PRT CTRL Integrated Controller Reference Manual

• Once the screen returns to the facility id entry screen as shown below presenting a
card to a reader will program the card in to the system and automatically
increment the user number. The facility and the card number will be programmed
when the auto loading is enabled.
UN00001 Facility
id: 4294967295
• To disable the automatic card loading mode press the [ARM] key which will toggle
the automatic card loading mode back to disabled.
Autoload mode
disabled.
User Secondary Family / Facility Number
Each user can be assigned two separate cards. To program a second card enter the family
number of the card and then press [ENTER].
UN00001 2nd Fac
id: 4294967295
The number 4294967295 is the maximum facility code and is a reserved number,
setting this number will disable the card for this user.
User Secondary Card Number
Each user can be assigned two separate cards. To program a second card enter the family
number of the card and then press [ENTER].
UN00001 2nd Card
no: 4294967295
The card number when blank or deleted is shown as the maximum card number of
4294967295 and to default or clear the card number press the [DISARM] key.
User Language
Each User can be programmed with a default language that will be loaded by the System
Controller when they log into a keypad.
UN00001 Language
None
If no language is selected the default panel language will be displayed.
User Miscellaneous Options
Options that relate to general functions of the user can be set using option entry.
45 Protégé Integrated System Controller Reference Manual