PRT CTRL Integrated Controller Reference Manual

Holiday to
modify: HL001
Every time you press the Enter key, the next screen appears. The different screens are
described in the following sub-sections. Programming the holiday settings in the Protégé
System allow you to prevent schedules from operating on a public holiday or pre-defined
holidays.
Selecting Holiday to Modify
Each holiday entry is assigned a unique holiday number from 001 to 250.
Holiday to
modify: HL001
Type the appropriate 3-digit holiday number or use the [] and [] keys to scroll the
available holiday entries. When the desired holiday number appears on the screen, press
[ENTER] to program the selected holiday entry. The maximum number of holidays that can
be programmed is limited by your system’s memory and configured profile.
Holiday Name
If the selected holiday entry has a name associated (some holiday entries may not have a
name associated with them) the name programming screen will be shown.
HL001 Name
*Holiday 001
To scroll holiday entries by name use the [] and [] keys. To modify or enter a new name
for the selected holiday item use the keypad as explained in section Entering Text and Names
on Page 406 and press [ENTER].
By default the holiday name will be prefixed by an '*' this indicates that the name is an
editable name in the system.
Holiday Start Date
Program a starting date for the holiday. To make the starting date occur annually leave the
year blank (----).
HL001 Start
Date: --/--/----
To modify the holiday starting date use the keypad as explained in the section Entering Time
and Date Values on Page 405 and press [ENTER].
Holiday End Date
Program an ending date for the holiday. To make the ending date occur annually leave the
year blank (----).
HL001 End
Date: --/--/----
Protégé Integrated System Controller Reference Manual
350