PRT CTRL Integrated Controller Reference Manual

DG001 Door to
modify: DR001
Type the appropriate 3-digit door number or use the [] and [] keys to scroll the available
doors in the door group. When the desired door number appears on the screen, press
[ENTER] to program the selected door.
Door Operation Schedule
The door operation schedule is assigned to each door within a door group by selecting the
door to edit. By setting a schedule for the door in a door group that door will only be valid if
the option is enabled and the schedule is valid. This allows for example a door to be access by
a user only between certain times while other doors are always able to be accessed. A
schedule is a series of 4 periods of start/end time and days that can be programmed based on
a 7 day week and 24 hour clock. A schedule is valid when the time of day falls between any
start and end time provided the day of the week is selected and holidays are not affecting the
schedule. For more information on the programming of the schedule refer to the Schedule
Programming section on Page 344.
DR001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the
schedule displayed. For more information about the list control data entry refer to the section
List Control Data Entry on Page 406.
A schedule selection of NONE will disable the schedule checking function and allow the door to
operate 24HRS within the group provided it has been selected.
Once a schedule has been selected you will be taken back to the door to select screen. For
convenience we recommend using the Protégé System Management Suite for effective
management of door groups and schedules.
Access Level
To access the access level programming login using a valid master code and then select
[MENU, 2, 5]. The screen displays “Access Level to modify” as shown in the following
example.
Access Level to
modify: AL001
Every time you press the [ENTER] key, the next screen appears. The different screens are
described in the following sub-sections. Programming the access level in the Protégé System
allows you to configure how user will interact with the system and the options each user will
have.
Selecting an Access Level to Modify
Each access level is assigned a unique access level number from 001 to 250.
Protégé Integrated System Controller Reference Manual
60