PRT CTRL Integrated Controller Reference Manual

7
8
9
10
11
12
13
14
15
16
041 042 043 044 045 046 047 048
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
049 050 051 052 053 054 055 056
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
057 058 059 060 061 062 063 064
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
065 066 067 068 069 070 071 072
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
073 074 075 076 077 078 079 080
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
081 082 083 084 085 086 087 088
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
089 090 091 092 093 094 095 096
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
097 098 099 100 101 102 103 104
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
105 106 107 108 109 110 111 112
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
113 114 115 116 117 118 119 120
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
121 122 123 124 125 126 127 128
Floor Groups
To access the floor group programming login using a valid master code and then select
[MENU, 2, 8]. The screen displays “Floor Group to modify” as shown in the following
example. An elevator group is used to allow users access to certain groups of elevators within
a building. By programming a elevator group and floor group you can limit a users access.
Floor Group to
modify: FG001
Every time you press the [ENTER] key, the next screen appears. The different screens are
described in the following sub-sections. Programming the elevator groups in the Protégé
System allow you to configure the floor groups that can be assigned to a users access level.
Selecting a Floor Group to Modify
Each floor group is assigned a unique floor group number from 001 to 250.
Floor Group to
modify: FG001
Type the appropriate 3-digit floor group number or use the [] and [] keys to scroll the
available floor groups. When the desired floor group appears on the screen, press [ENTER] to
program the selected floor group. The maximum number of floor groups that can be
programmed is limited by your system’s memory and configured profile.
Floor Group Name
If the selected floor group has a name associated (some floor groups do not have a name
associated with them) the name programming screen will be shown.
Protégé Integrated System Controller Reference Manual
68