PRT CTRL Integrated Controller Reference Manual

Option 1 – User Area is a Group
When this option is enabled the users area selection screen will change to a
group selection allowing multiple areas to be controlled by the user area group
configuration.
Enabled the user area will be set as a group.
Disabled the user area selection will be an individual area.
Option 2 - Reserved
Reserved do not modify.
Reserved do not modify.
Option 3 - Super User Code
Enabled the user is assigned a super user status that allows them to
override dual code functions and anti-passback violations.
Disabled the user does not have super user status.
Option 4 - User Can Modify Own Code
Enabled the user will be able to modify their own code. The user must have
access to the user menu. The user can not modify any access or other
functions.
Disabled the user can not modify their own code.
Option 5 - Reserved
Reserved do not modify.
Reserved do not modify.
Option 6 - Loiter Mode User
When enabled the user has access to any loiter area for a limited amount of
time. If the loiter time has elapsed and the user did not exit the area, then
the user cannot exit the area until a master user resets the user’s loiter
time.
For this option to work the Loiter Mode option must be turned on for each
area that requires this function. A loiter time and a loiter area must also be
programmed. Furthermore, the area requires an entry and exit reader set
with the anti-passback feature to control the user traffic.
The loiter mode is ideal for use in car park control to prevent multi level car
parks that have both tenant and Public car parks from being used by
tenants.
Disabled the user will not operate in a loiter mode when entering a area
programmed with the loiter option.
Protégé Integrated System Controller Reference Manual
48