 1 to 16
The floor group assignment blocks assign a floor to the group that is being programmed. Each
block is 8 floor and there 16 floor blocks that can be programmed.
FG001 Block 1
[12345678]
To modify the block setting options, follow the settings as explained in section Entering Data
Options on Page 409. Use the relevant key from 1 to 8 to toggle the state of the option.
Pressing the [ENTER] key will move you to the next block in the floor group until you return
to the floor group selection.
69 Protégé Integrated System Controller Reference Manual