PRT CTRL Integrated Controller Reference Manual

DATA REGISTER DEFINITIONS
Introduction
Memory registers are locations of memory that can be used to store information, calculate
information or provide links to the analog values from the PRT-ADC4 and PRT-DAC4 analog
control modules. Memory registers can be used as part of programmable functions to perform
actions and calculations and are access either in a Boolean Mode (Bits) or Data Mode (Word
Value).
A memory register can refer to a decimal value from 0-65,535. When used in programmable
functions a memory register will hold either a 0 or 1 in the appropriate bit or a value from 0-
65,535.
Read/Write Memory Registers
Read and write general memory registers can be used to perform logic actions or other
functions and are global throughout the protégé system controller.
Memory
Register
MR00000
Description
General Purpose Memory Register MR00000 can
be used in any location.
Type
Boolean Values
0 and 1 and
decimal values
up
to
4,294,836,225.
| | | | | | | | |
MR00250 General Purpose Memory Register MR00250 can
be used in any location.
Boolean Values
0 and 1 and
decimal values
up
to
4,294,836,225.
401 Protégé Integrated System Controller Reference Manual