PRT CTRL Integrated Controller Reference Manual

It is recommended to change the Master and Installer login codes to protect your system
from unlawful access.
Caution is required when modifying users, menu groups, door groups, area groups
and access levels. Changing the master and installer menu items can lock out these
special users from the system. To gain access you will need to default the system.
User Programming
To access the user programming login using a valid master code and then select [MENU, 2,
1]. The screen displays “Select user to modify” as shown in the following example.
Select user to
modify: UN00001
Every time you press the Enter key, the next screen appears. The different screens are
described in the following sub-sections. Programming the users in the protégé allow you to
configure how user will interact with the system and the options each user will have.
When programming a user that will require the loiter feature to be enabled the users expiry
time will be reduced to a date only and you will not be able to set a time for the user. The
time is used to control the loiter time that this user will be allocated in the loiter areas.
Selecting a User to Modify
Each user is assigned a unique user number from 00001 to 65535. When selecting a user to
modify the user number who logged in to the keypad will be shown.
Select user to
modify: UN00001
Type the appropriate 5-digit user number or use the [] and [] keys to scroll the available
user numbers. When the desired user number appears on the screen, press [ENTER] to
program the selected user number. The maximum number of users that can be programmed
is limited by your system’s memory and configured profile.
User Names
If the selected user has a name associated (some users do not have a name associated with
them) the name programming screen will be shown.
UN00001 Name
Master
To scroll users by name use the [] and [] keys. To modify or enter a new name for the
selected user use the keypad as explained in section Entering Text and Names on Page 406
and press [ENTER].
By default the user name will be prefixed by an '*' this indicates that the name is an editable
name in the system. Some users do not have names, this is limited by the system memory
and the profile configured.
Protégé Integrated System Controller Reference Manual
40