PRT CTRL Integrated Controller Reference Manual

The display will show the door input states listed below.
CLOSED
OPEN
FORCED
PREALM
LEFTOP
Door is closed.
Door is open.
Door is forced open.
Door is in a pre-alarm open condition.
Door has been left open.
The display will show the door lock states listed below.
LOCKED
ACCESS
SCHED
TIMED
LATCH
ENTRY
EXIT
MENU
AREA
FIRE
Lock PGM is deactivated.
Lock PGM is activated by a user entry.
Lock PGM is activated by schedule.
Lock PGM is activated for time period by manual control.
Lock PGM is activated latched by manual control.
Lock PGM is activated request to enter.
Lock PGM is activated request to exit.
Lock PGM is activated keypad control.
Lock PGM is activated by area.
Lock PGM is activated by fire control programmable function.
Viewing Elevator Floor Status
Viewing the floor status is identical to viewing the floor status under the control menu in the
advanced section. Login using a valid code and then select [MENU, 5, 5]. The screen displays
“Elevator to view” as shown in the following example.
Elevator to
view: EL001
Type the appropriate elevator number or use the [] and [] keys to scroll the available
elevators. When the desired elevator number appears on the screen, press [ENTER] to select
the floor on the elevator to control.
Floor Selection
Once the elevator has been selected you can now select the floor to control on the elevator by
using the up and down keys.
EL001 Floor to
view: FL001
Type the appropriate floor number or use the [] and [] keys to scroll the available floors
for the selected elevator. When the desired floor number appears on the screen, press
[ENTER] to view and control the selected floor number.
Floor Control and Status Display
Each floor will display the status of the floor inputs that are controlling the door and the state
of the lock output that is controlled by the door configuration.
*Floor 001
(Locked)
341 Protégé Integrated System Controller Reference Manual