PRT CTRL Integrated Controller Reference Manual

Access Level to
modify: AL001
Type the appropriate 3-digit access level number or use the [] and [] keys to scroll the
available access levels. When the desired access level number appears on the screen, press
[ENTER] to program the selected access level number. The maximum number of access
levels that can be programmed is limited by your system’s memory and configured profile.
Access Level Name
If the selected access level has a name associated (some access levels do not have a name
associated with them) the name programming screen will be shown.
AL001 Name
Master
To scroll access levels by name use the [] and [] keys. To modify or enter a new name for
the selected access level use the keypad as explained in section Entering Text and Names on
Page 406 and press [ENTER].
By default the access level name will be prefixed by an '*' this indicates that the name is an
editable name in the system.
Operating Schedule
The operating schedule for the access level determines when the access level is valid. If the
operating schedule is not valid it will use the secondary access level if it is programmed. A
schedule is a series of times and days that can be programmed to prevent the operating of
functions based on a 7 day week and 24 hour clock. For more information on the
programming of the schedule refer to the Schedule Programming section on Page 344.
AL001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the
schedule displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
Secondary Access Level
A secondary access level can be selected that will be used when the schedule of the access
level that is programmed is not valid. The schedule of the secondary access level must be
valid or set to none.
AL001 Secondary
None
Use the [1] and [3] keys to scroll the secondary access level selection and press [ENTER] to
select the access level displayed. For more information about the list control data entry refer
to the section List Control Data Entry on Page 406. Programming a secondary access level
with the current access level being edited will perform no function.
61 Protégé Integrated System Controller Reference Manual