PRT CTRL Integrated Controller Reference Manual

Analog Input/Output Expander
The Analog expander will report trouble zones from 1 to 8 on the first 2 modules, all modules
above address AE002 will be reported using the default code of 999.
Zone Number Contact ID Code Reporting Point Number
AE001:01 145 (Module Tamper) 965
AE001:02 312 (Analog Voltage Low) 966
AE001:03 312 (Auxiliary Fuse) 967
AE001:04 140 (General Alarm) 968
AE001:05 140 (General Alarm) 969
AE001:06 140 (General Alarm) 970
AE001:07 140 (General Alarm) 971
AE001:08 143 (Module Offline) 972
AE002:01 143 (Module Tamper) 973
| | | | | | | |
AE002:08 143 (Module Offline) 980
AE003:01 145 (Module Tamper) 999
| | | | | | | |
AE250:16 143 (Module Offline) 999
In the above table a reporting code of 999 indicates that the trouble zone is outside the
maximum trouble zones that can be reported for the module type.
SIA Level 2 Standard Zones
The following tables show the reporting codes for the zones when the SIA Level 2 reporting
format is used (Table 000, Default). The standard table is suited to both access control and
burglary installations as it allows the reporting of all points available in the system.
Please refer to the section Reporting Codes on page XX for additional information on the
reporting codes used for SIA.
Control Panel Zones
The control panel will report all zones from 1 to 16 using any of the available table
configurations.
Zone Number Alarm Code Restore Code Reporting Point Number
CP001:01 BA BR 0001
CP001:02 BA BR 0002
CP001:03 BA BR 0003
CP001:04 BA BR 0004
CP001:05 BA BR 0005
CP001:06 BA BR 0006
CP001:07 BA BR 0007
CP001:08 BA BR 0008
CP001:09 BA BR 0009
CP001:10 BA BR 0010
CP001:11 BA BR 0011
CP001:12 BA BR 0012
CP001:13 BA BR 0013
CP001:14 BA BR 0014
CP001:15 BA BR 0015
CP001:16 BA BR 0016
Protégé Integrated System Controller Reference Manual
370