PRT CTRL Integrated Controller Reference Manual

UN00001 User
code: _
Pressing the [2], [5], [8], [0] will insert the new PIN number in the location we just cleared
using the [DISARM] key.
UN00001 User
code: 2580_
To save the PIN number press the [ENTER] key or use another navigation key to move off
the screen and the number will be automatically saved.
If you have not moved off the screen and want to recall the previous PIN number setting you
can press the [ARM] key.
Date and Time Data Entry
Date and time entries are used widely in the Protégé System when configuring Schedules,
Users and general configuration parameters.
In some cases to disable a feature that is related to a date or time entry the actual date and
time field is used to activate the function that it provides. For example in the panel test report
time screen a time configuration set to –-:-- will result in the test report being disabled.
To clear the time or date setting press the [DISARM] key. The display will show the --:-- for
the time and --/--/---- for the date entry.
Test report
time: 02:00
In the example below we will be setting the test report time in the panel configuration section
to 3:30pm. The Protégé accepts entries for all programmable time and date information in
military format. Display of the time on the LCD display can be configured for a 12 hour clock
however this is a display feature only.
Test report
time: 02:00
The cursor will be located on the first digit of the hour field. Press the [1] key to program the
first digit followed by the [5], [3] and [0]. The display will now show 15:30 on the screen as
below.
Test report
time: 15:30
The new value will be programmed when the [ENTER] key is pressed or another navigation
key is pressed moving screens.
407 Protégé Integrated System Controller Reference Manual