PRT CTRL Integrated Controller Reference Manual

Elevator Groups
To access the elevator group programming login using a valid master code and then select
[MENU, 2, 7]. The screen displays “Elevator Grp to modify” as shown in the following
example. An elevator group is used to allow users access to certain groups of elevators within
a building. By programming an elevator group and a floor group you can limit a user to
specific floors on specific elevators.
Elevator Grp to
modify: EG001
Every time you press the [ENTER] key, the next screen appears. The different screens are
described in the following sub-sections. Programming the elevator groups in the Protégé
System allow you to configure the elevator cars that can be assigned to a user’s access level.
Selecting an Elevator Group to Modify
Each elevator group is assigned a unique elevator group number from 001 to 250.
Elevator Grp to
modify: EG001
Type the appropriate 3-digit elevator group number or use the [] and [] keys to scroll the
available elevator groups. When the desired elevator group appears on the screen, press
[ENTER] to program the selected door group. The maximum number of elevator groups that
can be programmed is limited by your system’s memory and configured profile.
Elevator Group Name
If the selected elevator group has a name associated (some elevator groups do not have a
name associated with them) the name programming screen will be shown.
EG001 Name
All Elevators
To scroll elevator groups by name use the [] and [] keys. To modify or enter a new name
for the selected elevator group use the keypad as explained in section Entering Text and
Names on Page 406 and press [ENTER].
By default the elevator group name will be prefixed by an '*' this indicates that the name is
an editable name in the system.
Operating Schedule
The operating schedule for the elevator group determines when the elevator group is valid
and if it will use a secondary elevator group if the schedule is not valid. A schedule is a series
of times and days that can be programmed to prevent the operating of functions based on a 7
day week and 24 hour clock. For more information on the programming of the schedule refer
to the Schedule Programming section on Page 344.
EG001 Schedule
None
Protégé Integrated System Controller Reference Manual
66