PRT CTRL Integrated Controller Reference Manual

• Pressing the [2] key will remove the bypass and pressing the [3] key will bypass
the zone in a latched state requiring that the bypass is removed manually before it
will operate again.
The Protégé System also allows you to search for a zone based on the zone text that
is programmed. To use the search functionality press the [MEMORY] key.
Bypassing Trouble Zones
To bypass trouble zones select [MENU, 7, 2] then using the [] and [] arrows to scroll the
available trouble zones. A trouble zone can be bypassed by pressing the [1] key to bypass
the trouble zone and then the [2] key to remove the trouble zone bypass. A trouble zone can
also be bypassed in latch mode by pressing the [3] key. If a trouble zone is bypassed
normally [1] the trouble zone bypass will be removed the next time the area disarms, please
note that all areas that have this trouble zone programmed must disarm for the bypass to be
removed.
• Select the bypass trouble zone menu [MENU, 7, 2]. The display will show the first
trouble zone in the system.
CP001:01 T-Zone
is not BYPASSED
• If a normal bypass is required press the [1] key the trouble zone will then toggle
state and the display will show the bypassed message below.
CP001:01 T-Zone
is BYPASSED
• Pressing the [2] key will remove the bypass and pressing the [3] key will bypass
the trouble zone in a latched state requiring that the bypass is removed manually
before it will operate again.
Protégé Integrated System Controller Reference Manual
356