PRT CTRL Integrated Controller Reference Manual

Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the
schedule displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
Secondary Elevator Group
A secondary elevator group can be selected that will be used when the schedule of the
elevator group that is programmed is not valid. The schedule of the secondary elevator group
must be valid or set to none. The secondary elevator group allows very powerful elevator
group controls to be placed on users during certain times of the day preventing access to
certain elevators.
EG001 Secondary
None
Use the [1] and [3] keys to scroll the secondary elevator group selection and press [ENTER]
to select the elevator group displayed. For more information about the list control data entry
refer to the section List Control Data Entry on Page 406. Programming a secondary elevator
group that uses the current elevator group being edited will perform no function.
Elevator Group Assignment Blocks 1 to 32
The elevator group assignment blocks assign an elevator car to the group that is being
programmed. Each block is 8 elevators and the number of elevator blocks that can be
programmed depends on the number of elevators that the system is configured to manage.
For example if there are 16 elevators there will be 2 blocks of 8 elevators. Block 1 option 1
will refer to Elevator 001 and Block 2 Option 8 will refer to Elevator 016.
EG001 Block 1
[12345678]
To modify the block setting options, follow the settings as explained in section Entering Data
Options on Page 409.Use the relevant key from 1 to 8 to toggle the elevator for the block.
Pressing the [ENTER] key will move you to the next block in the elevator group until you
return to the elevator group selection.
The following table shows the relationship between the block and the elevator that is being
selected for the elevator group. For example if you want to select Elevator 12 you would go to
block 2 and then press [4] to toggle the option.
Block Opt Opt Opt Opt Opt Opt Opt Opt
# 1 2 3 4 5 6 7 8
1
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
001 002 003 004 005 006 007 008
2
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
009 010 011 012 013 014 015 016
3
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
017 018 019 020 021 022 023 024
4
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
025 026 027 028 029 030 031 032
5
Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
033 034 035 036 037 038 039 040
6 Elevator Elevator Elevator Elevator Elevator Elevator Elevator Elevator
67 Protégé Integrated System Controller Reference Manual