PRT CTRL Integrated Controller Reference Manual

Every time you press the Enter key, the next screen appears. The different screens are
described in the following sub-sections. Programming the schedule settings in the Protégé
System allow you to use these schedules to control operations by the time of day and day of
the week.
Displaying Schedule Status
It is possible to show the current status of the schedule. This allows you to see if the schedule
is active and valid, if the start time is currently valid and the end time is valid.
Schedule to
modify: SC001
Type the appropriate 3-digit schedule number or use the [] and [] keys. When the desired
schedule appears on the screen, press the [ARM] key to display information on the selected
schedule. The screen will now display status information about the schedule. Press any other
key to return to the schedule selection window.
S: VSE
YYn
The display above represents the following information for the selected schedule:
V
S
E
A 'Y' (yes) under the V means the schedule is valid.
A 'Y' (yes) under the S means the start time of a period in the
schedule is valid.
A 'Y' (yes) under the S means the end time of a period in the
schedule is valid.
Selecting an Schedule Entry to Modify
Each schedule entry is assigned a unique schedule number from 001 to 250.
Schedule to
modify: SC001
Type the appropriate 3-digit schedule number or use the [] and [] keys to scroll the
available schedule entries. When the desired schedule number appears on the screen, press
[ENTER] to program the selected schedule entry. The maximum number of schedules that
can be programmed is limited by your system’s memory and configured profile.
Schedule Name
If the selected schedule entry has a name associated (some schedule entries may not have a
name associated with them) the name programming screen will be shown.
SC001 Name
*Schedule 001
To scroll schedule entries by name use the [] and [] keys. To modify or enter a new name
for the selected schedule item use the keypad as explained in section Entering Text and
Names on Page 406 and press [ENTER].
345 Protégé Integrated System Controller Reference Manual