PRT CTRL Integrated Controller Reference Manual

Qualify PGM
You can assign a PGM to be used to qualify the access level. This can be used to prevent the
access level from operating denying a user access to the system. Programming a qualify PGM
also requires the appropriate option to be set for the way the qualification will be validated.
AL001 Qualify
pgm: --000:00
To modify the PGM, use the settings as explained in section Entering PGM on Page 410.
User Status
To access the user status menu login using a valid master code and then select [MENU, 2,
6]. The screen displays “Select user to view” as shown in the following example.
Select user to
view: UN00001
When you press the [ENTER] key the screen will change and display the last area that the
selected user is presently in. It will then provide a scrolling display with options that are
available. The different screens are described in the following sub-sections.
User Status Display
When the user is selected the screen will change and display the user that you selected last
area that they entered.
• The display will show the user name and then the first line of the text explaining
the current location of the selected user.
Master
Last entered
• The display will then scroll to the next display showing the area name that the user
is presently in. If the display shows the area "None" the user is considered to be
outside of the system.
into the area
None
• The final screen will display the reset options so that this user can be reset to a
known state and gain access. A user can be reset if they have entered or exited an
area without presenting their card generating an anti-passback violation.
Press [1] to
reset user.
65 Protégé Integrated System Controller Reference Manual