PRT CTRL Integrated Controller Reference Manual

• When the area group arming process is completed the display will return to the
area group control screen.
• Press the [] key to return to the area status display.
• Press the [CLEAR] key to exit or the [MENU] key to select another menu option or
function.
Area Group Disarming
Area group processing allows you to arm or disarm a group of areas rather than one area at a
time. The area group controlled is the area group assigned to the keypad used to access the
system. To disarm the area group the user must be able to access ALL the areas in the area
group. The user must have the access area group option enabled to access the area group
function.
• Access the area status display screen as explained in section Area Status Display
on page 29.
*Area 001
is DISARMED
• From the Area Status screen, press the [] key to select the Area group control
screen.
Press [ARM] or
[DISARM] to
The screen will scroll between the screen above and below prompting the user to
press the [ARM] or [DISARM] key to control the area group that is shown.
control group
*Area Group 001
Arming Failure
• From the Area Group Control screen, press the [DISARM] key to disarm the
selected area group. Pressing the [DISARM] key starts the disarming process for
each area in the area group.
• When the area group disarming process is completed the display will return to the
area group control screen.
• Press the [] key to return to the area status display.
• Press the [CLEAR] key to exit or the [MENU] key to select another menu option or
function.
There are a number of reasons why an area might fail to arm, such as zones within the area
that remain open, or a trouble condition within the system. The different arming failures and
possible user actions are described in the following sections.
Protégé Integrated System Controller Reference Manual
36