PRT CTRL Integrated Controller Reference Manual

Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Menu Group Extra 2 Menu Options
All of the options in the extra 2 section are currently reserved for future use and expansion.
MG001 Extra 2
[--------]
To modify options, follow the settings as explained in section Entering Data Options on Page
409.Use the relevant key from 1 to 8 to toggle the state of the option.
Option 1, 2, 3, 4, 5, 6, 7 and 8 - Reserved
Reserved.
Reserved.
It is recommended not to enable/disable or modify the settings of reserved options.
Area Groups
To access the area group programming login using a valid master code and then select
[MENU, 2, 3]. The screen displays “Area Group to modify” as shown in the following
example.
Area group to
modify: AG001
Every time you press the Enter key, the next screen appears. The different screens are
described in the following sub-sections. Programming the area groups in the Protégé System
allow you to configure how a user will interact with the areas in the system and what areas
they are able to access.
Selecting an Area Group to Modify
Each area group is assigned a unique area group number from 001 to 250.
Area Group to
modify: AG001
Type the appropriate 3-digit area group number or use the [] and [] keys to scroll the
available area groups. When the desired area group number appears on the screen, press
[ENTER] to program the selected area group. The maximum number of area groups that can
be programmed is limited by your system’s memory and configured profile.
Area Group Name
If the selected area group has a name associated (some area groups do not have a name
associated with them) the name programming screen will be shown.
55 Protégé Integrated System Controller Reference Manual